Qt Test Overview

Qt Test is a framework for unit testing Qt based applications and libraries. Qt Test provides all the functionality commonly found in unit testing frameworks as well as extensions for testing graphical user interfaces.

Qt Test is designed to ease the writing of unit tests for Qt based applications and libraries:

FeatureDetails
LightweightQt Test consists of about 6000 lines of code and 60 exported symbols.
Self-containedQt Test requires only a few symbols from the Qt Core module for non-gui testing.
Rapid testingQt Test needs no special test-runners; no special registration for tests.
Data-driven testingA test can be executed multiple times with different test data.
Basic GUI testingQt Test offers functionality for mouse and keyboard simulation.
BenchmarkingQt Test supports benchmarking and provides several measurement back-ends.
IDE friendlyQt Test outputs messages that can be interpreted by Qt Creator, Visual Studio, and KDevelop.
Thread-safetyThe error reporting is thread safe and atomic.
Type-safetyExtensive use of templates prevent errors introduced by implicit type casting.
Easily extendableCustom types can easily be added to the test data and test output.

You can use a Qt Creator wizard to create a project that contains Qt tests and build and run them directly from Qt Creator. For more information, see Running Autotests.

Creating a Test

To create a test, subclass QObject and add one or more private slots to it. Each private slot is a test function in your test. QTest::qExec() can be used to execute all test functions in the test object.

In addition, you can define the following private slots that are not treated as test functions. When present, they will be executed by the testing framework and can be used to initialize and clean up either the entire test or the current test function.

  • initTestCase() will be called before the first test function is executed.
  • initTestCase_data() will be called to create a global test data table.
  • cleanupTestCase() will be called after the last test function was executed.
  • init() will be called before each test function is executed.
  • cleanup() will be called after every test function.

Use initTestCase() for preparing the test. Every test should leave the system in a usable state, so it can be run repeatedly. Cleanup operations should be handled in cleanupTestCase(), so they get run even if the test fails.

Use init() for preparing a test function. Every test function should leave the system in a usable state, so it can be run repeatedly. Cleanup operations should be handled in cleanup(), so they get run even if the test function fails and exits early.

Alternatively, you can use RAII (resource acquisition is initialization), with cleanup operations called in destructors, to ensure they happen when the test function returns and the object moves out of scope.

If initTestCase() fails, no test function will be executed. If init() fails, the following test function will not be executed, the test will proceed to the next test function.

Example:

 class MyFirstTest: public QObject
 {
     Q_OBJECT

 private:
     bool myCondition()
     {
         return true;
     }

 private slots:
     void initTestCase()
     {
         qDebug("Called before everything else.");
     }

     void myFirstTest()
     {
         QVERIFY(true); // check that a condition is satisfied
         QCOMPARE(1, 1); // compare two values
     }

     void mySecondTest()
     {
         QVERIFY(myCondition());
         QVERIFY(1 != 2);
     }

     void cleanupTestCase()
     {
         qDebug("Called after myFirstTest and mySecondTest.");
     }
 };

Finally, if the test class has a static public void initMain() method, it is called by the QTEST_MAIN macros before the QApplication object is instantiated. For example, this allows for setting application attributes like Qt::AA_DisableHighDpiScaling. This was added in 5.14.

For more examples, refer to the Qt Test Tutorial.

Increasing Test Function Timeout

QtTest limits the run-time of each test to catch infinite loops and similar bugs. By default, any test function call will be interrupted after five minutes. For data-driven tests, this applies to each call with a distinct data-tag. This timeout can be configured by setting the QTEST_FUNCTION_TIMEOUT environment variable to the maximum number of milliseconds that is acceptable for a single call to take. If a test takes longer than the configured timeout, it is interrupted, and qFatal() is called. As a result, the test aborts by default, as if it had crashed.

To set QTEST_FUNCTION_TIMEOUT from the command line on Linux or macOS, enter:

 QTEST_FUNCTION_TIMEOUT=900000
 export QTEST_FUNCTION_TIMEOUT

On Windows:

 SET QTEST_FUNCTION_TIMEOUT=900000

Then run the test inside this environment.

Alternatively, you can set the environment variable programmatically in the test code itself, for example by calling, from the initMain() special method of your test class:

 qputenv("QTEST_FUNCTION_TIMEOUT", "900000");

To calculate a suitable value for the timeout, see how long the test usually takes and decide how much longer it can take without that being a symptom of some problem. Convert that longer time to milliseconds to get the timeout value. For example, if you decide that a test that takes several minutes could reasonably take up to twenty minutes, for example on a slow machine, multiply 20 * 60 * 1000 = 1200000 and set the environment variable to 1200000 instead of the 900000 above.

Building a Test

You can build an executable that contains one test class that typically tests one class of production code. However, usually you would want to test several classes in a project by running one command.

See Writing a Unit Test for a step by step explanation.

Building with CMake and CTest

You can use Building with CMake and CTest to create a test. CTest enables you to include or exclude tests based on a regular expression that is matched against the test name. You can further apply the LABELS property to a test and CTest can then include or exclude tests based on those labels. All labeled targets will be run when test target is called on the command line.

