gui, man: Update docs & translations
This commit is contained in:
Jakob Borg
parent
720e8dedbc
commit
4aaf8d4ceb
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Добави ново устройство",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Добавяне на устройства от списъка на запознаващото устройтво в нашият списък с устройства, за взаимно споделени папки.",
|
||||
"Add new folder?": "Добави нова папка?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Адрес",
|
||||
"Addresses": "Адреси",
|
||||
"Advanced": "Допълнителни",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Грешка при свързването",
|
||||
"Connection Type": "Вид връзка",
|
||||
"Connections": "Връзки",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Копиране от някъде другаде",
|
||||
"Copied from original": "Копиран от оригинала",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Всички правата запазени © 2014-2016 Сътрудници:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Грешка в откриването",
|
||||
"Do not restore": "Не възстановявай",
|
||||
"Do not restore all": "Не възстановявай всички",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Документация",
|
||||
"Download Rate": "Скорост на сваляне",
|
||||
"Downloaded": "Изтеглен",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Път до папката",
|
||||
"Folder Type": "Вид папка",
|
||||
"Folders": "Папки",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Потребителски интерфейс",
|
||||
"GUI Authentication Password": "Парола за интерфейса",
|
||||
"GUI Authentication User": "Потребителско име за интерфейса",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Периодичните сканирвания на определен интервал са активирани, а наблюденията за промени са деактивирани",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Периодичните сканирвания на определен интервал и наблюденията за промени са активирани",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Периодичните сканирвания са деактивирани и задаването на наблюдение за промени е неуспешно, ще опита всяка следваща минута:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Моля прочети бележките по обновяването преди да започнеш.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Моля задайте потребителско име и парола за потребителския интерфейс в секцията Настройки.",
|
||||
"Please wait": "Моля изчакай",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е по-горна директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Внимание, това е вътрешна папка на вече съществуваща папка \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е под-директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяш ново устройство помни, че твоето устройство също трябва да бъде добавено от другата страна.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Когато добавяш нов идентификатор на папка помни, че той се използва за свързване на папките на различни устройства. Главни/малки букви са от значение и трябва да са еднакви на всички устройства.",
|
||||
"Yes": "Да",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Afegir Dispositiu Remot.",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Afegir dispositius des-de l'introductor a la nostra llista de dispositius, per a tindre carpetes compartides mútuament",
|
||||
"Add new folder?": "Afegir nova carpeta?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Direcció",
|
||||
"Addresses": "Direccions",
|
||||
"Advanced": "Avançat",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Error de connexió",
|
||||
"Connection Type": "Tipus de connexió",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copiat de qualsevol lloc",
|
||||
"Copied from original": "Copiat de l'original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 els següents Col·laboradors:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Fallades al Descobriment",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentació",
|
||||
"Download Rate": "Velocitat de descàrrega",
|
||||
"Downloaded": "Descarregat",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Ruta de la carpeta",
|
||||
"Folder Type": "Tipus de carpeta",
|
||||
"Folders": "Carpetes",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "IGU (Interfície Gràfica d'Usuari)",
|
||||
"GUI Authentication Password": "Password d'autenticació de l'Interfície Gràfica d'Usuari (GUI)",
|
||||
"GUI Authentication User": "Autenticació de l'usuari de l'Interfície Gràfica d'Usuari (GUI)",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Per favor, consultar les notes de la versió abans de fer una actualització important.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Per favor, estableix un usuari i password per a l'Interfície Gràfica d'Usuari en el menú d'Adjustos.",
|
||||
"Please wait": "Per favor, espere",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Perill! Esta ruta és un directori pare d'una carpeta existent \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Perill! Esta ruta és un subdirectori d'una carpeta que ja existeix nomenada \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Perill! Esta ruta és un subdirectori de una carpeta existent \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Quant s'afig un nou dispositiu, hi ha que tindre en compte que aquest dispositiu deu ser afegit també en l'altre costat.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quant s'afig una nova carpeta, hi ha que tindre en compte que l'ID de la carpeta s'utilitza per a juntar les carpetes entre dispositius. Són sensibles a les majúscules i deuen coincidir exactament entre tots els dispositius.",
|
||||
"Yes": "Sí",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Přidat vzdálené zařízení",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Přidat zařízení ze zavaděče do našeho seznamu zařízení, pro vzájemně sdílené adresáře.",
|
||||
"Add new folder?": "Přidat nový adresář?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adresa",
|
||||
"Addresses": "Adresy",
|
||||
"Advanced": "Pokročilé",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Chyba připojení",
|
||||
"Connection Type": "Typ připojení",
|
||||
"Connections": "Připojení",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Zkopírováno odjinud",
|
||||
"Copied from original": "Zkopírováno z originálu",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 následující přispěvatelé:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Selhání při oznamování",
|
||||
"Do not restore": "Neobnovit",
|
||||
"Do not restore all": "Neobnovit vše",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentace",
|
||||
"Download Rate": "Rychlost stahování",
|
||||
"Downloaded": "Staženo",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Cesta k adresáři",
|
||||
"Folder Type": "Typ adresáře",
|
||||
"Folders": "Adresáře",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Přihlašovací heslo pro GUI",
|
||||
"GUI Authentication User": "Přihlašovací jméno pro GUI",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodické skenování podle zadaného intervalu; sledování změn vypnuto",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodické skenování podle zadaného intervalu; sledování změn zapnuto",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodické skenování podle zadaného intervalu; nastavení sledování změn selhalo, nový pokud každou 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Před spuštěním důležité aktualizace si nejdříve přečtěte poznámky k vydání nové verze.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Zadejte prosím přihlašovací jméno a heslo pro GUI v dialogu nastavení.",
|
||||
"Please wait": "Chvíli strpení",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varování, tato cesta je nadřazenou složkou existujícího adresáře \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Varování: tato cesta je podsložkou existujícího adresáře \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varování, tato cesta je podsložkou existujícího adresáře \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Při přidávání nového přístroje mějte na paměti, že je ho třeba také zadat na druhé straně.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Při přidávání nového adresáře mějte na paměti, že jeho ID je použito ke svázání adresářů napříč přístoji. Rozlišují se malá a velká písmena a musí přesně souhlasit mezi všemi přístroji.",
|
||||
"Yes": "Ano",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Tilføj fjernenhed",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
|
||||
"Add new folder?": "Tilføj ny mappe",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adresse",
|
||||
"Addresses": "Adresser",
|
||||
"Advanced": "Avanceret",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Tilslutnings fejl",
|
||||
"Connection Type": "Tilslutningstype",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Kopieret fra et andet sted",
|
||||
"Copied from original": "Kopieret fra originalen",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 de følgende bidragsydere:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Opdagelses Fejl ",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentation",
|
||||
"Download Rate": "Downloadhastighed",
|
||||
"Downloaded": "Downloadet",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Mappesti",
|
||||
"Folder Type": "Mappetype",
|
||||
"Folders": "Mapper",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI-kodeord",
|
||||
"GUI Authentication User": "GUI-brugernavn",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Tjek venligst udgivelsesnoterne før opgradering til en ny version.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Sæt vensligt en GUI bruger og kodeord i opsætningsdialogen.",
|
||||
"Please wait": "Vent venligst",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne sti er en rodmappe til den eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Advarsel, denne sti er en undermappe af en eksisterende mappe \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne sti er en undermappe af en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Når der tilføjes en ny enhed, vær da opmærksom på, at denne enhed også skal tilføjes på den anden side.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Når der tilføjes en ny enhed, vær da opmærksom på at samme ID bruges til at forbinde mapperne på de forskellige enheder. Der er forskel på store og små bogstaver, og ID skal være fuldstændig identisk på alle enheder.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Gerät hinzufügen",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Fügt Geräte vom Verteilergerät zu der eigenen Geräteliste hinzu, um gegenseitig geteilte Ordner zu ermöglichen.",
|
||||
