gui, man: Update docs & translations

gui/default/assets/lang/lang-bg.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Устройство, което последно промени обекта",
     "Devices": "Устройства",
     "Disabled": "Деактивирано",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Не е свързано",
     "Discovered": "Открит",
     "Discovery": "Откриване",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Промяна на  {{path}}.",
     "Enable NAT traversal": "Разреши NAT traversal",
     "Enable Relaying": "Разреши препращане",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Въведете не отрицателно число (пр. \"2.35\") и изберете единица.\nПроцентите са като част от размера на цялото дисково пространство.",
     "Enter a non-privileged port number (1024 - 65535).": "Въведете непривилегирован номер на порт (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведете адреси разделени със запетая (\"tcp://ip:port\", \"tcp://host:port\") или \"dynamic\", за да автоматично откриване на наличните адреси.",
@@ -185,7 +188,9 @@
     "Pause": "Пауза",
     "Pause All": "Пауза на висчко",
     "Paused": "На пауза",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Моля прочети бележките по обновяването преди да започнеш.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Моля задайте потребителско име и парола за потребителския интерфейс в секцията Настройки.",
     "Please wait": "Моля изчакай",

gui/default/assets/lang/lang-ca@valencia.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Dispositius",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Desconnectat",
     "Discovered": "Descobert",
     "Discovery": "Descobriment",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editant {{path}}.",
     "Enable NAT traversal": "Permetre NAT transversal",
     "Enable Relaying": "Permetre Transmissions",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introdueix un nombre no negatiu (per exemple, \"2.35\") i selecciona una unitat. Els percentatges són com a part del tamany total del disc.",
     "Enter a non-privileged port number (1024 - 65535).": "Introdueix un nombre de port sense privilegis (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introdueix adreces separades per coma (\"tcp://ip:port\", \"tcp://host:port\") o \"dynamic\" per a realitzar el descobriment automàtic de l'adreça.",
@@ -185,7 +188,9 @@
     "Pause": "Pausa",
     "Pause All": "Pausa Tot",
     "Paused": "Pausat",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Per favor, consultar les notes de la versió abans de fer una actualització important.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Per favor, estableix un usuari i password per a l'Interfície Gràfica d'Usuari en el menú d'Adjustos.",
     "Please wait": "Per favor, espere",

gui/default/assets/lang/lang-cs.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Poslední přístroj, který modifikoval položku",
     "Devices": "Přístroje",
     "Disabled": "Vypnuto",
-    "Disabled periodic scanning": "Periodické skenování zakázáno",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Odpojen",
     "Discovered": "Nalezeno",
     "Discovery": "Oznamování",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editace {{path}}.",
     "Enable NAT traversal": "Povolit NAT přenos",
     "Enable Relaying": "Povolit přenašeče",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Zadajte kladné číslo (např. \"2.35\") a zvolte jednotku. Percenta znamenají část celkové velikosti disku.",
     "Enter a non-privileged port number (1024 - 65535).": "Zadejte číslo neprivilegovaného portu (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadejte adresy oddělené čárkou (\"tcp://ip:port\", \"tcp://host:port\") nebo \"dynamic\" pro automatické zjišťování adres.",
@@ -185,7 +188,9 @@
     "Pause": "Pozastavit",
     "Pause All": "Pozastavit vše",
     "Paused": "Pozastaveno",
-    "Periodic scan every": "Periodické skenování každých",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Před spuštěním důležité aktualizace si nejdříve přečtěte poznámky k vydání nové verze.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Zadejte prosím přihlašovací jméno a heslo pro GUI v dialogu nastavení.",
     "Please wait": "Chvíli strpení",

gui/default/assets/lang/lang-da.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Enheder",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Ikke tilsluttet",
     "Discovered": "Opdaget",
     "Discovery": "Opslag",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Redigerer {{path}}.",
     "Enable NAT traversal": "Aktiver NAT",
     "Enable Relaying": "Aktiver Relaying",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Angiv kommaseparerede adresser (\"tcp://ip:port\", \"tcp://host:port\") eller \"dynamic\" for at benytte automatisk opdagelse af adressen.",
@@ -185,7 +188,9 @@
     "Pause": "Pause",
     "Pause All": "Sæt alt på pause",
     "Paused": "Pauset",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Tjek venligst udgivelsesnoterne før opgradering til en ny version.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Sæt vensligt en GUI bruger og kodeord i opsætningsdialogen.",
     "Please wait": "Vent venligst",