Note: On Android, if you have one connected device or emulator, tests will run on that device. If you have more than one device connected, set the environment variable ANDROID_DEVICE_SERIAL to the ADB serial number of the device that you want to run tests on.

There are several other advantages with CMake. For example, the result of a test run can be published on a web server using CDash with virtually no effort.

CTest scales to very different unit test frameworks, and works out of the box with QTest.

The following is an example of a CMakeLists.txt file that specifies the project name and the language used (here, mytest and C++), the Qt modules required for building the test (Qt5Test), and the files that are included in the test (tst_mytest.cpp).

 project(mytest LANGUAGES CXX)

 find_package(Qt5Test REQUIRED)

 set(CMAKE_INCLUDE_CURRENT_DIR ON)

 set(CMAKE_AUTOMOC ON)

 enable_testing(true)

 add_executable(mytest tst_mytest.cpp)
 add_test(NAME mytest COMMAND mytest)

 target_link_libraries(mytest PRIVATE Qt5::Test)

For more information about the options you have, see Build with CMake.

Building with qmake

If you are using qmake as your build tool, just add the following to your project file:

 QT += testlib

If you would like to run the test via make check, add the additional line:

 CONFIG += testcase

To prevent the test from being installed to your target, add the additional line:

 CONFIG += no_testcase_installs

See the qmake manual for more information about make check.

Building with Other Tools

If you are using other build tools, make sure that you add the location of the Qt Test header files to your include path (usually include/QtTest under your Qt installation directory). If you are using a release build of Qt, link your test to the QtTest library. For debug builds, use QtTest_debug.

Qt Test Command Line Arguments

Syntax

The syntax to execute an autotest takes the following simple form:

 testname [options] [testfunctions[:testdata]]...

Substitute testname with the name of your executable. testfunctions can contain names of test functions to be executed. If no testfunctions are passed, all tests are run. If you append the name of an entry in testdata, the test function will be run only with that test data.

For example:

 /myTestDirectory$ testQString toUpper

Runs the test function called toUpper with all available test data.

 /myTestDirectory$ testQString toUpper toInt:zero

Runs the toUpper test function with all available test data, and the toInt test function with the test data called zero (if the specified test data doesn't exist, the associated test will fail).

 /myTestDirectory$ testMyWidget -vs -eventdelay 500

Runs the testMyWidget function test, outputs every signal emission and waits 500 milliseconds after each simulated mouse/keyboard event.

Options

Logging Options

The following command line options determine how test results are reported:

  • -o filename,format
    Writes output to the specified file, in the specified format (one of txt, xml, lightxml, junitxml or tap). The special filename - may be used to log to standard output.
  • -o filename
    Writes output to the specified file.
  • -txt
    Outputs results in plain text.
  • -xml
    Outputs results as an XML document.
  • -lightxml
    Outputs results as a stream of XML tags.
  • -junitxml
    Outputs results as an JUnit XML document.
  • -csv
    Outputs results as comma-separated values (CSV). This mode is only suitable for benchmarks, since it suppresses normal pass/fail messages.
  • -teamcity
    Outputs results in TeamCity format.
  • -tap
    Outputs results in Test Anything Protocol (TAP) format.

The first version of the -o option may be repeated in order to log test results in multiple formats, but no more than one instance of this option can log test results to standard output.

If the first version of the -o option is used, neither the second version of the -o option nor the -txt, -xml, -lightxml, -teamcity, -junitxml or -tap options should be used.

If neither version of the -o option is used, test results will be logged to standard output. If no format option is used, test results will be logged in plain text.

Test Log Detail Options

The following command line options control how much detail is reported in test logs:

  • -silent
    Silent output; only shows fatal errors, test failures and minimal status messages.
  • -v1
    Verbose output; shows when each test function is entered. (This option only affects plain text output.)
  • -v2
    Extended verbose output; shows each QCOMPARE() and QVERIFY(). (This option affects all output formats and implies -v1 for plain text output.)
  • -vs
    Shows all signals that get emitted and the slot invocations resulting from those signals. (This option affects all output formats.)

Testing Options

The following command-line options influence how tests are run:

  • -functions
    Outputs all test functions available in the test, then quits.
  • -datatags
    Outputs all data tags available in the test. A global data tag is preceded by ' __global__ '.
  • -eventdelay ms
    If no delay is specified for keyboard or mouse simulation (QTest::keyClick(), QTest::mouseClick() etc.), the value from this parameter (in milliseconds) is substituted.
  • -keydelay ms
    Like -eventdelay, but only influences keyboard simulation and not mouse simulation.
  • -mousedelay ms
    Like -eventdelay, but only influences mouse simulation and not keyboard simulation.
  • -maxwarnings number
    Sets the maximum number of warnings to output. 0 for unlimited, defaults to 2000.
  • -nocrashhandler
    Disables the crash handler on Unix platforms. On Windows, it re-enables the Windows Error Reporting dialog, which is turned off by default. This is useful for debugging crashes.
  • -platform name
    This command line argument applies to all Qt applications, but might be especially useful in the context of auto-testing. By using the "offscreen" platform plugin (-platform offscreen) it's possible to have tests that use QWidget or QWindow run without showing anything on the screen. Currently the offscreen platform plugin is only fully supported on X11.