"Add new folder?": "Neuen Ordner hinzufügen?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Zusätzlich wird das Scaninterval erhöht (um Faktor 60, also 1 Stunde als neuer Standard). Es kann auch manuell für jeden Ordner gesetzt werden, wenn Nein geklickt wird.",
|
||||
"Address": "Adresse",
|
||||
"Addresses": "Adressen",
|
||||
"Advanced": "Erweitert",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Verbindungsfehler",
|
||||
"Connection Type": "Verbindungstyp",
|
||||
"Connections": "Verbindungen",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Von anderer Quelle kopiert",
|
||||
"Copied from original": "Vom Original kopiert",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 der folgenden Unterstützer:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Gerätesuchfehler",
|
||||
"Do not restore": "Nicht wiederherstellen",
|
||||
"Do not restore all": "Nicht alle wiederherstellen",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentation",
|
||||
"Download Rate": "Download",
|
||||
"Downloaded": "Heruntergeladen",
|
||||
|
|
@ -94,7 +97,7 @@
|
|||
"Error": "Fehler",
|
||||
"External File Versioning": "Externe Dateiversionierung",
|
||||
"Failed Items": "Fehlgeschlagene Objekte",
|
||||
"Failed to load ignore patterns": "Failed to load ignore patterns",
|
||||
"Failed to load ignore patterns": "Fehler beim Laden der Ignoriermuster",
|
||||
"Failed to setup, retrying": "Fehler beim Installieren, erneut versuchen",
|
||||
"Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Ein Verbindungsfehler zu IPv6-Servern ist zu erwarten, wenn es keine IPv6-Konnektivität gibt.",
|
||||
"File Pull Order": "Dateiübertragungsreihenfolge",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Ordnerpfad",
|
||||
"Folder Type": "Ordnertyp",
|
||||
"Folders": "Ordner",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Passwort für Zugang zur Benutzeroberfläche",
|
||||
"GUI Authentication User": "Benutzername für Zugang zur Benutzeroberfläche",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodisches Scannen bei angegebenen Intervall und deaktivierter Überwachung von Änderungen",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodisches Scannen bei angegebenen Intervall und aktivierter Überwachung von Änderungen",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodisches Scannen bei angegebenen Intervall, fehlgeschlagene überprüfen auf Änderungen und erneuter versuch in 1 Min:",
|
||||
"Permissions": "Berechtigungen",
|
||||
"Please consult the release notes before performing a major upgrade.": "Bitte lesen Sie die Veröffentlichungshinweise bevor Sie eine Hauptversionsaktualisierung installieren.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Bitte lege einen Benutzer und ein Passwort für die Benutzeroberfläche in den Einstellungen fest.",
|
||||
"Please wait": "Bitte warten",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warnung, dieser Pfad ist ein übergeordnetes Verzeichnis eines existierenden Ordners \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warnung, dieser Pfad ist ein Unterordner des existierenden Ordners \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warnung, dieser Pfad ist ein Unterverzeichnis eines existierenden Ordners \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Gerätes, dass dieses Gerät auch auf den anderen Geräten hinzugefügt werden muss.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Beachte bitte beim Hinzufügen eines neuen Ordners, dass die Ordnerkennung dazu verwendet wird, Ordner zwischen Geräten zu verbinden. Die Kennung muss also auf allen Geräten gleich sein, die Groß- und Kleinschreibung muss dabei beachtet werden.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Προσθήκη Απομακρυσμένης Συσκευής",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Προσθήκη συσκευών από το Βασικό κόμβο στη λίστα συσκευών μας, για όσους κοινούς φακέλους υπάρχουν μεταξύ τους.",
|
||||
"Add new folder?": "Προσθήκη νέου φακέλου;",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Διεύθυνση",
|
||||
"Addresses": "Διευθύνσεις",
|
||||
"Advanced": "Προχωρημένες",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Σφάλμα σύνδεσης",
|
||||
"Connection Type": "Τύπος Σύνδεσης",
|
||||
"Connections": "Συνδέσεις",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Έχει αντιγραφεί από κάπου αλλού",
|
||||
"Copied from original": "Έχει αντιγραφεί από το πρωτότυπο",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 για τους παρακάτω συνεισφέροντες:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Αποτυχίες ανεύρεσης συσκευών",
|
||||
"Do not restore": "Να μη γίνει επαναφορά",
|
||||
"Do not restore all": "Να μη γίνει επαναφορά όλων",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Τεκμηρίωση",
|
||||
"Download Rate": "Ταχύτητα λήψης",
|
||||
"Downloaded": "Έχει ληφθεί",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Μονοπάτι φακέλου",
|
||||
"Folder Type": "Τύπος φακέλου",
|
||||
"Folders": "Φάκελοι",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Γραφικό περιβάλλον",
|
||||
"GUI Authentication Password": "Κωδικός για την πρόσβαση στη διεπαφή",
|
||||
"GUI Authentication User": "Χρηστώνυμο για την πρόσβαση στη διεπαφή",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Τακτική σάρωση ανά καθορισμένο διάστημα και απενεργοποίηση επιτήρησης αλλαγών",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Τακτική σάρωση ανά καθορισμένο διάστημα και ενεργοποίηση επιτήρησης αλλαγών",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Τακτική σάρωση ανά καθορισμένο διάστημα και αποτυχία ενεργοποίησης επιτήρησης αλλαγών. Γίνεται νέα προσπάθεια κάθε 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Παρακαλούμε, πριν από την εκτέλεση μιας σημαντικής αναβάθμισης, να συμβουλευτείς το σημείωμα που τη συνοδεύει. ",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Παρακαλώ όρισε στις ρυθμίσεις έναν χρήστη και έναν κωδικό πρόσβασης για τη διεπαφή.",
|
||||
"Please wait": "Παρακαλώ περιμένετε",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Προσοχή, αυτό το μονοπάτι είναι γονικός φάκελος ενός υπάρχοντος φακέλου \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Προσοχή, αυτό το μονοπάτι είναι υποφάκελος του υπάρχοντος φακέλου \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Προσοχή, αυτό το μονοπάτι είναι υποφάκελος ενός υπάρχοντος φακέλου \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Θυμήσου πως όταν προσθέτεις μια νέα συσκευή, ετούτη η συσκευή θα πρέπει να προστεθεί και στην άλλη πλευρά.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Όταν προσθέτεις έναν νέο φάκελο, θυμήσου πως η ταυτότητα ενός φακέλου χρησιμοποιείται για να να συσχετίσει φακέλους μεταξύ συσκευών. Η ταυτότητα του φακέλου θα πρέπει να είναι η ίδια σε όλες τις συσκευές και έχουν σημασία τα πεζά ή κεφαλαία γράμματα.",
|
||||
"Yes": "Ναι",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Add Remote Device",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
|
||||
"Add new folder?": "Add new folder?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Address",
|
||||
"Addresses": "Addresses",
|
||||
"Advanced": "Advanced",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Connection Error",
|
||||
"Connection Type": "Connection Type",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copied from elsewhere",
|
||||
"Copied from original": "Copied from original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Discovery Failures",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentation",
|
||||
"Download Rate": "Download Rate",
|
||||
"Downloaded": "Downloaded",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Folder Path",
|
||||
"Folder Type": "Folder Type",
|
||||
"Folders": "Folders",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI Authentication Password",
|
||||
"GUI Authentication User": "GUI Authentication User",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialogue.",
|
||||
"Please wait": "Please wait",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
|
||||
"Yes": "Yes",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Aldonu Foran Aparaton",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
|
||||
"Add new folder?": "Aldoni novan dosierujon?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adreso",
|
||||
"Addresses": "Adresoj",
|
||||
"Advanced": "Altnivela",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Eraro de Konekto",
|
||||
"Connection Type": "Tipo de Konekto",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Kopiita el aliloke",
|
||||
"Copied from original": "Kopiita el la originalo",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Kopirajto © 2014-2016 por la sekvantaj Kontribuantoj:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Malkovritaj Fiaskoj",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentado",
|
||||
"Download Rate": "Elŝutado rapida",
|
||||
"Downloaded": "Elŝutita",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Dosieruja Vojo",
|
||||
"Folder Type": "Dosieruja Tipo",
|
||||
"Folders": "Dosierujoj",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Grafika Interfaco",
|
||||
"GUI Authentication Password": "Pasvorta Aŭtentigo en Grafika Interfaco",
|
||||
"GUI Authentication User": "Uzanta Aŭtentigo en Grafika Interfaco",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Bonvolu konsulti la eldonitajn notojn antaŭ elfari ĉefan ĝisdatigon.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Bonvolu agordi GUI Authentication Uzanto kaj Pasvorto en la agordoj dialogo.",
|
||||
"Please wait": "Bonvolu atendi",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Averto, ĉi tiu vojo estas parenta dosierujo de ekzistanta dosierujo \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Averto, ĉi tiu vojo estas subdosierujo de ekzistanta dosierujo \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Averto, ĉi tiu vojo estas subdosierujo de ekzistanta dosierujo \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Dum la aldonado de nova aparato, memoru ke ĉi tiu aparato devas esti aldonita en la alia flanko ankaŭ.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Dum la aldonado de nova dosierujo, memoru ke la Dosieruja ID estas uzita por ligi la dosierujojn kune inter aparatoj. Ili estas literfakodistingaj kaj devas kongrui precize inter ĉiuj aparatoj.",
|
||||
"Yes": "Jes",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Añadir un dispositivo",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Añadir dispositivos desde el introductor a nuestra lista de dispositivos, para las carpetas compartidas mutuamente.",
|
||||
"Add new folder?": "¿Agregar una carpeta nueva?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Dirección",
|
||||
"Addresses": "Direcciones",