gui/default/assets/lang/lang-de.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Gerät, das das Element zuletzt geändert hat",
     "Devices": "Geräte",
     "Disabled": "Deaktiviert",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Getrennt",
     "Discovered": "Ermittelt",
     "Discovery": "Gerätesuche",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Bearbeite {{path}}.",
     "Enable NAT traversal": "NAT-Durchdringung aktivieren",
     "Enable Relaying": "Weiterleitung aktivieren",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Geben Sie eine positive Zahl ein (z.B. \"2.35\") und wählen Sie eine Einheit. Prozentsätze sind Teil der gesamten Festplattengröße.",
     "Enter a non-privileged port number (1024 - 65535).": "Geben Sie eine nichtprivilegierte Portnummer ein (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Kommagetrennte Adressen (\"tcp://ip:port\", \"tcp://host:port\") oder \"dynamic\" eingeben, um die Adresse automatisch zu ermitteln.",
@@ -185,7 +188,9 @@
     "Pause": "Pause",
     "Pause All": "Alles pausieren",
     "Paused": "Pausiert",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Bitte lesen Sie die Veröffentlichungshinweise bevor Sie eine Hauptversionsaktualisierung installieren.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Bitte lege einen Benutzer und ein Passwort für die Benutzeroberfläche in den Einstellungen fest.",
     "Please wait": "Bitte warten",

gui/default/assets/lang/lang-el.json

@@ -33,7 +33,7 @@
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Για τις αυτόματες αναβαθμίσεις μπορείτε πλέον να επιλέξετε μεταξύ σταθερών εκδόσεων και υποψήφιων εκδόσεων.",
     "Automatic upgrades": "Αυτόματη αναβάθμιση",
     "Automatically create or share folders that this device advertises at the default path.": "Αυτόματη δημιουργία ή κοινή χρήση φακέλων τους οποίους ανακοινώνει αυτή η συσκευή στην προκαθορισμένη διαδρομή.",
-    "Available debug logging facilities:": "Available debug logging facilities:",
+    "Available debug logging facilities:": "Διαθέσιμες επιλογές μηνυμάτων αποσφαλμάτωσης:",
     "Be careful!": "Με προσοχή!",
     "Bugs": "Bugs",
     "CPU Utilization": "Επιβάρυνση του επεξεργαστή",
@@ -65,7 +65,9 @@
     "Device that last modified the item": "Συσκευή από την οποία πραγματοποιήθηκε η τελευταία τροποποίηση του στοιχείου",
     "Devices": "Συσκευές",
     "Disabled": "Απενεργοποιημένη",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Έχουν απενεργοποιηθεί η τακτική σάρωση και η επιτήρηση αλλαγών",
+    "Disabled periodic scanning and enabled watching for changes": "Έχει απενεργοποιηθεί η τακτική σάρωση και ενεργοποιηθεί η επιτήρηση αλλαγών",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Έχει απενεργοποιηθεί η τακτική σάρωση και απέτυχε η ενεργοποίηση επιτήρησης αλλαγών. Γίνεται νέα προσπάθεια κάθε 1m:",
     "Disconnected": "Αποσυνδεδεμένη",
     "Discovered": "Βάσει ανεύρεσης",
     "Discovery": "Ανεύρεση συσκευών",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Επεξεργασία του {{path}}.",
     "Enable NAT traversal": "Ενεργοποίηση διάσχισης NAT",
     "Enable Relaying": "Ενεργοποίηση αναμετάδοσης",
+    "Enabled": "Ενεργοποιημένη",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Εισάγετε έναν μη αρνητικό αριθμό (π.χ. «2.35») και επιλέξτε μια μονάδα μέτρησης. Τα ποσοστά ισχύουν ως προς το συνολικό μέγεθος του δίσκου.",
     "Enter a non-privileged port number (1024 - 65535).": "Εισάγετε τον αριθμό μιας μη δεσμευμένης θύρας (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Εισάγετε τις διευθύνσεις χωρισμένες με κόμμα (\"tcp://ip:port\", \"tcp://host:port\") ή γράψτε \"dynamic\" για την αυτόματη ανεύρεση τους.",
@@ -90,7 +93,7 @@
     "Error": "Σφάλμα",
     "External File Versioning": "Εξωτερική τήρηση εκδόσεων",
     "Failed Items": "Αρχεία που απέτυχαν",
-    "Failed to setup, retrying": "Failed to setup, retrying",
+    "Failed to setup, retrying": "Αποτυχία ενεργοποίησης, γίνεται νέα προσπάθεια",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Είναι φυσιολογική η αποτυχία σύνδεσης σε εξυπηρετητές IPv6 όταν δεν υπάρχει συνδεσιμότητα IPv6.",
     "File Pull Order": "Σειρά με την οποία θα κατεβαίνουν τα αρχεία",
     "File Versioning": "Τήρηση εκδόσεων αρχείων",
@@ -185,7 +188,9 @@
     "Pause": "Παύση",
     "Pause All": "Παύση όλων",
     "Paused": "Σε παύση",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Τακτική σάρωση ανά καθορισμένο διάστημα και απενεργοποίηση επιτήρησης αλλαγών",
+    "Periodic scanning at given interval and enabled watching for changes": "Τακτική σάρωση ανά καθορισμένο διάστημα και ενεργοποίηση επιτήρησης αλλαγών",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Τακτική σάρωση ανά καθορισμένο διάστημα και αποτυχία ενεργοποίησης επιτήρησης αλλαγών. Γίνεται νέα προσπάθεια κάθε 1m:",
     "Please consult the release notes before performing a major upgrade.": "Παρακαλούμε, πριν από την εκτέλεση μιας σημαντικής αναβάθμισης, να συμβουλευτείς το σημείωμα που τη συνοδεύει.  ",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Παρακαλώ όρισε στις ρυθμίσεις έναν χρήστη και έναν κωδικό πρόσβασης για τη διεπαφή.",
     "Please wait": "Παρακαλώ περιμένετε",
@@ -208,7 +213,7 @@
     "Rescan": "Έλεγξε για αλλαγές",
     "Rescan All": "Έλεγξέ τα όλα για αλλαγές",
     "Rescan Interval": "Κάθε πότε θα ελέγχεται για αλλαγές ",
-    "Rescans": "Rescans",
+    "Rescans": "Επανασαρώσεις",
     "Restart": "Επανεκκίνηση",
     "Restart Needed": "Απαιτείται επανεκκίνηση",
     "Restarting": "Επανεκκίνηση",
@@ -217,7 +222,7 @@
     "Resume": "Συνέχεια",
     "Resume All": "Συνέχιση όλων",
     "Reused": "Χρησιμοποιήθηκε ξανά",
-    "Running": "Running",
+    "Running": "Εκτελείται",
     "Save": "Αποθήκευση",
     "Scan Time Remaining": "Εναπομείναντας χρόνος για τον έλεγχο ",
     "Scanning": "Έλεγχος για αλλαγές",

