Kernel driver tps40422

Supported chips:

Author: Zhu Laiwen <richard.zhu@nsn.com>

Description

This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck Controller with PMBus

The driver is a client driver to the core PMBus driver. Please see Kernel driver pmbus for details on PMBus client drivers.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Platform data support

The driver supports standard PMBus driver platform data.

Sysfs entries

The following attributes are supported.

in[1-2]_label

"vout[1-2]"

in[1-2]_input

Measured voltage. From READ_VOUT register.

in[1-2]_alarm

voltage alarm.

curr[1-2]_input

Measured current. From READ_IOUT register.

curr[1-2]_label

"iout[1-2]"

curr1_max

Maximum current. From IOUT_OC_WARN_LIMIT register.

curr1_crit

Critical maximum current. From IOUT_OC_FAULT_LIMIT register.

curr1_max_alarm

Current high alarm. From IOUT_OC_WARN_LIMIT status.

curr1_crit_alarm

Current critical high alarm. From IOUT_OC_FAULT status.

curr2_alarm

Current high alarm. From IOUT_OC_WARNING status.

temp1_input

Measured temperature. From READ_TEMPERATURE_2 register on page 0.

temp1_max

Maximum temperature. From OT_WARN_LIMIT register.

temp1_crit

Critical high temperature. From OT_FAULT_LIMIT register.

temp1_max_alarm

Chip temperature high alarm. Set by comparing READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING status is set.

temp1_crit_alarm

Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set.

temp2_input

Measured temperature. From READ_TEMPERATURE_2 register on page 1.

temp2_alarm

Chip temperature alarm on page 1.