|
||||
"Advanced": "Avanzado",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Error de conexión",
|
||||
"Connection Type": "Tipo de conexión",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copiado de otro sitio",
|
||||
"Copied from original": "Copiado del original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes Colaboradores:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Fallos de Descubrimiento",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentación",
|
||||
"Download Rate": "Velocidad de descarga",
|
||||
"Downloaded": "Descargado",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Ruta de la carpeta",
|
||||
"Folder Type": "Tipo de carpeta",
|
||||
"Folders": "Carpetas",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Password de la Interfaz Gráfica de Usuario (GUI)",
|
||||
"GUI Authentication User": "Autentificación de usuario de la Interfaz Gráfica de Usuario (GUI)",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
|
||||
"Please wait": "Por favor, espere",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "'Peligro! Esta ruta es un subdirectorio de la carpeta ya existente \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Peligro! Esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Peligro, esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
|
||||
"Yes": "Si",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Añadir un dispositivo",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Añadir dispositivos desde el introductor a nuestra lista de dispositivos, para las carpetas compartidas mutuamente.",
|
||||
"Add new folder?": "¿Agregar una carpeta nueva?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Dirección",
|
||||
"Addresses": "Direcciones",
|
||||
"Advanced": "Avanzado",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Error de conexión",
|
||||
"Connection Type": "Tipo de conexión",
|
||||
"Connections": "Conexiones",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copiado de otro sitio",
|
||||
"Copied from original": "Copiado del original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes Colaboradores:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Fallos de Descubrimiento",
|
||||
"Do not restore": "No restaurar",
|
||||
"Do not restore all": "No restaurar todos",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentación",
|
||||
"Download Rate": "Velocidad de descarga",
|
||||
"Downloaded": "Descargado",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Ruta de la carpeta",
|
||||
"Folder Type": "Tipo de carpeta",
|
||||
"Folders": "Carpetas",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Password de la Interfaz Gráfica de Usuario (GUI)",
|
||||
"GUI Authentication User": "Autentificación de usuario de la Interfaz Gráfica de Usuario (GUI)",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
|
||||
"Please wait": "Por favor, espere",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "'Peligro! Esta ruta es un subdirectorio de la carpeta ya existente \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Peligro! Esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Peligro, esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
|
||||
"Yes": "Si",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Urrundikako tresna bat gehitu",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Gure tresna zerrendan tresnak gehitzea baimendu, partekatzeetan.",
|
||||
"Add new folder?": "Karpeta berria gehitu?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Helbidea",
|
||||
"Addresses": "Helbideak",
|
||||
"Advanced": "Aitzinatua",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Konexio hutsa",
|
||||
"Connection Type": "Konexio mota",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Beste nunbaitik kopiatua",
|
||||
"Copied from original": "Jatorrizkotik kopiatua",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright 2014-2016, ekarle hauk:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Agertze hutsegiteak",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentazioa",
|
||||
"Download Rate": "Deskargatzearen bit-tasa",
|
||||
"Downloaded": "Deskargatua",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Partekatzearen sustrai bidea",
|
||||
"Folder Type": "Partekatze mota",
|
||||
"Folders": "Partekatzeak",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Interfaze grafikoa",
|
||||
"GUI Authentication Password": "Interfaze grafiko pasahitza",
|
||||
"GUI Authentication User": "Interfaze grafiko erabiltzaile baimendua",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Aktualizatze garrantzitsu bat egin baino lehen, bertsioaren oharrak begira itzazu.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Konfigurazio leihoan asma itzazu erabiltzale izen bat eta pasahitz bat",
|
||||
"Please wait": "Pazientzia pixka bat, otoi",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da (adibidez, \"{{otherFolderLabel}}\" ({{otherFolder}}). ",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau \"{{otherFolder}}\" partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau \"{{otherFolderLabel}}\" ({{otherFolder}}) partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Tresna bat gehitzen duzularik, gogoan atxik ezazu zurea bestaldean gehitu behar dela ere",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Partekatze bat gehitzen delarik, gogoan atxik ezazu bere IDa erabilia dela errepertorioak lotzeko tresnen bitartez. ID-a hautskorra da eta partekatze hontan parte hartzen duten tresna guzietan berdina izan behar du.",
|
||||
"Yes": "Bai",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Ajouter un appareil",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Lui permettre d'ajouter et enlever des membres à toutes mes listes de membres de partages dont il fait partie (ceci permet de créer toutes les liaisons point à point possibles en complétant mes listes par les siennes, meilleur débit de réception par cumul des débits d'envoi, indépendance vis à vis de l'introducteur, etc).",
|
||||
"Add new folder?": "Ajouter ce partage ?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adresse",
|
||||
"Addresses": "Adresses",
|
||||
"Advanced": "Avancé",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Erreur de connexion",
|
||||
"Connection Type": "Type de connexion",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copié d'ailleurs",
|
||||
"Copied from original": "Copié depuis l'original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016, les contributeurs suivants:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Échecs de découverte",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentation",
|
||||
"Download Rate": "Débit de réception",
|
||||
"Downloaded": "Reçu",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Chemin racine du partage",
|
||||
"Folder Type": "Type de partage",
|
||||
"Folders": "Partages",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Interface graphique",
|
||||
"GUI Authentication Password": "Mot de passe d'authentification GUI",
|
||||
"GUI Authentication User": "Utilisateur autorisé GUI",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans les réglages.",
|
||||
"Please wait": "Merci de patienter",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolderLabel}}\" ({{otherFolder}})). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolder}}\". Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolderLabel}}\" ({{otherFolder}}). Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que son ID est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
|
||||
"Yes": "Oui",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Ajouter un appareil...",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "ATTENTION !!! Lui permettre d'ajouter et enlever des membres à toutes mes listes de membres des partages dont il fait (ou fera !) partie (ceci permet de créer automatiquement toutes les liaisons point à point possibles en complétant mes listes par les siennes, meilleur débit de réception par cumul des débits d'envoi, indépendance vis à vis de l'introducteur, etc).",
|
||||
"Add new folder?": "Ajouter ce partage ?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "De plus, l'intervalle de réanalyse complète sera augmenté (60min, cad la nouvelle valeur par défaut de 1h). Vous pouvez également la configurer manuellement plus tard, pour chaque dossier, après avoir choisi Non.",
|
||||
"Address": "Adresse",
|
||||
"Addresses": "Adresses",
|
||||
"Advanced": "Avancé",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Erreur de connexion",
|
||||
"Connection Type": "Type de connexion",
|
||||
"Connections": "Connexions",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "La surveillance permanente des changements est maintenant disponible dans Syncthing. Cela détecte les modifications sur le disque et lance une analyse uniquement sur les chemins modifiés. Les avantages sont que les changements sont propagés plus rapidement et moins d'analyses complètes sont nécessaires.",
|
||||
"Copied from elsewhere": "Copié d'ailleurs",
|
||||
"Copied from original": "Copié depuis l'original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016, les contributeurs sont:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Échecs de découverte",
|
||||
"Do not restore": "Ne pas restaurer",
|
||||
"Do not restore all": "Ne pas tout restaurer",
|
||||
"Do you want to enable watching for changes for all your folders?": "Voulez-vous activer la surveillance des changements de tous les partages ?",
|
||||
"Documentation": "Documentation",
|
||||
"Download Rate": "Débit de réception",
|
||||
"Downloaded": "Reçu",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Chemin racine du partage",
|
||||
"Folder Type": "Type de partage",
|
||||
"Folders": "Partages",
|
||||
"Full Rescan Interval (s)": "Intervalle de réanalyse complète (s)",
|
||||
"GUI": "Interface graphique",
|
||||
"GUI Authentication Password": "Mot de passe d'authentification GUI",
|
||||
"GUI Authentication User": "Utilisateur autorisé GUI",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Analyse périodique à intervalle défini et surveillance des changements désactivée.",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Analyse périodique à intervalle défini et surveillance des changements activée.",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Analyse périodique à intervalle défini et échec d'activation de la surveillance des changements. Nouvel essai toutes les 1mn :",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans la fenêtre de Configuration.",
|
||||