gui/default/assets/lang/lang-en-GB.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Devices",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Disconnected",
     "Discovered": "Discovered",
     "Discovery": "Discovery",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editing {{path}}.",
     "Enable NAT traversal": "Enable NAT traversal",
     "Enable Relaying": "Enable Relaying",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
@@ -185,7 +188,9 @@
     "Pause": "Pause",
     "Pause All": "Pause All",
     "Paused": "Paused",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialogue.",
     "Please wait": "Please wait",

gui/default/assets/lang/lang-en.json

@@ -22,6 +22,7 @@
    "Allowed Networks": "Allowed Networks",
    "Alphabetic": "Alphabetic",
    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
+   "An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.": "An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "An external command handles the versioning. It has to remove the file from the synced folder.",
    "Anonymous Usage Reporting": "Anonymous Usage Reporting",
    "Anonymous usage report format has changed. Would you like to move to the new format?": "Anonymous usage report format has changed. Would you like to move to the new format?",

gui/default/assets/lang/lang-eo.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Aparatoj",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Malkonektita",
     "Discovered": "Malkovrita",
     "Discovery": "Malkovro",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Redaktado {{path}}.",
     "Enable NAT traversal": "Ŝaltu trairan NAT",
     "Enable Relaying": "Ŝaltu Relajsadon",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enigi adresojn dividitajn per komoj (\"tcp://ip:port\", \"tcp://host:port\") aŭ \"dynamic\" por elfari aŭtomatan malkovradon de la adreso.",
@@ -185,7 +188,9 @@
     "Pause": "Paŭzu",
     "Pause All": "Paŭzu Ĉion",
     "Paused": "Paŭzita",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Bonvolu konsulti la eldonitajn notojn antaŭ elfari ĉefan ĝisdatigon.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Bonvolu agordi GUI Authentication Uzanto kaj Pasvorto en la agordoj dialogo.",
     "Please wait": "Bonvolu atendi",

