QLockFile Class

The QLockFile class provides locking between processes using a file. More...

Header: #include <QLockFile>
CMake: find_package(Qt6 REQUIRED COMPONENTS Core)
target_link_libraries(mytarget PRIVATE Qt6::Core)
qmake: QT += core

Public Types

enum LockError { NoError, LockFailedError, PermissionError, UnknownError }

Public Functions

QLockFile(const QString &fileName)
~QLockFile()
LockError error() const
QString fileName() const
bool getLockInfo(qint64 *pid, QString *hostname, QString *appname) const
bool isLocked() const
bool lock()
bool removeStaleLockFile()
void setStaleLockTime(int staleLockTime)
void setStaleLockTime(std::chrono::milliseconds staleLockTime)
int staleLockTime() const
std::chrono::milliseconds staleLockTimeAsDuration() const
bool tryLock(int timeout)
bool tryLock(std::chrono::milliseconds timeout = std::chrono::milliseconds::zero())
void unlock()

Detailed Description

A lock file can be used to prevent multiple processes from accessing concurrently the same resource. For instance, a configuration file on disk, or a socket, a port, a region of shared memory...

Serialization is only guaranteed if all processes that access the shared resource use QLockFile, with the same file path.

QLockFile supports two use cases: to protect a resource for a short-term operation (e.g. verifying if a configuration file has changed before saving new settings), and for long-lived protection of a resource (e.g. a document opened by a user in an editor) for an indefinite amount of time.

When protecting for a short-term operation, it is acceptable to call lock() and wait until any running operation finishes. When protecting a resource over a long time, however, the application should always call setStaleLockTime(0ms) and then tryLock() with a short timeout, in order to warn the user that the resource is locked.

If the process holding the lock crashes, the lock file stays on disk and can prevent any other process from accessing the shared resource, ever. For this reason, QLockFile tries to detect such a "stale" lock file, based on the process ID written into the file. To cover the situation that the process ID got reused meanwhile, the current process name is compared to the name of the process that corresponds to the process ID from the lock file. If the process names differ, the lock file is considered stale. Additionally, the last modification time of the lock file (30s by default, for the use case of a short-lived operation) is taken into account. If the lock file is found to be stale, it will be deleted.

For the use case of protecting a resource over a long time, you should therefore call setStaleLockTime(0), and when tryLock() returns LockFailedError, inform the user that the document is locked, possibly using getLockInfo() for more details.

Note: On Windows, this class has problems detecting a stale lock if the machine's hostname contains characters outside the US-ASCII character set.

Member Type Documentation

enum QLockFile::LockError

This enum describes the result of the last call to lock() or tryLock().

ConstantValueDescription
QLockFile::NoError0The lock was acquired successfully.
QLockFile::LockFailedError1The lock could not be acquired because another process holds it.
QLockFile::PermissionError2The lock file could not be created, for lack of permissions in the parent directory.
QLockFile::UnknownError3Another error happened, for instance a full partition prevented writing out the lock file.

Member Function Documentation

QLockFile::QLockFile(const QString &fileName)

Constructs a new lock file object. The object is created in an unlocked state. When calling lock() or tryLock(), a lock file named fileName will be created, if it doesn't already exist.

See also lock() and unlock().

[noexcept] QLockFile::~QLockFile()

Destroys the lock file object. If the lock was acquired, this will release the lock, by deleting the lock file.

LockError QLockFile::error() const

Returns the lock file error status.

If tryLock() returns false, this function can be called to find out the reason why the locking failed.

QString QLockFile::fileName() const

Returns the file name of the lock file

bool QLockFile::getLockInfo(qint64 *pid, QString *hostname, QString *appname) const

Retrieves information about the current owner of the lock file.

If tryLock() returns false, and error() returns LockFailedError, this function can be called to find out more information about the existing lock file:

  • the PID of the application (returned in pid)
  • the hostname it's running on (useful in case of networked filesystems),
  • the name of the application which created it (returned in appname),

Note that tryLock() automatically deleted the file if there is no running application with this PID, so LockFailedError can only happen if there is an application with this PID (it could be unrelated though).

This can be used to inform users about the existing lock file and give them the choice to delete it. After removing the file using removeStaleLockFile(), the application can call tryLock() again.