"Please wait": "Merci de patienter",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolderLabel}}\" ({{otherFolder}})). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolder}}\". Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolderLabel}}\" ({{otherFolder}}). Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Attention: si vous utilisez un système externe de surveillance tel que {{syncthingInotify}}, vous devez vous assurer qu'il est désactivé.",
|
||||
"Watch for Changes": "Surveille les changements",
|
||||
"Watching for Changes": "Surveiller les changements",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que son ID est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
|
||||
"Yes": "Oui",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Apparaat op Ofstân Taheakje",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Heakje apparaten fan de yntrodusearders ta oan ús apparatenlyst, foar mei-inoar dielde mappen.",
|
||||
"Add new folder?": "Nije map taheakje?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adres",
|
||||
"Addresses": "Adressen",
|
||||
"Advanced": "Avansearre",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Ferbiningsflater",
|
||||
"Connection Type": "Ferbiningstype",
|
||||
"Connections": "Ferbinings",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Oernommen fan earne oars",
|
||||
"Copied from original": "Oernommen fan orizjineel",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 de folgende bydragers:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Untdekkingsflaters",
|
||||
"Do not restore": "Net tebeksette",
|
||||
"Do not restore all": "Hielendal net tebeksette",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumintaasje",
|
||||
"Download Rate": "Downloadfluggens",
|
||||
"Downloaded": "Downloaded",
|
||||
|
|
@ -94,9 +97,9 @@
|
|||
"Error": "Flater",
|
||||
"External File Versioning": "Ekstern ferzjebehear foar triemen",
|
||||
"Failed Items": "Mislearre items",
|
||||
"Failed to load ignore patterns": "Failed to load ignore patterns",
|
||||
"Failed to load ignore patterns": "It laden fan negear-patroanen is mislearre",
|
||||
"Failed to setup, retrying": "Ynskeakeljen mislearre, wurd no opnij besocht",
|
||||
"Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": " Mislearjen fan it ferbinen mei IPv6-tsjinners wurd ferwachte as der gjin stipe foar IPv6-ferbinings is.",
|
||||
"Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Mislearjen fan it ferbinen mei IPv6-tsjinners wurd ferwachte as der gjin stipe foar IPv6-ferbinings is.",
|
||||
"File Pull Order": "Triemlûkfolchoarder",
|
||||
"File Versioning": "Triemferzjebehear",
|
||||
"File permission bits are ignored when looking for changes. Use on FAT file systems.": "Bits foar triemrjochten wurde negearre yn it sykjen foar feroarings. Brûk dit op FAT-triemsystemen.",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Map-paad",
|
||||
"Folder Type": "Maptype",
|
||||
"Folders": "Mappen",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Wachtwurd foar ferifikaasje yn GUI",
|
||||
"GUI Authentication User": "Brûkers-ID foar ferifikaasje yn GUI",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning op opjûn ynterfal en feroarings wurde net yn'e gaten hâlden.",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning op opjûn ynterfal en feroarings wurde yn'e gaten hâlden.",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning op opjûn ynterfal en it ynskeakeljen fan it yn'e gaten hâlden fan feroarings is mislearre, wurd eltse 1m opnij besocht:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Foardat jo in wichtige fernijing ynstallearre, graach earst de fernijingsoantekenings lêze.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Graach foar GUI-ferifikaasje in brûkers-ID en wachtwurd ynstelle yn it ynstellingsdialooch.",
|
||||
"Please wait": "In amerijke",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warskôging, dit paad is in boppelizzende triemtafel fan in besteande map \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warskôging, dit paad is in ûnderlizzende triemtafel fan in besteande map \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warskôging, dit paad is in ûnderlizzende triemtafel fan in besteande map \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Hâld by it taheakjen fan in nij apparaat yn de holle dat it apparaat oan de oare kant ek taheakke wurde moat. ",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Hâld by it taheakjen fan in nije map yn de holle dat de map-ID brûkt wurd om de mappen tusken apparaten mei-inoar te ferbinen. Se binne haadlettergefoelich en moatte oer alle apparaten eksakt oerienkomme.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Távoli eszköz hozzáadása",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Eszközök hozzáadása a bevezetőről az eszköz listához, a közösen megosztott mappákhoz.",
|
||||
"Add new folder?": "Hozzáadható az új mappa?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Ezzel együtt a teljes átnézési intervallum jóval meg fog nőni (60-szoros értékre, vagyis 1 óra az új alapértelmezett érték). A „Nem” kiválasztásával később kézzel is módosítható ez az érték minden egyes mappára külön-külön.",
|
||||
"Address": "Cím",
|
||||
"Addresses": "Címek",
|
||||
"Advanced": "Haladó",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Kapcsolódási hiba",
|
||||
"Connection Type": "Kapcsolattípus",
|
||||
"Connections": "Kapcsolatok",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Az állandó változásfigyelés immár elérhető a Syncthingben, amellyel észlelhetőek a lemezen történt módosulások és így csak a szükséges útvonalakon történik átnézés. Az funkció előnye, hogy a változások gyorsabban terjednek és kevesebb teljes átnézésre lesz szükség.",
|
||||
"Copied from elsewhere": "Máshonnan másolva",
|
||||
"Copied from original": "Eredetiről másolva",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Szerzői jog © 2014-2016 az alábbi közreműködők:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Felfedezési hibák",
|
||||
"Do not restore": "Ne legyen visszaállítva",
|
||||
"Do not restore all": "Semmit se állítson vissza",
|
||||
"Do you want to enable watching for changes for all your folders?": "Minden mappára bekapcsolható a változásfigyelés?",
|
||||
"Documentation": "Dokumentáció",
|
||||
"Download Rate": "Letöltési sebesség",
|
||||
"Downloaded": "Letöltve",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Mappa elérési útvonala",
|
||||
"Folder Type": "Mappatípus",
|
||||
"Folders": "Mappák",
|
||||
"Full Rescan Interval (s)": "Teljes átnézési intervallum (mp)",
|
||||
"GUI": "Grafikus felület",
|
||||
"GUI Authentication Password": "Grafikus felület jelszava",
|
||||
"GUI Authentication User": "Grafikus felület felhasználói neve ",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodikus átnézés a megadott időközönként és a változások keresése letiltva",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodikus átnézés a megadott időközönként és a változások keresése engedélyezve",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodikus átnézés a megadott időközönként és a változások keresésének beállítása sikertelen, 1 percenként újrapróbálkozás:",
|
||||
"Permissions": "Jogosultságok",
|
||||
"Please consult the release notes before performing a major upgrade.": "Nagyobb frissítés előtt ellenőrizni kell a kiadási megjegyzéseket.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Be kell állítani a grafikus felület felhasználónevét és jelszavát a Beállítások párbeszédablakban.",
|
||||
"Please wait": "Türelem",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Figyelem, ez az útvonal a meglévő „{{otherFolderLabel}}” ({{otherFolder}}) mappa szülőmappája.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Figyelem, ez az útvonal a meglévő „{{otherFolder}}” mappa almappája.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Figyelem, ez az útvonal a meglévő „{{otherFolderLabel}}” ({{otherFolder}}) mappa almappája.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Figyelem: Ha eddig külső megfigyelő volt erre a célra alkalmazva, mint pl. a(z) {{syncthingInotify}}, akkor előbb meg kell győződni arról, hogy az ki lett kapcsolva.",
|
||||
"Watch for Changes": "Változásfigyelés",
|
||||
"Watching for Changes": "Változások figyelése",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Új eszköz hozzáadásakor nem szabad elfeledkezni arról, hogy a másik oldalon ezt az eszközt is hozzá kell adni.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Új eszköz hozzáadásakor észben kell tartani, hogy a mappaazonosító arra való, hogy összekösse a mappákat az eszközökön. Az azonosító kisbetű-nagybetű érzékeny és pontosan egyeznie kell az eszközökön.",
|
||||
"Yes": "Igen",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Aggiungi Dispositivo Remoto",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Aggiungi dispositivi dall'introduttore al nostro elenco, per le cartelle condivise reciprocamente.",
|
||||
"Add new folder?": "Aggiungere una nuova cartella?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Indirizzo",
|
||||
"Addresses": "Indirizzi",
|
||||
"Advanced": "Avanzato",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Errore di Connessione",
|
||||
"Connection Type": "Tipo di Connessione",
|
||||
"Connections": "Connessioni",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copiato da qualche altra parte",
|
||||
"Copied from original": "Copiato dall'originale",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 i seguenti Collaboratori:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Individuazione Fallita",
|
||||
"Do not restore": "Non ripristinare",
|
||||
"Do not restore all": "Non ripristinare tutto",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentazione",
|
||||
"Download Rate": "Velocità Download",
|
||||
"Downloaded": "Scaricato",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Percorso Cartella",
|
||||
"Folder Type": "Tipo di Cartella",
|
||||
"Folders": "Cartelle",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Interfaccia Grafica Utente",
|
||||
"GUI Authentication Password": "Password dell'Interfaccia Grafica",
|
||||
"GUI Authentication User": "Utente dell'Interfaccia Grafica",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Scansione periodica a intervalli determinati e verifica cambiamenti disabilitata",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Scansione periodica a intervalli determinati e verifica cambiamenti abilitata",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Scansione periodica a intervalli determinati e configurazione fallita della verifica cambiamenti, nuovo tentativo ogni 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Si prega di consultare le note di rilascio prima di eseguire un aggiornamento principale.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Per favore impostare Utente e Password dell'Interfaccia Grafica nelle Impostazioni.",