gui/default/assets/lang/lang-es-ES.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Dispositivos",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Desconectado",
     "Discovered": "Descubierto",
     "Discovery": "Descubrimiento",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editando {{path}}.",
     "Enable NAT traversal": "Permitir NAT transversal",
     "Enable Relaying": "Habilitar Retransmisión",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca las direcciones, separadas por comas (\"tcp://ip:port\", \"tcp://host:port\"), o \"dynamic\" para llevar a cabo el descubrimiento automático de la dirección.",
@@ -185,7 +188,9 @@
     "Pause": "Pausar",
     "Pause All": "Pausar todo",
     "Paused": "Pausado",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
     "Please wait": "Por favor, espere",

gui/default/assets/lang/lang-es.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Dispositivo que modificó por última vez el ítem",
     "Devices": "Dispositivos",
     "Disabled": "Deshabilitado",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Desconectado",
     "Discovered": "Descubierto",
     "Discovery": "Descubrimiento",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editando {{path}}.",
     "Enable NAT traversal": "Permitir NAT transversal",
     "Enable Relaying": "Habilitar Retransmisión",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca las direcciones, separadas por comas (\"tcp://ip:port\", \"tcp://host:port\"), o \"dynamic\" para llevar a cabo el descubrimiento automático de la dirección.",
@@ -185,7 +188,9 @@
     "Pause": "Pausar",
     "Pause All": "Pausar todo",
     "Paused": "Pausado",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
     "Please wait": "Por favor, espere",

gui/default/assets/lang/lang-eu.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Tresnak",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Deskonektatua",
     "Discovered": "Agertua",
     "Discovery": "Agertzea",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Muntatzea {{path}}",
     "Enable NAT traversal": "NAT translazioa aktibatu",
     "Enable Relaying": "Aldizkatzea posible",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatiboa ez den zenbaki bat hauta ezazu (\"2.35\" adib.) bai eta unitate bat. Disko osoaren  ehuneko espazioa",
     "Enter a non-privileged port number (1024 - 65535).": "Abantailatua ez den portu zenbalki bat sar ezazu (1024 - 65535)",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": " (\"tcp://ip:ataka\", \"tcp://izena:ataka\") zuzenbideak sar, krakotx batez separatuak edo bestenaz \"dynamic\", zuzenbidearen xekatze automatikoa aktibatzeko",
@@ -185,7 +188,9 @@
     "Pause": "Pausa",
     "Pause All": "Geldi dena",
     "Paused": "Gelditua",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Aktualizatze garrantzitsu bat egin baino lehen, bertsioaren oharrak begira itzazu.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Konfigurazio leihoan asma itzazu erabiltzale izen bat eta pasahitz bat",
     "Please wait": "Pazientzia pixka bat, otoi",

gui/default/assets/lang/lang-fr-CA.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Appareil",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Déconnecté",
     "Discovered": "Découvert",
     "Discovery": "Découverte",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Modification de {{path}}.",
     "Enable NAT traversal": "Activer transfert d'adresses NAT",
     "Enable Relaying": "Activer le relayage",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Nombre positif (p.ex, \"2.35\") et unité. Pourcentage de l'espace disque total.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://hôte:port\") séparées par une virgule, ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
@@ -185,7 +188,9 @@
     "Pause": "Pause",
     "Pause All": "Tout suspendre",
     "Paused": "En pause",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans les réglages.",
     "Please wait": "Merci de patienter",