This function returns true if the information could be successfully retrieved, false if the lock file doesn't exist or doesn't contain the expected data. This can happen if the lock file was deleted between the time where tryLock() failed and the call to this function. Simply call tryLock() again if this happens.

bool QLockFile::isLocked() const

Returns true if the lock was acquired by this QLockFile instance, otherwise returns false.

See also lock(), unlock(), and tryLock().

bool QLockFile::lock()

Creates the lock file.

If another process (or another thread) has created the lock file already, this function will block until that process (or thread) releases it.

Calling this function multiple times on the same lock from the same thread without unlocking first is not allowed. This function will dead-lock when the file is locked recursively.

Returns true if the lock was acquired, false if it could not be acquired due to an unrecoverable error, such as no permissions in the parent directory.

See also unlock() and tryLock().

bool QLockFile::removeStaleLockFile()

Attempts to forcefully remove an existing lock file.

Calling this is not recommended when protecting a short-lived operation: QLockFile already takes care of removing lock files after they are older than staleLockTime().

This method should only be called when protecting a resource for a long time, i.e. with staleLockTime(0), and after tryLock() returned LockFailedError, and the user agreed on removing the lock file.

Returns true on success, false if the lock file couldn't be removed. This happens on Windows, when the application owning the lock is still running.

void QLockFile::setStaleLockTime(int staleLockTime)

Sets staleLockTime to be the time in milliseconds after which a lock file is considered stale. The default value is 30000, i.e. 30 seconds. If your application typically keeps the file locked for more than 30 seconds (for instance while saving megabytes of data for 2 minutes), you should set a bigger value using setStaleLockTime().

The value of staleLockTime is used by lock() and tryLock() in order to determine when an existing lock file is considered stale, i.e. left over by a crashed process. This is useful for the case where the PID got reused meanwhile, so one way to detect a stale lock file is by the fact that it has been around for a long time.

This is an overloaded function, equivalent to calling:

 setStaleLockTime(std::chrono::milliseconds{staleLockTime});

See also staleLockTime().

[since 6.2] void QLockFile::setStaleLockTime(std::chrono::milliseconds staleLockTime)

Sets the interval after which a lock file is considered stale to staleLockTime. The default value is 30s.

If your application typically keeps the file locked for more than 30 seconds (for instance while saving megabytes of data for 2 minutes), you should set a bigger value using setStaleLockTime().

The value of staleLockTime() is used by lock() and tryLock() in order to determine when an existing lock file is considered stale, i.e. left over by a crashed process. This is useful for the case where the PID got reused meanwhile, so one way to detect a stale lock file is by the fact that it has been around for a long time.

This function was introduced in Qt 6.2.

See also staleLockTime().

int QLockFile::staleLockTime() const

Returns the time in milliseconds after which a lock file is considered stale.

See also setStaleLockTime().

[since 6.2] std::chrono::milliseconds QLockFile::staleLockTimeAsDuration() const

This is an overloaded function.

Returns a std::chrono::milliseconds object which denotes the time after which a lock file is considered stale.

This function was introduced in Qt 6.2.

See also setStaleLockTime().

bool QLockFile::tryLock(int timeout)

Attempts to create the lock file. This function returns true if the lock was obtained; otherwise it returns false. If another process (or another thread) has created the lock file already, this function will wait for at most timeout milliseconds for the lock file to become available.

Note: Passing a negative number as the timeout is equivalent to calling lock(), i.e. this function will wait forever until the lock file can be locked if timeout is negative.

If the lock was obtained, it must be released with unlock() before another process (or thread) can successfully lock it.

Calling this function multiple times on the same lock from the same thread without unlocking first is not allowed, this function will always return false when attempting to lock the file recursively.

See also lock() and unlock().

[since 6.2] bool QLockFile::tryLock(std::chrono::milliseconds timeout = std::chrono::milliseconds::zero())

This is an overloaded function.

Attempts to create the lock file. This function returns true if the lock was obtained; otherwise it returns false. If another process (or another thread) has created the lock file already, this function will wait for at most timeout for the lock file to become available.

If the lock was obtained, it must be released with unlock() before another process (or thread) can successfully lock it.

Calling this function multiple times on the same lock from the same thread without unlocking first is not allowed, this function will always return false when attempting to lock the file recursively.

This function was introduced in Qt 6.2.

See also lock() and unlock().

void QLockFile::unlock()

Releases the lock, by deleting the lock file.

Calling unlock() without locking the file first, does nothing.

See also lock() and tryLock().