|
||||
"Please wait": "Attendere prego",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attenzione, questo percorso è una cartella superiore di una cartella esistente \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Attenzione, questo percorso è una sottocartella di una cartella esistente \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attenzione, questo percorso è una sottocartella di una cartella esistente \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Quando si aggiunge un nuovo dispositivo, tenere presente che il dispositivo deve essere aggiunto anche dall'altra parte.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando aggiungi una nuova cartella, ricordati che gli ID vengono utilizzati per collegare le cartelle nei dispositivi. Distinguono maiuscole e minuscole e devono corrispondere esattamente su tutti i dispositivi.",
|
||||
"Yes": "Sì",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "接続先デバイスを追加",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "紹介者デバイスから紹介されたデバイスは、相互に共有しているフォルダーがある場合、このデバイス上にも追加されます。",
|
||||
"Add new folder?": "新しいフォルダーとして追加しますか？",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "アドレス",
|
||||
"Addresses": "アドレス",
|
||||
"Advanced": "高度な設定",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "接続エラー",
|
||||
"Connection Type": "接続種別",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "別ファイルからコピー済",
|
||||
"Copied from original": "元ファイルからコピー済",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "探索サーバーへの接続失敗",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "マニュアル",
|
||||
"Download Rate": "ダウンロード速度",
|
||||
"Downloaded": "ダウンロード済",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "フォルダーパス",
|
||||
"Folder Type": "フォルダーの種類",
|
||||
"Folders": "フォルダー",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI認証パスワード",
|
||||
"GUI Authentication User": "GUI認証ユーザー名",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "メジャーアップグレードを行う前にリリースノートを参照してください。",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "設定ダイアログから、GUI認証ユーザー名とパスワードを設定してください。",
|
||||
"Please wait": "お待ちください",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolderLabel}}」 ({{otherFolder}}) の親ディレクトリです。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolder}}」のサブディレクトリです。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolderLabel}}」 ({{otherFolder}}) のサブディレクトリです。",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "新しいデバイスを追加する際は、相手側デバイスにもこのデバイスを追加してください。",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "新しいフォルダーを追加する際、フォルダーIDはデバイス間でフォルダーの対応づけに使われることに注意してください。フォルダーIDは大文字と小文字が区別され、共有するすべてのデバイスの間で完全に一致しなくてはなりません。",
|
||||
"Yes": "はい",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "다른 기기 추가",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "상호 공유 폴더에 대해 유도자의 장치를 장치 목록에 추가합니다.",
|
||||
"Add new folder?": "새로운 폴더를 추가하시겠습니까?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "주소",
|
||||
"Addresses": "주소",
|
||||
"Advanced": "고급",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "연결 에러",
|
||||
"Connection Type": "연결 종류",
|
||||
"Connections": "연결",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "다른 곳에서 복사됨",
|
||||
"Copied from original": "원본에서 복사됨",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "탐색 실패",
|
||||
"Do not restore": "복구 하지 않기",
|
||||
"Do not restore all": "모두 복구 하지 않기",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "문서",
|
||||
"Download Rate": "다운로드 속도",
|
||||
"Downloaded": "다운로드됨",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "폴더 경로",
|
||||
"Folder Type": "폴더 유형",
|
||||
"Folders": "폴더",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI 인증 비밀번호",
|
||||
"GUI Authentication User": "GUI 인증 사용자",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "메이저 업데이트를 하기 전에 먼저 릴리즈 노트를 살펴보세요.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "설정에서 GUI 인증용 User와 암호를 입력해주세요.",
|
||||
"Please wait": "기다려 주십시오",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "경고, 이 경로는 현재 존재하는 폴더 \"{{otherFolderLabel}}\" ({{otherFolder}}) 의 상위 폴더 입니다.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "경고, 이 경로는 현재 존재하는 폴더 \"{{otherFolder}}\" 의 하위 폴더 입니다.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "경고, 이 경로는 현재 존재하는 폴더 \"{{otherFolderLabel}}\" ({{otherFolder}}) 의 하위 폴더 입니다.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "새 장치를 추가할 시 추가한 기기 쪽에서도 이 장치를 추가해야 합니다.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "새 폴더를 추가할 시 폴더 ID는 장치간에 폴더를 묶을 때 사용됩니다. 대소문자를 구분하며 모든 장치에서 같은 ID를 사용해야 합니다.",
|
||||
"Yes": "예",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Pridėti nuotolinį įrenginį",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Pridėti įrenginius iš supažindintojo į mūsų įrenginių sąrašą, siekiant abipusiškai bendrinti aplankus.",
|
||||
"Add new folder?": "Pridėti naują aplanką?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Pilnas nuskaitymo iš naujo intervalas bus papildomai padidintas (60 kartų, t.y. nauja numatytoji 1 val. reikšmė). Taip pat vėliau, pasirinkę Ne, galite jį konfigūruoti rankiniu būdu kiekvienam atskiram aplankui.",
|
||||
"Address": "Adresas",
|
||||
"Addresses": "Adresai",
|
||||
"Advanced": "Išplėstiniai",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Susijungimo klaida",
|
||||
"Connection Type": "Ryšio tipas",
|
||||
"Connections": "Ryšiai",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Pastoviai stebėti pakeitimus dabar galima Syncthing viduje. Tai aptiks pakeitimus jūsų diske ir paleis nuskaitymą tik modifikuotuose keliuose. Pranašumas yra tas, kad pakeitimai sklis greičiau ir reikės mažiau pilnų nuskaitymų.",
|
||||
"Copied from elsewhere": "Nukopijuota iš kitur",
|
||||
"Copied from original": "Nukopijuota iš originalo",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Autorių teisės © 2014-2016 šių bendraautorių:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Matomumo nesėkmės",
|
||||
"Do not restore": "Neatkurti",
|
||||
"Do not restore all": "Neatkurti visus",
|
||||
"Do you want to enable watching for changes for all your folders?": "Ar norite įjungti pakeitimų stebėjimą visiems savo aplankams?",
|
||||
"Documentation": "Aprašymas",
|
||||
"Download Rate": "Parsisiuntimo greitis",
|
||||
"Downloaded": "Parsisiųstas",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Kelias iki aplanko",
|
||||
"Folder Type": "Aplanko tipas",
|
||||
"Folders": "Aplankai",
|
||||
"Full Rescan Interval (s)": "Pilno nuskaitymo iš naujo intervalas (s)",
|
||||
"GUI": "Valdymo skydelis",
|
||||
"GUI Authentication Password": "Valdymo skydelio slaptažodis",
|
||||
"GUI Authentication User": "Valdymo skydelio vartotojo vardas",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodinis nuskaitymas nurodytu intervalu ir išjungtas pakeitimų stebėjimas",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodinis nuskaitymas nurodytu intervalu ir įjungtas pakeitimų stebėjimas",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodinis nuskaitymas nurodytu intervalu ir nepavykęs nustatyti pakeitimų stebėjimas, bandoma iš naujo kas 1 min.:",
|
||||
"Permissions": "Leidimai",
|
||||
"Please consult the release notes before performing a major upgrade.": "Peržvelkite laidos informaciją prieš atlikdami stambų atnaujinimą.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Prašome nustatymų dialoge nustatyti valdymo skydelio vartotojo vardą ir slaptažodį.",
|
||||
"Please wait": "Prašome palaukti",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Įspėjimas, šis kelias yra esamo aplanko \"{{otherFolderLabel}}\" ({{otherFolder}}) virškatalogis.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Įspėjimas, šis kelias yra esamo aplanko \"{{otherFolder}}\" pakatalogis.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Įspėjimas, šis kelias yra esamo aplanko \"{{otherFolderLabel}}\" ({{otherFolder}}) pakatalogis.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Įspėjimas: Jeigu naudojate išorinį stebėtoją, tokį kaip {{syncthingInotify}}, tuomet turite įsitikinti, kad jis yra išjungtas.",
|
||||
"Watch for Changes": "Stebėti pakeitimus",
|
||||
"Watching for Changes": "Stebimi pakeitimai",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Pridėdami įrenginį, turėkite omeny, kad šis įrenginys taip pat turi būti pridėtas kitoje pusėje.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Kai įvedate naują aplanką neužmirškite, kad jis bus naudojamas visuose įrenginiuose. Svarbu visur įvesti visiškai tokį pat aplanko vardą neužmirštant apie didžiąsias ir mažąsias raides.",
|
||||
"Yes": "Taip",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Legg til ekstern enhet",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Legg til enheter fra introdusøren til vår enhetsliste, for innbyrdes delte mapper.",
|
||||
"Add new folder?": "Legg til ny mappe?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adresse",
|
||||
"Addresses": "Adresser",
|
||||
"Advanced": "Avansert",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Tilkoblingsfeil",
|
||||
"Connection Type": "Tilkoblingstype",
|
||||
"Connections": "Tilkoblinger",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Kopiert fra et annet sted",
|
||||
"Copied from original": "Kopiert fra original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Opphavsrett © 2014-2016 for følgende bidragsytere:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Oppslagsfeil",
|
||||
"Do not restore": "Ikke gjenopprett",
|
||||
"Do not restore all": "Ikke gjenopprett alle",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentasjon",
|
||||
"Download Rate": "Nedlastingsrate",
|
||||
"Downloaded": "Lastet ned",
|
||||
|
|
@ -86,7 +89,7 @@
|
|||
"Editing {%path%}.": "Redigerer {{path}}.",
|
||||
"Enable NAT traversal": "Slå på NAT-traversering",
|
||||
"Enable Relaying": "Aktiver reléforsendelse",
|
||||
"Enabled": "Enabled",
|
||||
"Enabled": "Påskrudd",
|
||||
"Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Skriv inn et ikke-negativt nummer (f.eks. \"2.35\") og velg en enhet. Prosenter er deler av total diskstørrelse.",
|
||||
"Enter a non-privileged port number (1024 - 65535).": "Skriv inn et ikke-priviligert portnummer (1024-65535).",
|
||||
"Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Skriv inn kommaseparerte (\"tcp://ip:port\", \"tcp://host:port\") adresser, eller ordet \"dynamic\" for å gjøre automatisk oppslag i adressen.",
|
||||
|
|
@ -94,8 +97,8 @@
|
|||
"Error": "Feilmelding",
|
||||
"External File Versioning": "Ekstern versjonskontroll",
|
||||
"Failed Items": "Elementsynkronisering som har mislyktes",
|
||||