gui/default/assets/lang/lang-fr.json

@@ -8,8 +8,8 @@
     "Actions": "Actions",
     "Add": "Ajouter",
     "Add Device": "Ajouter l'appareil",
-    "Add Folder": "Ajouter un partage",
-    "Add Remote Device": "Ajouter un appareil",
+    "Add Folder": "Ajouter un partage...",
+    "Add Remote Device": "Ajouter un appareil...",
     "Add devices from the introducer to our device list, for mutually shared folders.": "ATTENTION !!! Lui permettre d'ajouter et enlever des membres à toutes mes listes de membres des partages dont il fait (ou fera !) partie (ceci permet de créer automatiquement toutes les liaisons point à point possibles en complétant mes listes par les siennes, meilleur débit de réception par cumul des débits d'envoi, indépendance vis à vis de l'introducteur, etc).",
     "Add new folder?": "Ajouter ce partage ?",
     "Address": "Adresse",
@@ -21,7 +21,7 @@
     "Allow Anonymous Usage Reporting?": "Autoriser l'envoi de statistiques d'utilisation anonymisées ?",
     "Allowed Networks": "Réseaux autorisés",
     "Alphabetic": "Alphabétique",
-    "An external command handles the versioning. It has to remove the file from the shared folder.": "Une commande externe gère les versions de fichiers. Il lui incombe de supprimer les fichiers dans le répertoire synchronisé.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Une commande externe gère les versions de fichiers. Il lui incombe de supprimer les fichiers du répertoire partagé. Si le chemin contient des espaces, il doit être spécifié entre guillemets.",
     "An external command handles the versioning. It has to remove the file from the synced folder.": "Une commande externe gère les versions de fichiers. Il lui incombe de supprimer les fichiers dans le répertoire synchronisé.",
     "Anonymous Usage Reporting": "Rapport anonyme de statistiques d'utilisation",
     "Anonymous usage report format has changed. Would you like to move to the new format?": "Le format du rapport anonyme d'utilisation a changé. Voulez-vous passer au nouveau format ?",
@@ -55,7 +55,7 @@
     "Creating ignore patterns, overwriting an existing file at {%path%}.": "Création de masques d'exclusion, remplacement du fichier existant : {{path}}.",
     "Danger!": "Attention !",
     "Debugging Facilities": "Outils de débogage",
-    "Default Folder Path": "Chemin par défaut des partages",
+    "Default Folder Path": "Chemin parent par défaut pour les nouveaux partages",
     "Deleted": "Supprimé",
     "Device": "Appareil",
     "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "\"{{name}}\" ({{device}}), appareil actuellement à {{address}}, demande à se connecter.\nAcceptez-vous de l'ajouter à votre liste d'appareils connus ?",
@@ -65,7 +65,9 @@
     "Device that last modified the item": "Dernier appareil modificateur",
     "Devices": "Appareils",
     "Disabled": "Désactivé",
-    "Disabled periodic scanning": "Dynamique",
+    "Disabled periodic scanning and disabled watching for changes": "Analyse périodique et surveillance des changements désactivées.",
+    "Disabled periodic scanning and enabled watching for changes": "Analyse périodique désactivée et surveillance des changements activée.",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Analyse périodique désactivée et échec d'activation de la surveillance des changements. Nouvel essai toutes les 1mn :",
     "Disconnected": "Déconnecté",
     "Discovered": "Découvert",
     "Discovery": "Découverte",
@@ -76,13 +78,14 @@
     "Download Rate": "Débit de réception",
     "Downloaded": "Reçu",
     "Downloading": "Réception",
-    "Edit": "Gérer",
+    "Edit": "Gérer...",
     "Edit Device": "Gérer l'appareil",
     "Edit Folder": "Gérer le partage",
     "Editing": "Modifications",
     "Editing {%path%}.": "Modification de {{path}}.",
     "Enable NAT traversal": "Activer la translation d'adresses (NAT)",
     "Enable Relaying": "Relayage possible",
+    "Enabled": "Activée",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Nombre positif (p.ex, \"2.35\") et unité. Pourcentage de l'espace disque total.",
     "Enter a non-privileged port number (1024 - 65535).": "Entrez un n° de port non-privilégié (1024 - 65535)",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://hôte:port\") séparées par une virgule, ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
@@ -124,7 +127,7 @@
     "Help": "Aide",
     "Home page": "Page d'accueil",
     "Ignore": "Ignorer",
-    "Ignore Patterns": "Exclusions ...",
+    "Ignore Patterns": "Exclusions...",
     "Ignore Permissions": "Ignorer les permissions",
     "Incoming Rate Limit (KiB/s)": "Limite du débit de réception (Kio/s)",
     "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Une configuration incorrecte peut créer des dommages dans vos répertoires et mettre Syncthing hors-service.",
@@ -185,7 +188,9 @@
     "Pause": "Pause",
     "Pause All": "Tout suspendre",
     "Paused": "En pause",
-    "Periodic scan every": "Intervalle",
+    "Periodic scanning at given interval and disabled watching for changes": "Analyse périodique à intervalle défini et surveillance des changements désactivée.",
+    "Periodic scanning at given interval and enabled watching for changes": "Analyse périodique à intervalle défini et surveillance des changements activée.",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Analyse périodique à intervalle défini et échec d'activation de la surveillance des changements. Nouvel essai toutes les 1mn :",
     "Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans la fenêtre de Configuration.",
     "Please wait": "Merci de patienter",
@@ -196,12 +201,12 @@
     "Quick guide to supported patterns": "Guide rapide des masques compatibles ci-dessous",
     "RAM Utilization": "Utilisation de la RAM",
     "Random": "Aléatoire",
-    "Recent Changes": "Changements récents",
+    "Recent Changes": "Changements récents...",
     "Reduced by ignore patterns": "(Limité par des masques d'exclusion)",
     "Release Notes": "Notes de version",
     "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Les versions préliminaires contiennent les dernières fonctionnalités et derniers correctifs. Elles sont identiques aux traditionnelles mises à jour bimensuelles.",
     "Remote Devices": "Autres appareils",
-    "Remove": "Supprimer",
+    "Remove": "Supprimer...",
     "Remove Device": "Supprimer l'appareil",
     "Remove Folder": "Supprimer le partage",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Identifiant du partage. Doit être le même sur tous les appareils concernés (généré aléatoirement, mais modifiable à la création).",
@@ -314,7 +319,7 @@
     "Usage reporting is always enabled for candidate releases.": "Les statistiques d'utilisation sont toujours envoyées pour les versions préliminaires.",
     "Use HTTPS for GUI": "Utiliser l'HTTPS pour le GUI",
     "Version": "Version",
-    "Versions": "Versions",
+    "Versions": "Restauration...",
     "Versions Path": "Emplacement des versions",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les plus anciennes versions seront supprimées automatiquement quand elles dépassent la durée maximum de conservation ou si leur nombre (par fichier) est supérieur à la limite prédéfinie pour l'intervalle.",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolder}}\"). Si c'est bien ce que vous souhaitez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",

