Inline encryption hardware sits logically between memory and the disk, and can en/decrypt data as it goes in/out of the disk. Inline encryption hardware has a fixed number of “keyslots” - slots into which encryption contexts (i.e. the encryption key, encryption algorithm, data unit size) can be programmed by the kernel at any time. Each request sent to the disk can be tagged with the index of a keyslot (and also a data unit number to act as an encryption tweak), and the inline encryption hardware will en/decrypt the data in the request with the encryption context programmed into that keyslot. This is very different from full disk encryption solutions like self encrypting drives/TCG OPAL/ATA Security standards, since with inline encryption, any block on disk could be encrypted with any encryption context the kernel chooses.
We want to support inline encryption (IE) in the kernel. To allow for testing, we also want a crypto API fallback when actual IE hardware is absent. We also want IE to work with layered devices like dm and loopback (i.e. we want to be able to use the IE hardware of the underlying devices if present, or else fall back to crypto API en/decryption).
Constraints and notes¶
IE hardware has a limited number of “keyslots” that can be programmed with an encryption context (key, algorithm, data unit size, etc.) at any time. One can specify a keyslot in a data request made to the device, and the device will en/decrypt the data using the encryption context programmed into that specified keyslot. When possible, we want to make multiple requests with the same encryption context share the same keyslot.
We need a way for upper layers like filesystems to specify an encryption context to use for en/decrypting a struct bio, and a device driver (like UFS) needs to be able to use that encryption context when it processes the bio.
We need a way for device drivers to expose their inline encryption capabilities in a unified way to the upper layers.
We add a
struct bio_crypt_ctx to
struct bio that can
represent an encryption context, because we need to be able to pass this
encryption context from the upper layers (like the fs layer) to the
device driver to act upon.
While IE hardware works on the notion of keyslots, the FS layer has no knowledge of keyslots - it simply wants to specify an encryption context to use while en/decrypting a bio.
We introduce a keyslot manager (KSM) that handles the translation from encryption contexts specified by the FS to keyslots on the IE hardware. This KSM also serves as the way IE hardware can expose its capabilities to upper layers. The generic mode of operation is: each device driver that wants to support IE will construct a KSM and set it up in its struct request_queue. Upper layers that want to use IE on this device can then use this KSM in the device’s struct request_queue to translate an encryption context into a keyslot. The presence of the KSM in the request queue shall be used to mean that the device supports IE.
The KSM uses refcounts to track which keyslots are idle (either they have no encryption context programmed, or there are no in-flight struct bios referencing that keyslot). When a new encryption context needs a keyslot, it tries to find a keyslot that has already been programmed with the same encryption context, and if there is no such keyslot, it evicts the least recently used idle keyslot and programs the new encryption context into that one. If no idle keyslots are available, then the caller will sleep until there is at least one.
blk-mq changes, other block layer changes and blk-crypto-fallback¶
We add a pointer to a
struct request. These will be referred to as the
for the request. This
keyslot is the keyslot into which the
bi_crypt_context has been programmed in the KSM of the
that this request is being sent to.
block/blk-crypto-fallback.c, which allows upper layers to remain
blissfully unaware of whether or not real inline encryption hardware is present
underneath. When a bio is submitted with a target
request_queue that doesn’t
support the encryption context specified with the bio, the block layer will
en/decrypt the bio with the blk-crypto-fallback.
If the bio is a
WRITE bio, a bounce bio is allocated, and the data in the bio
is encrypted stored in the bounce bio - blk-mq will then proceed to process the
bounce bio as if it were not encrypted at all (except when blk-integrity is
blk-crypto-fallback sets the bounce bio’s
bi_end_io to an
internal function that cleans up the bounce bio and ends the original bio.
If the bio is a
READ bio, the bio’s
bi_end_io (and also
is saved and overwritten by
bio_crypto_fallback_decrypt_bio. The bio’s
bi_crypt_context is also
NULL, so that to the rest of the stack, the bio looks
as if it was a regular bio that never had an encryption context specified.
bio_crypto_fallback_decrypt_bio will decrypt the bio, restore the original
bi_end_io (and also
bi_private) and end the bio again.
Regardless of whether real inline encryption hardware is used or the blk-crypto-fallback is used, the ciphertext written to disk (and hence the on-disk format of data) will be the same (assuming the hardware’s implementation of the algorithm being used adheres to spec and functions correctly).
request queue’s inline encryption hardware claimed to support the
encryption context specified with a bio, then it will not be handled by the
blk-crypto-fallback. We will eventually reach a point in blk-mq when a
struct request needs to be allocated for that bio. At that point,
blk-mq tries to program the encryption context into the
keyslot_manager, and obtain a keyslot, which it stores in its newly added
keyslot field. This keyslot is released when the request is completed.
When the first bio is added to a request,
blk_crypto_rq_bio_prep is called,
which sets the request’s
crypt_ctx to a copy of the bio’s
bi_crypt_context. bio_crypt_do_front_merge is called whenever a subsequent
bio is merged to the front of the request, which updates the
the request so that it matches the newly merged bio’s
bi_crypt_context. In particular, the request keeps a copy of the
bi_crypt_context of the first
bio in its bio-list (blk-mq needs to be careful to maintain this invariant
during bio and request merges).