Benchmarking Options

The following command line options control benchmark testing:

  • -callgrind
    Uses Callgrind to time benchmarks (Linux only).
  • -tickcounter
    Uses CPU tick counters to time benchmarks.
  • -eventcounter
    Counts events received during benchmarks.
  • -minimumvalue n
    Sets the minimum acceptable measurement value.
  • -minimumtotal n
    Sets the minimum acceptable total for repeated executions of a test function.
  • -iterations n
    Sets the number of accumulation iterations.
  • -median n
    Sets the number of median iterations.
  • -vb
    Outputs verbose benchmarking information.

Miscellaneous Options

  • -help
    Outputs the possible command line arguments and gives some useful help.

Creating a Benchmark

To create a benchmark, follow the instructions for creating a test and then add a QBENCHMARK macro or QTest::setBenchmarkResult() to the test function that you want to benchmark. In the following code snippet, the macro is used:

 class MyFirstBenchmark: public QObject
 {
     Q_OBJECT
 private slots:
     void myFirstBenchmark()
     {
         QString string1;
         QString string2;
         QBENCHMARK {
             string1.localeAwareCompare(string2);
         }
     }
 };

A test function that measures performance should contain either a single QBENCHMARK macro or a single call to setBenchmarkResult(). Multiple occurrences make no sense, because only one performance result can be reported per test function, or per data tag in a data-driven setup.

Avoid changing the test code that forms (or influences) the body of a QBENCHMARK macro, or the test code that computes the value passed to setBenchmarkResult(). Differences in successive performance results should ideally be caused only by changes to the product you are testing. Changes to the test code can potentially result in misleading report of a change in performance. If you do need to change the test code, make that clear in the commit message.

In a performance test function, the QBENCHMARK or setBenchmarkResult() should be followed by a verification step using QCOMPARE(), QVERIFY(), and so on. You can then flag a performance result as invalid if another code path than the intended one was measured. A performance analysis tool can use this information to filter out invalid results. For example, an unexpected error condition will typically cause the program to bail out prematurely from the normal program execution, and thus falsely show a dramatic performance increase.

Selecting the Measurement Back-end

The code inside the QBENCHMARK macro will be measured, and possibly also repeated several times in order to get an accurate measurement. This depends on the selected measurement back-end. Several back-ends are available. They can be selected on the command line:

NameCommand-line ArgumentAvailability
Walltime(default)All platforms
CPU tick counter-tickcounterWindows, macOS, Linux, many UNIX-like systems.
Event Counter-eventcounterAll platforms
Valgrind Callgrind-callgrindLinux (if installed)
Linux Perf-perfLinux

In short, walltime is always available but requires many repetitions to get a useful result. Tick counters are usually available and can provide results with fewer repetitions, but can be susceptible to CPU frequency scaling issues. Valgrind provides exact results, but does not take I/O waits into account, and is only available on a limited number of platforms. Event counting is available on all platforms and it provides the number of events that were received by the event loop before they are sent to their corresponding targets (this might include non-Qt events).

The Linux Performance Monitoring solution is available only on Linux and provides many different counters, which can be selected by passing an additional option -perfcounter countername, such as -perfcounter cache-misses, -perfcounter branch-misses, or -perfcounter l1d-load-misses. The default counter is cpu-cycles. The full list of counters can be obtained by running any benchmark executable with the option -perfcounterlist.

  • Using the performance counter may require enabling access to non-privileged applications.
  • Devices that do not support high-resolution timers default to one-millisecond granularity.

See Writing a Benchmark in the Qt Test Tutorial for more benchmarking examples.

Using Global Test Data

You can define initTestCase_data() to set up a global test data table. Each test is run once for each row in the global test data table. When the test function itself is data-driven, it is run for each local data row, for each global data row. So, if there are g rows in the global data table and d rows in the test's own data-table, the number of runs of this test is g times d.

Global data is fetched from the table using the QFETCH_GLOBAL() macro.

The following are typical use cases for global test data:

  • Selecting among the available database backends in QSql tests to run every test against every database.
  • Doing all networking tests with and without SSL (HTTP versus HTTPS) and proxying.
  • Testing a timer with a high precision clock and with a coarse one.
  • Selecting whether a parser shall read from a QByteArray or from a QIODevice.

For example, to test each number provided by roundTripInt_data() with each locale provided by initTestCase_data():

 void TestQLocale::roundTripInt()
 {
     QFETCH_GLOBAL(QLocale, locale);
     QFETCH(int, number);
     bool ok;
     QCOMPARE(locale.toInt(locale.toString(number), &ok), number);
     QVERIFY(ok);
 }