gui/default/assets/lang/lang-fy.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Apparaat dat dit item it lêst oanpast hat",
     "Devices": "Apparaten",
     "Disabled": "Utskeakele",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Ferbining ferbrutsen",
     "Discovered": "Untdekt",
     "Discovery": "Untdekking",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "{{path}} wurd bewurke.",
     "Enable NAT traversal": "NAT-trochkruse ynskeakelje",
     "Enable Relaying": "Trochjaan tastean",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Fier in net-negatyf nûmer yn (bygelyks \"2.35\") en selektearje in ienheid. Percentages stean foar it part fan de totale skiifromte.",
     "Enter a non-privileged port number (1024 - 65535).": "Fier in net-befoarrjochte poart-nûmer yn (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Fier troch komma's skieden (\"tcp://ip:port\", \"tcp://host:port\") adressen yn of \"dynamic\" om automatyske ûntdekking fan it adres út te fieren.",
@@ -185,7 +188,9 @@
     "Pause": "Skoftsje",
     "Pause All": "Alles skoftsje",
     "Paused": "Skoftet",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Foardat jo in wichtige fernijing ynstallearre, graach earst de fernijingsoantekenings lêze.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Graach foar GUI-ferifikaasje in brûkers-ID en wachtwurd ynstelle yn it ynstellingsdialooch.",
     "Please wait": "In amerijke",

gui/default/assets/lang/lang-hu.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Az eszköz, amely utoljára módosította az elemet",
     "Devices": "Eszközök",
     "Disabled": "Letiltva",
-    "Disabled periodic scanning": "Periodikus átnézés letiltva",
+    "Disabled periodic scanning and disabled watching for changes": "A periodikus átnézés és a változások keresése letiltva",
+    "Disabled periodic scanning and enabled watching for changes": "A periodikus átnézés letiltva a változások keresése engedélyezve",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "A periodikus átnézés letiltva és a változások keresésének beállítása sikertelen, 1 percenként újrapróbálkozás:",
     "Disconnected": "Kapcsolat bontva",
     "Discovered": "Felfedezett",
     "Discovery": "Felfedezés",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "{{path}} szerkesztése.",
     "Enable NAT traversal": "NAT bejárás engedélyezése",
     "Enable Relaying": "Közvetítés engedélyezése",
+    "Enabled": "Engedélyezve",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Adj meg egy nem-negatív számot (pl. \"2.35\") és válassz egy mértékegységet. A százalékok a teljes lemezméretre vonatkoznak.",
     "Enter a non-privileged port number (1024 - 65535).": "Adj meg egy nem privilegizált port számot (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Vesszővel elválasztva több cím is bevihető (\"tcp://ip:port\", \"tcp://host:port\"), az automatikus felderítéshez a 'dynamic' kulcsszó használatos. ",
@@ -185,7 +188,9 @@
     "Pause": "Szünet",
     "Pause All": "Mindent szüneteltet",
     "Paused": "Szünetel",
-    "Periodic scan every": "Periodikus átnézés gyakorisága",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodikus átnézés a megadott időközönként és a változások keresése letiltva",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodikus átnézés a megadott időközönként és a változások keresése engedélyezve",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodikus átnézés a megadott időközönként és a változások keresésének beállítása sikertelen, 1 percenként újrapróbálkozás:",
     "Please consult the release notes before performing a major upgrade.": "Nagyobb frissítés előtt ellenőrizni kell a kiadási megjegyzéseket.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Be kell állítani a grafikus felület felhasználónevét és jelszavát a Beállítások párbeszédablakban.",
     "Please wait": "Türelem",