"Failed to load ignore patterns": "Failed to load ignore patterns",
|
||||
"Failed to setup, retrying": "Failed to setup, retrying",
|
||||
"Failed to load ignore patterns": "Klarte ikke å ignorere mønster",
|
||||
"Failed to setup, retrying": "Klarte ikke å utføre oppsett, prøver igjen",
|
||||
"Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Å ikke klare å koble til IPv6-tjenere er forventet hvis det ikke er noen IPv6-tilknytning.",
|
||||
"File Pull Order": "Filenes henterekkefølge",
|
||||
"File Versioning": "Versjonskontroll",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Mappeplassering",
|
||||
"Folder Type": "Mappetype",
|
||||
"Folders": "Mapper",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "grafisk brukergrensesnitt",
|
||||
"GUI Authentication Password": "Passord for GUI-autenisering",
|
||||
"GUI Authentication User": "Bruker for GUI-autenisering",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Tilganger",
|
||||
"Please consult the release notes before performing a major upgrade.": "Sjekk utgivelsesnotatene før en storoppgradering utføres.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Vennligst angi bruker og passord for GUI-autentisering i innstillingsvinduet.",
|
||||
"Please wait": "Vent",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne stien er en foreldremappe for en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Advarsel, denne stien er en undermappe i en eksisterende mappe \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne stien er en undermappe for en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Hold oppsyn med endringer",
|
||||
"Watching for Changes": "Holder oppsyn med endringer",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Når du legger til en ny enhet, husk at enheten må legges til på andre siden også.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Når en ny mappe blir lagt til, husk at Mappe-ID blir brukt til å binde sammen mapper mellom enheter. Det er forskjell på store og små bokstaver, så IDene må være identiske på alle enhetene.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Extern apparaat toevoegen",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Voeg apparaten van het introductieapparaat toe aan de lijst met apparaten voor gemeenschappelijk gedeelde mappen.",
|
||||
"Add new folder?": "Nieuwe map toevoegen?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adres",
|
||||
"Addresses": "Adressen",
|
||||
"Advanced": "Geavanceerd",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Verbindingsfout",
|
||||
"Connection Type": "Soort verbinding",
|
||||
"Connections": "Verbindingen",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Gekopieerd vanaf elders",
|
||||
"Copied from original": "Gekopieerd van het origineel",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Auteursrecht © 2014-2016 voor de volgende bijdragers:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Ontdekkingsproblemen",
|
||||
"Do not restore": "Niet herstellen",
|
||||
"Do not restore all": "Niet alles herstellen",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentatie",
|
||||
"Download Rate": "Downloadsnelheid",
|
||||
"Downloaded": "Gedownload",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Maplocatie",
|
||||
"Folder Type": "Soort map",
|
||||
"Folders": "Mappen",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI-wachtwoord",
|
||||
"GUI Authentication User": "GUI-gebruikersnaam",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodieke interval-scans maar nog niet op de hoogte van updates",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodieke interval-scans en gelukkig synchroon lopende updates!",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodieke interval-scans & helaas falende synchronisatieupdating",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Lees eerst de release notes voordat u een grote update uitvoert.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Stel een gebruikersnaam en wachtwoord in bij 'Instellingen'.",
|
||||
"Please wait": "Even geduld",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Waarschuwing, dit pad is een bovenliggende map van een bestaande map \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Let op, dit bestandspad is een submap van een bestaande map \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Waarschuwing, dit pad is een onderliggende map van een bestaande map \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Wanneer een nieuw toestel wordt toegevoegd, houd er dan rekening mee dat dit toestel ook aan de andere kant moet worden toegevoegd.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Houd er bij het toevoegen van nieuwe mappen rekening mee dat het map-ID gebruikt wordt om mappen tussen apparaten te verbinden. Dit ID is hoofdlettergevoelig en moet identiek zijn op andere apparaten.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Dodaj urządzenie zdalne",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Dodaj urządzenia od wprowadzającego do tej maszyny alby obustronnie dzielić katalogi.",
|
||||
"Add new folder?": "Dodać nowy folder?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adres",
|
||||
"Addresses": "Adresy",
|
||||
"Advanced": "Zaawansowane",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Błąd połączenia",
|
||||
"Connection Type": "Rodzaj połączenia",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Skopiowane z innego miejsca ",
|
||||
"Copied from original": "Skopiowane z oryginału",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016: ",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Błędy odnajdowania",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentacja",
|
||||
"Download Rate": "Prędkość pobierania",
|
||||
"Downloaded": "Pobrane",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Ścieżka folderu",
|
||||
"Folder Type": "Rodzaj folderu",
|
||||
"Folders": "Foldery",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Hasło",
|
||||
"GUI Authentication User": "Użytkownik",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Zaleca się przeanalizowanie \"release notes\" przed przeprowadzeniem znaczącej aktualizacji.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Ustaw proszę użytkownika i hasło dostępowe do GUI w Ustawieniach",
|
||||
"Please wait": "Proszę czekać",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Uwaga, ten folder jest nadfolderem istniejącego folderu \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Uwaga, ta ścieżka to podkatalog istniejącego folderu \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Uwaga, ten folder jest podfolderem istniejącego folderu \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Gdy dodajesz nowe urządzenie, pamiętaj że urządzenie musi zostać dodane także po drugiej stronie.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Przy dodawaniu nowego folderu, pamiętaj, że ID użyte jest do łączenia folderów pomiędzy urządzeniami. Wielkość liter ciągu ma znaczenie musi zgadzać się na wszystkich urządzeniach.",
|
||||
"Yes": "Tak",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Adicionar dispositivo remoto",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Adicionar dispositivos do introdutor à sua lista de dispositivos para pastas compartilhadas mutualmente.",
|
||||
"Add new folder?": "Adicionar nova pasta?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Endereço",
|
||||
"Addresses": "Endereços",
|
||||
"Advanced": "Avançado",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Erro de conexão",
|
||||
"Connection Type": "Tipo da conexão",
|
||||
"Connections": "Conexões",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Copiado de outro lugar",
|
||||
"Copied from original": "Copiado do original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Direitos reservados © 2014-2016 aos seguintes colaboradores:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Falhas na descoberta",
|
||||
"Do not restore": "Não restaurar",
|
||||
"Do not restore all": "Não restaurar nenhum",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Documentação",
|
||||
"Download Rate": "Velocidade de recepção",
|
||||
"Downloaded": "Recebido",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Caminho da pasta",
|
||||
"Folder Type": "Tipo da pasta",
|
||||
"Folders": "Pastas",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Interface gráfica",
|
||||
"GUI Authentication Password": "Senha para acesso à interface",
|
||||
"GUI Authentication User": "Nome de usuário para acesso à interface",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Verificação periódica habilitada no intervalo escolhido. Verificação automática de mudanças desabilitada",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Verificação periódica habilitada no intervalo escolhido. Verificação automática de mudanças habilitada",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Verificação periódica habilitada no intervalo escolhido. Não foi possível configurar a verificação automática de mudanças, tentando novamente a cada 1 minuto:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Por favor, consulte as notas de lançamento antes de atualizar para uma versão \"major\".",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um nome de usuário e senha para acesso à interface web, nas configurações.",
|
||||
"Please wait": "Aguarde",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Aviso: este caminho é o diretório pai da pasta \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Atenção, este caminho é um subdiretório de uma pasta já existente: \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Aviso: este caminho é um subdiretório da pasta \"{{otherFolderLabel}}\" ({{otherFolder}})",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Quando estiver adicionando um dispositivo, lembre-se de que este dispositivo deve ser adicionado do outro lado também.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar pastas entre dispositivos. Ele é sensível às diferenças entre maiúsculas e minúsculas e deve ser o mesmo em todos os dispositivos.",
|
||||
"Yes": "Sim",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Adicionar dispositivo remoto",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Adicione dispositivos do apresentador à nossa lista de dispositivos para ter pastas mutuamente partilhadas.",
|
||||
"Add new folder?": "Adicionar nova pasta?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Para além disso o intervalo entre verificações completas irá ser aumentado (vezes 60, ou seja, um novo valor predefinido de 1h). Também o pode configurar manualmente para cada pasta, posteriormente, depois de seleccionar Não.",
|
||||