To make it possible for inline encryption to work with request queue based
layered devices, when a request is cloned, its
crypto fields are cloned as
well. When the cloned request is submitted, blk-mq programs the
bi_crypt_context of the request into the clone’s request_queue’s keyslot
manager, and stores the returned keyslot in the clone’s
API presented to users of the block layer¶
struct blk_crypto_key represents a crypto key (the raw key, size of the
key, the crypto algorithm to use, the data unit size to use, and the number of
bytes required to represent data unit numbers that will be specified with the
blk_crypto_init_key allows upper layers to initialize such a
bio_crypt_set_ctx should be called on any bio that a user of
the block layer wants en/decrypted via inline encryption (or the
blk-crypto-fallback, if hardware support isn’t available for the desired
crypto configuration). This function takes the
blk_crypto_key and the
data unit number (DUN) to use when en/decrypting the bio.
blk_crypto_config_supported allows upper layers to query whether or not the
an encryption context passed to request queue can be handled by blk-crypto
(either by real inline encryption hardware, or by the blk-crypto-fallback).
This is useful e.g. when blk-crypto-fallback is disabled, and the upper layer
wants to use an algorithm that may not supported by hardware - this function
lets the upper layer know ahead of time that the algorithm isn’t supported,
and the upper layer can fallback to something else if appropriate.
blk_crypto_start_using_key - Upper layers must call this function on
blk_crypto_key and a
request_queue before using the key with any bio
headed for that
request_queue. This function ensures that either the
hardware supports the key’s crypto settings, or the crypto API fallback has
transforms for the needed mode allocated and ready to go. Note that this
function may allocate an
skcipher, and must not be called from the data
path, since allocating
skciphers from the data path can deadlock.
blk_crypto_evict_key must be called by upper layers before a
blk_crypto_key is freed. Further, it must only be called only once
there are no more in-flight requests that use that
blk_crypto_evict_key will ensure that a key is removed from any keyslots in
inline encryption hardware that the key might have been programmed into (or the blk-crypto-fallback).
API presented to device drivers¶
struct blk_keyslot_manager should be set up by device drivers in
request_queue of the device. The device driver needs to call
blk_ksm_init on the
blk_keyslot_manager, which specifying the number of
keyslots supported by the hardware.
The device driver also needs to tell the KSM how to actually manipulate the
IE hardware in the device to do things like programming the crypto key into
the IE hardware into a particular keyslot. All this is achieved through the
struct blk_ksm_ll_ops field in the KSM that the device driver
must fill up after initing the
The KSM also handles runtime power management for the device when applicable
(e.g. when it wants to program a crypto key into the IE hardware, the device
must be runtime powered on) - so the device driver must also set the
field in the ksm to point to the struct device for the KSM to use for runtime
blk_ksm_reprogram_all_keys can be called by device drivers if the device
needs each and every of its keyslots to be reprogrammed with the key it
“should have” at the point in time when the function is called. This is useful
e.g. if a device loses all its keys on runtime power down/up.
blk_ksm_destroy should be called to free up all resources used by a keyslot
blk_ksm_init, once the
blk_keyslot_manager is no longer
Request queue based layered devices like dm-rq that wish to support IE need to
create their own keyslot manager for their request queue, and expose whatever
functionality they choose. When a layered device wants to pass a clone of that
request to another
request_queue, blk-crypto will initialize and prepare the
clone as necessary - see
Future Optimizations for layered devices¶
Creating a keyslot manager for a layered device uses up memory for each keyslot, and in general, a layered device merely passes the request on to a “child” device, so the keyslots in the layered device itself are completely unused, and don’t need any refcounting or keyslot programming. We can instead define a new type of KSM; the “passthrough KSM”, that layered devices can use to advertise an unlimited number of keyslots, and support for any encryption algorithms they choose, while not actually using any memory for each keyslot. Another use case for the “passthrough KSM” is for IE devices that do not have a limited number of keyslots.
Interaction between inline encryption and blk integrity¶
At the time of this patch, there is no real hardware that supports both these features. However, these features do interact with each other, and it’s not completely trivial to make them both work together properly. In particular, when a WRITE bio wants to use inline encryption on a device that supports both features, the bio will have an encryption context specified, after which its integrity information is calculated (using the plaintext data, since the encryption will happen while data is being written), and the data and integrity info is sent to the device. Obviously, the integrity info must be verified before the data is encrypted. After the data is encrypted, the device must not store the integrity info that it received with the plaintext data since that might reveal information about the plaintext data. As such, it must re-generate the integrity info from the ciphertext data and store that on disk instead. Another issue with storing the integrity info of the plaintext data is that it changes the on disk format depending on whether hardware inline encryption support is present or the kernel crypto API fallback is used (since if the fallback is used, the device will receive the integrity info of the ciphertext, not that of the plaintext).
Because there isn’t any real hardware yet, it seems prudent to assume that hardware implementations might not implement both features together correctly, and disallow the combination for now. Whenever a device supports integrity, the kernel will pretend that the device does not support hardware inline encryption (by essentially setting the keyslot manager in the request_queue of the device to NULL). When the crypto API fallback is enabled, this means that all bios with and encryption context will use the fallback, and IO will complete as usual. When the fallback is disabled, a bio with an encryption context will be failed.