gui/default/assets/lang/lang-it.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Dispositivo che ha modificato l'elemento per ultimo",
     "Devices": "Dispositivi",
     "Disabled": "Disabilitato",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Scansione periodica disabilitata e verifica cambiamenti disabilitata",
+    "Disabled periodic scanning and enabled watching for changes": "Scansione periodica disabilitata e verifica cambiamenti abilitata",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Scansione periodica disabilitata e configurazione fallita della verifica cambiamenti, nuovo tentativo ogni 1m:",
     "Disconnected": "Disconnesso",
     "Discovered": "Individuato",
     "Discovery": "Individuazione",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Modifica di {{path}}.",
     "Enable NAT traversal": "Abilita NAT traversal",
     "Enable Relaying": "Abilita Reindirizzamento",
+    "Enabled": "Abilitato",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Inserisci un numero non negativo (ad esempio \"2.35\") e seleziona un'unità. Le percentuali sono parte della dimensione totale del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Inserisci un numero di porta non-privilegiata (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Inserisci indirizzi separati da virgola (\"tcp://ip:porta\", \"tcp://host:porta\")  oppure \"dynamic\" per effettuare il rilevamento automatico dell'indirizzo.",
@@ -90,7 +93,7 @@
     "Error": "Errore",
     "External File Versioning": "Controllo Versione Esterno",
     "Failed Items": "Elementi Errati",
-    "Failed to setup, retrying": "Failed to setup, retrying",
+    "Failed to setup, retrying": "Configurazione fallita, riprovo",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "La connessione a server IPv6 fallisce se non c'è connettività IPv6.",
     "File Pull Order": "Ordine Prelievo File",
     "File Versioning": "Controllo Versione File",
@@ -185,7 +188,9 @@
     "Pause": "Pausa",
     "Pause All": "Pausa Tutti",
     "Paused": "In Pausa",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Scansione periodica a intervalli determinati e verifica cambiamenti disabilitata",
+    "Periodic scanning at given interval and enabled watching for changes": "Scansione periodica a intervalli determinati e verifica cambiamenti abilitata",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Scansione periodica a intervalli determinati e configurazione fallita della verifica cambiamenti, nuovo tentativo ogni 1m:",
     "Please consult the release notes before performing a major upgrade.": "Si prega di consultare le note di rilascio prima di eseguire un aggiornamento principale.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Per favore impostare Utente e Password dell'Interfaccia Grafica nelle Impostazioni.",
     "Please wait": "Attendere prego",
@@ -208,7 +213,7 @@
     "Rescan": "Riscansiona",
     "Rescan All": "Riscansiona Tutto",
     "Rescan Interval": "Intervallo Scansione",
-    "Rescans": "Rescans",
+    "Rescans": "Ri-scansione",
     "Restart": "Riavvia",
     "Restart Needed": "Riavvio Necessario",
     "Restarting": "Riavvio",
@@ -217,7 +222,7 @@
     "Resume": "Riprendi",
     "Resume All": "Riprendi Tutti",
     "Reused": "Riutilizzato",
-    "Running": "Running",
+    "Running": "In esecuzione",
     "Save": "Salva",
     "Scan Time Remaining": "Tempo di Scansione Rimanente",
     "Scanning": "Scansione in corso",