"Address": "Endereço",
|
||||
"Addresses": "Endereços",
|
||||
"Advanced": "Avançadas",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Erro de ligação",
|
||||
"Connection Type": "Tipo de ligação",
|
||||
"Connections": "Ligações",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "A vigilância de alterações contínua está agora disponível dentro do Syncthing. Este sistema irá detectar alterações no disco e efectuar uma verificação apenas nas pastas modificadas. Os benefícios são que as alterações são propagadas mais depressa e são necessárias menos verificações completas.",
|
||||
"Copied from elsewhere": "Copiado doutro sítio",
|
||||
"Copied from original": "Copiado do original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 os seguintes contribuidores:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Falhas da pesquisa",
|
||||
"Do not restore": "Não restaurar",
|
||||
"Do not restore all": "Não restaurar todos",
|
||||
"Do you want to enable watching for changes for all your folders?": "Quer activar a vigilância de alterações para todas as suas pastas?",
|
||||
"Documentation": "Documentação",
|
||||
"Download Rate": "Velocidade de recepção",
|
||||
"Downloaded": "Recebido",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Caminho da pasta",
|
||||
"Folder Type": "Tipo de pasta",
|
||||
"Folders": "Pastas",
|
||||
"Full Rescan Interval (s)": "Intervalo entre verificações completas (s)",
|
||||
"GUI": "Interface gráfica",
|
||||
"GUI Authentication Password": "Senha da autenticação na interface gráfica",
|
||||
"GUI Authentication User": "Utilizador da autenticação na interface gráfica",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Verificação periódica no intervalo dado e desactivada a vigilância de alterações",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Verificação periódica no intervalo dado e activada a vigilância de alterações",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Verificação periódica no intervalo dado e falha ao preparar a vigilância de alterações, tentando novamente a cada minuto:",
|
||||
"Permissions": "Permissões",
|
||||
"Please consult the release notes before performing a major upgrade.": "Consulte as notas de lançamento antes de fazer uma actualização importante.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um utilizador e senha de autenticação para a interface gráfica, nas configurações.",
|
||||
"Please wait": "Aguarde",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Aviso: Este caminho é uma pasta mãe duma pasta \"{{otherFolderLabel}}\" ({{otherFolder}}) já existente.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Aviso: Este caminho é uma subpasta da pasta \"{{otherFolder}}\" já existente.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Aviso: Este caminho é uma subpasta da pasta \"{{otherFolderLabel}}\" ({{otherFolder}}) já existente.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Aviso: Se estiver a usar um verificador externo, tal como o {{syncthingInotify}}, deve certificar-se que está desactivado.",
|
||||
"Watch for Changes": "Vigiar alterações",
|
||||
"Watching for Changes": "Vigilância de alterações",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Quando adicionar um novo dispositivo, lembre-se que este dispositivo tem que ser adicionado do outro lado também.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar as pastas entre dispositivos. É sensível às diferenças entre maiúsculas e minúsculas e tem que ter uma correspondência perfeita entre todos os dispositivos.",
|
||||
"Yes": "Sim",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Добавить удалённое устройство",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
|
||||
"Add new folder?": "Добавить новую папку?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Адрес",
|
||||
"Addresses": "Адреса",
|
||||
"Advanced": "Дополнительно",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Ошибка подключения",
|
||||
"Connection Type": "Тип соединения",
|
||||
"Connections": "Подключения",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Скопировано из другого места",
|
||||
"Copied from original": "Скопировано с оригинала",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Авторские права © 2014–2016 принадлежат:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Ошибки обнаружения",
|
||||
"Do not restore": "Не восстанавливать",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Документация",
|
||||
"Download Rate": "Скорость загрузки",
|
||||
"Downloaded": "Загружено",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Путь к папке",
|
||||
"Folder Type": "Тип папки",
|
||||
"Folders": "Папки",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Интерфейс",
|
||||
"GUI Authentication Password": "Пароль для доступа к панели управления",
|
||||
"GUI Authentication User": "Имя пользователя для доступа к панели управления",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Перед проведением обновления основной версии ознакомтесь, пожалуйста, с Замечаниями к версии",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Установите имя пользователя и пароль для интерфейса в настройках",
|
||||
"Please wait": "Пожалуйста, подождите",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Внимание! Этот путь — родительская директория уже существующей папки «{{otherFolderLabel}}» ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Осторожно, этот путь является подкаталогом существующей папки «{{otherFolder}}».",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Внимание! Этот путь — поддиректория уже существующей папки «{{otherFolderLabel}}» ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Когда добавляете устройство, помните о том, что это же устройство должно быть добавлено и другой стороной.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Когда добавляете новую папку, помните, что ID папок используются для того, чтобы связывать папки между всеми устройствами. Они чувствительны к регистру и должны совпадать на всех используемых устройствах.",
|
||||
"Yes": "Да",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Pridať vzdialené zariadenie",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Pre vzájomne zdieľané adresáre pridaj zariadenie od zavádzača do svojho zoznamu zariadení.",
|
||||
"Add new folder?": "Pridať nový adresár?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adresa",
|
||||
"Addresses": "Adresy",
|
||||
"Advanced": "Pokročilé",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Chyba pripojenia",
|
||||
"Connection Type": "Typ pripojenia",
|
||||
"Connections": "Spojenia",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Skoprírované odinakiaľ",
|
||||
"Copied from original": "Skopírované z originálu",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 následujúci prispivatelia:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Zlyhania zisťovania",
|
||||
"Do not restore": "Neobnovovať",
|
||||
"Do not restore all": "Neobnovovať všetko",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentácia",
|
||||
"Download Rate": "Rýchlosť sťahovania",
|
||||
"Downloaded": "Stiahnuté",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Cesta k adresáru",
|
||||
"Folder Type": "Typ adresára",
|
||||
"Folders": "Adresáre",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "Prihlasovacie heslo do GUI",
|
||||
"GUI Authentication User": "Prihlasovacie meno do GUI",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Pred spustením hlavnej aktualizácie si prosím prečítajte poznámky k vydaniu.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Zadajte prosím prihlasovanie meno a heslo v dialógovom okne nastavení.",
|
||||
"Please wait": "Prosím čakajte",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
|
||||
"Yes": "Áno",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Lägg till fjärrenhet",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Lägg enheter från introduktören till vår enhetslista för ömsesidigt delade mappar.",
|
||||
"Add new folder?": "Lägg till mapp?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adress",
|
||||
"Addresses": "Adresser",
|
||||
"Advanced": "Avancerat",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Anslutningsproblem",
|
||||
"Connection Type": "Anslutningstyp",
|
||||
"Connections": "Anslutningar",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Kopierat från annanstans",
|
||||
"Copied from original": "Kopierat från original",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 följande bidragare:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Upptäcktsmisslyckanden",
|
||||
"Do not restore": "Återställ inte",
|
||||
"Do not restore all": "Återställ inte allt",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Dokumentation",
|
||||
"Download Rate": "Hämtningshastighet",
|
||||
"Downloaded": "Hämtat",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Mappsökväg",
|
||||
"Folder Type": "Mapptyp",
|
||||
"Folders": "Mappar",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Grafiskt gränssnitt",
|
||||
"GUI Authentication Password": "Gränssnittets autentiseringslösenord",
|
||||
"GUI Authentication User": "Gränssnittets autentiseringsanvändare",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodisk skanning i givet intervall och inaktiverad visning av ändringar",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodisk skanning i givet intervall och aktiverad visning av ändringar",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodisk skanning i givet intervall och misslyckades med att ställa in visning av ändringar, försök igen varje 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Läs igenom versionsnyheterna innan den stora uppgraderingen.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Ställ in ett grafiska gränssnittets användarautentisering och lösenord i inställningsdialogrutan.",
|
||||
"Please wait": "Var god vänta",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varning, denna sökväg är en överordnad mapp av en befintlig mapp \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Varning, denna sökväg är en underkatalog till en befintlig mapp \"{{otherFolder}}\".",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varning, denna sökväg är en undermapp av en befintlig mapp \"{{otherFolderLabel}}\" ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "När du lägger till en ny enhet, kom ihåg att den här enheten måste läggas till på den andra enheten också.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "När du lägger till ny mapp, tänk på att mappens ID knyter ihop mappar mellan olika enheter. De skiftlägeskänsliga och måste matcha precis mellan alla enheter.",
|
||||
"Yes": "Ja",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Uzak Aygıt Ekle",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
|
||||
"Add new folder?": "Yeni klasör ekle?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Adres",
|
||||
"Addresses": "Adresler",
|
||||
"Advanced": "Gelişmiş Düzey",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Bağlantı hatası",
|
||||
"Connection Type": "Bağlantı Türü",
|
||||
"Connections": "Connections",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Başka bir yerden kopyalanmış",
|
||||
"Copied from original": "Aslından kopyalanmış",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Telif Hakkı © 2014-2016 takip eden Katkıcılar:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Discovery Failures",
|
||||
"Do not restore": "Do not restore",
|
||||
"Do not restore all": "Do not restore all",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Belgeleme",
|
||||
"Download Rate": "İndirme Hızı",
|
||||
"Downloaded": "İndirilmiş",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Klasör Yolu",
|
||||
"Folder Type": "Klasör Türü",
|
||||
"Folders": "Klasörler",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI / Grafiksel Kullanıcı Arayüzü",
|
||||
"GUI Authentication Password": "GUI Kimlik Doğrulaması için Kullanıcı Parolası",
|
||||
"GUI Authentication User": "GUI Kimlik Doğrulaması için Kullanıcı Adı",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Birincil bir yükseltme gerçekleştirmeden önce lütfen sürüm notlarını tetkik edin.",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "GUI üzerinden Kimlik Doğrulaması yapmak için Ayarlar penceresinde Kullanıcı ve Parola tanımlayın lütfen.",
|
||||
"Please wait": "Lütfen Bekleyin",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Uyarı ! Bu yol varolan \"{{otherFolderLabel}}\" ({{otherFolder}}) klasörünün üst dizinidir.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Uyarı ! Bu yol varolan \"{{otherFolder}}\" klasörünün alt dizinidir.",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Uyarı ! Bu yol var olan \"{{otherFolderLabel}}\" ({{otherFolder}}) klasörünün alt dizinidir.",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Yeni bir aygıt eklendiğinde, bu aygıtın karşı tarafa da eklenmesi gerektiğini unutmayın.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Yeni bir klasör eklendiğinde, Klasör ID'nin klasörleri aygıtlar arasında bağlantılandırmak için kullanıldığını unutmayın. Klasör ID'ler büyük - küçük harf duyarlıdır ve tüm aygıtlarda tamı tamına eşleşmelidir.",
|
||||
"Yes": "Evet",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "Додати віддалений пристрій",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "Додати пристрої від пристрою-рекомендувача до нашого списку пристроїв для спільно розділених директорій.",
|
||||
"Add new folder?": "Додати нову директорію?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "Адреса",
|
||||
"Addresses": "Адреси",
|
||||
"Advanced": "Розширені",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "Помилка з’єднання",
|
||||
"Connection Type": "Тип з*єднання",
|
||||
"Connections": "З'єднання",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "Скопійовано з іншого місця",
|
||||
"Copied from original": "Скопійовано з оригіналу",
|
||||
"Copyright © 2014-2016 the following Contributors:": "© 2014-2016 Всі права застережено, вклад внесли:",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "Помилки виявлення",
|
||||
"Do not restore": "Не відновлювати",
|
||||
"Do not restore all": "Не відновлювати все",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "Документація",
|
||||
"Download Rate": "Швидкість завантаження",
|
||||
"Downloaded": "Завантажено",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "Шлях до директорії",
|
||||
"Folder Type": "Тип директорії",
|
||||
"Folders": "Директорії",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "Графічний інтерфейс",
|
||||
"GUI Authentication Password": "Пароль для доступу до панелі управління",
|
||||
"GUI Authentication User": "Логін користувача для доступу до панелі управління",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "Будь ласка перегляньте примітки до випуску перед мажорним оновленням. ",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "Будь ласка, встановіть у налаштуваннях ім'я користувача та пароль до графічного інтерфейсу.",
|
||||
"Please wait": "Будь ласка, зачекайте",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Увага, цей шлях є батьківським каталогом директорії \"{{otherFolderLabel}}\" , що й так синхронізується ({{otherFolder}}).",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Увага, цей шлях є підпапкою директорії \"{{otherFolder}}\", що й так синхронізується .",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Увага, цей шлях є підпапкою директорії \"{{otherFolderLabel}}\", що й так синхронізується ({{otherFolder}}).",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "Коли додаєте новий вузол, пам’ятайте, що цей вузол повинен бути доданий і на іншій стороні.",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Коли додаєте нову директорію, пам’ятайте, що ID цієї директорії використовується для того, щоб зв’язувати директорії разом між пристроями. Назви повинні точно співпадати між усіма пристроями, регістр символів має значення.",
|
||||
"Yes": "Так",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "添加远程设备",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "将此新设备上拥有的“远程设备”都自动添加到您这边的“远程设备”列表中（如果它们跟您存在相同的文件夹的话）",
|
||||
"Add new folder?": "添加新文件夹？",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "另外，完整重新扫描的间隔将增大（时间 60，以新的默认 1 小时为例）。你也可以在选择“否”后手动配置每个文件的时间。",
|
||||
"Address": "地址",
|
||||
"Addresses": "地址列表",
|
||||
"Advanced": "高级",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "连接出错",
|
||||
"Connection Type": "连接类型",
|
||||
"Connections": "连接",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Syncthing 现在可以持续监视更改了。这将检测磁盘上的更改，然后对有修改的路径发起扫描。这样的好处是更改可以更快地传播，且需要的完整扫描会更少。",
|
||||
"Copied from elsewhere": "从其他设备复制",
|
||||
"Copied from original": "从源复制",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 以下贡献者：",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "设备发现错误",
|
||||
"Do not restore": "不要恢复",
|
||||
"Do not restore all": "不要全部恢复",
|
||||
"Do you want to enable watching for changes for all your folders?": "您想要启用对监视您所有文件夹的更改吗？",
|
||||
"Documentation": "文档",
|
||||
"Download Rate": "下载速度",
|
||||
"Downloaded": "已下载",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "文件夹路径",
|
||||
"Folder Type": "文件夹类型",
|
||||
"Folders": "文件夹",
|
||||
"Full Rescan Interval (s)": "完整扫描间隔",
|
||||
"GUI": "图形用户界面",
|
||||
"GUI Authentication Password": "图形管理界面密码",
|
||||
"GUI Authentication User": "图形管理界面用户名",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "正以给定的间隔定期扫描并已禁用更改监视",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "正以给定的间隔定期扫描并已启用更改监视",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "正以给定的间隔定期扫描但设置更改监视失败，正在以每 1m 一次重试：",
|
||||
"Permissions": "权限",
|
||||
"Please consult the release notes before performing a major upgrade.": "请在进行重大更新前查看发布说明。",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "请在设置对话框中设置 GUI 验证用户及其密码。",
|
||||
"Please wait": "请稍候",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告，该路径是已有文件夹\"{{otherFolderLabel}}\" ({{otherFolder}})的上级目录。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "警告，该路径是已有文件夹\"{{otherFolder}}\"的下级目录。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告，该路径是已有文件夹\"{{otherFolderLabel}}\" ({{otherFolder}})的下级目录。",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "警告：如果你在使用外部的监视器如 {{syncthingInotify}}，你应该确保它已经取消激活。",
|
||||
"Watch for Changes": "监视更改",
|
||||
"Watching for Changes": "正在监视更改",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "若您在本机添加新设备，记住您也必须在这个设备上添加本机。",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "若你添加了新文件夹，记住文件夹 ID 是用以在不同设备间建立联系的。在不同设备间拥有相同 ID 的文件夹将会被同步。且文件夹 ID 区分大小写。",
|
||||
"Yes": "是",
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@
|
|||
"Add Remote Device": "新增遠端裝置",
|
||||
"Add devices from the introducer to our device list, for mutually shared folders.": "對於共用的資料夾，匯入引入者的裝置清單。",
|
||||
"Add new folder?": "新增資料夾?",
|
||||
"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.",
|
||||
"Address": "位址",
|
||||
"Addresses": "位址",
|
||||
"Advanced": "進階",
|
||||
|
|
@ -49,6 +50,7 @@
|
|||
"Connection Error": "連線錯誤",
|
||||
"Connection Type": "連接類型",
|
||||
"Connections": "連線",
|
||||
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.",
|
||||
"Copied from elsewhere": "從別處複製",
|
||||
"Copied from original": "從原處複製",
|
||||
"Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 下列貢獻者：",
|
||||
|
|
@ -75,6 +77,7 @@
|
|||
"Discovery Failures": "探索失敗",
|
||||
"Do not restore": "不要還原",
|
||||
"Do not restore all": "不要還原全部",
|
||||
"Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
|
||||
"Documentation": "說明文件",
|
||||
"Download Rate": "下載速率",
|
||||
"Downloaded": "已下載",
|
||||
|
|
@ -114,6 +117,7 @@
|
|||
"Folder Path": "資料夾路徑",
|
||||
"Folder Type": "資料夾類型",
|
||||
"Folders": "資料夾",
|
||||
"Full Rescan Interval (s)": "Full Rescan Interval (s)",
|
||||
"GUI": "GUI",
|
||||
"GUI Authentication Password": "GUI 認證密碼",
|
||||
"GUI Authentication User": "GUI 使用者認證名稱",
|
||||
|
|
@ -193,6 +197,7 @@
|
|||
"Periodic scanning at given interval and disabled watching for changes": "在一定的時間間隔，定期掃描及關閉觀察變動",
|
||||
"Periodic scanning at given interval and enabled watching for changes": "在一定的時間間隔，定期掃描及啟用觀察變動",
|
||||
"Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "在一定的時間間隔，定期掃描，無法設定觀察變動，每 1 分鐘重試：",
|
||||
"Permissions": "Permissions",
|
||||
"Please consult the release notes before performing a major upgrade.": "執行重大升級前請先參閱版本資訊。",
|
||||
"Please set a GUI Authentication User and Password in the Settings dialog.": "請在設定對話方塊內設置 GUI 使用者認證名稱及密碼。",
|
||||
"Please wait": "請稍後",
|
||||
|
|
@ -328,6 +333,9 @@
|
|||
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告，此路徑是現存資料夾 \"{{otherFolderLabel}}\" ({{otherFolder}}) 的上級目錄。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "警告，此路徑是現存資料夾 \"{{otherFolder}}\" 的下級目錄。",
|
||||
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告，此路徑是現存資料夾 \"{{otherFolderLabel}}\" ({{otherFolder}}) 的下級目錄。",
|
||||
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
|
||||
"Watch for Changes": "Watch for Changes",
|
||||
"Watching for Changes": "Watching for Changes",
|
||||
"When adding a new device, keep in mind that this device must be added on the other side too.": "當新增一個裝置時，務必記住，當前的這個裝置也同樣必須被添加至另一邊。",
|
||||
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "當新增一個資料夾時，請記住，資料夾識別碼是用來將裝置之間的資料夾綁定在一起的。它們有區分大小寫，且必須在所有裝置之間完全相同。",
|
||||
"Yes": "是",
|
||||
|
|
|
|||
Loading…
Reference in New Issue