gui/default/assets/lang/lang-ja.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "デバイス",
     "Disabled": "無効",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "切断中",
     "Discovered": "探索結果",
     "Discovery": "探索サーバー",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "{{path}} を編集中",
     "Enable NAT traversal": "NATトラバーサルを有効にする",
     "Enable Relaying": "中継サーバー経由の通信を有効にする",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "0以上の数 (例: 2.35) を入力し、単位を選択してください。パーセントはディスク容量全体に対する割合です。",
     "Enter a non-privileged port number (1024 - 65535).": "非特権ポート番号 (1024 - 65535) を入力してください。",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "アドレスを指定する場合は「tcp://IPアドレス:ポート, tcp://ホスト名:ポート」のようにコンマで区切って入力してください。自動探索を行う場合は「dynamic」と入力してください。",
@@ -185,7 +188,9 @@
     "Pause": "一時停止",
     "Pause All": "すべて一時停止",
     "Paused": "一時停止中",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "メジャーアップグレードを行う前にリリースノートを参照してください。",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "設定ダイアログから、GUI認証ユーザー名とパスワードを設定してください。",
     "Please wait": "お待ちください",

gui/default/assets/lang/lang-ko-KR.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "기기",
     "Disabled": "비활성화",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "연결 끊김",
     "Discovered": "탐색됨",
     "Discovery": "탐색",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "{{path}} 수정하기.",
     "Enable NAT traversal": "NAT traversal 활성화",
     "Enable Relaying": "Relaying 활성화",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "음수가 아닌 수 (예, \"2.35\") 를 입력 후 단위를 선택하세요. 백분율은 총 디스크 크기의 일부입니다.",
     "Enter a non-privileged port number (1024 - 65535).": "비 특권 포트 번호를 입력하세요 (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "주소 자동 검색을 하기 위해서는 \"ip:port\" 형식의 주소들을 쉼표로 구분해서 입력하거나 \"dynamic\"을 입력하세요.",
@@ -185,7 +188,9 @@
     "Pause": "일시 중지",
     "Pause All": "모두 일시 중지",
     "Paused": "일시 중지됨",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "메이저 업데이트를 하기 전에 먼저 릴리즈 노트를 살펴보세요.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "설정에서 GUI 인증용 User와 암호를 입력해주세요.",
     "Please wait": "기다려 주십시오",

gui/default/assets/lang/lang-lt.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Įrenginys, kuris paskutinis modifikavo elementą",
     "Devices": "Įrenginiai",
     "Disabled": "Išjungta",
-    "Disabled periodic scanning": "Periodinis nuskaitymas išjungtas",
+    "Disabled periodic scanning and disabled watching for changes": "Išjungtas periodinis nuskaitymas ir išjungtas pakeitimų stebėjimas",
+    "Disabled periodic scanning and enabled watching for changes": "Išjungtas periodinis nuskaitymas ir įjungtas pakeitimų stebėjimas",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Išjungtas periodinis nuskaitymas ir nepavykęs nustatyti pakeitimų stebėjimas, bandoma iš naujo kas 1 min.:",
     "Disconnected": "Atsijungęs",
     "Discovered": "Atrastas",
     "Discovery": "Lokacija",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Redaguojama {{path}}.",
     "Enable NAT traversal": "Leisti kirsti NAT",
     "Enable Relaying": "Įjungti retransliavimą",
+    "Enabled": "Įjungta",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Įveskite neneigiamąjį skaičių (pvz., \"2.35\") ir pasirinkite įtaisą. Procentai yra skaičiuojami kaip viso disko dydžio dalis.",
     "Enter a non-privileged port number (1024 - 65535).": "Įveskite neprivilegijuoto prievado numerį (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Įveskite kableliais atskirtus (\"tcp://ip:prievadas\", \"tcp://serveris:prievadas\") adresus arba \"dynamic\", kad atliktumėte automatinį adresų aptikimą.",
@@ -185,7 +188,9 @@
     "Pause": "Pristabdyti",
     "Pause All": "Pristabdyti visus",
     "Paused": "Pristabdyta",
-    "Periodic scan every": "Periodinis nuskaitymas kas",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodinis nuskaitymas nurodytu intervalu ir išjungtas pakeitimų stebėjimas",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodinis nuskaitymas nurodytu intervalu ir įjungtas pakeitimų stebėjimas",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodinis nuskaitymas nurodytu intervalu ir nepavykęs nustatyti pakeitimų stebėjimas, bandoma iš naujo kas 1 min.:",
     "Please consult the release notes before performing a major upgrade.": "Peržvelkite laidos informaciją prieš atlikdami stambų atnaujinimą.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Prašome nustatymų dialoge nustatyti valdymo skydelio vartotojo vardą ir slaptažodį.",
     "Please wait": "Prašome palaukti",

gui/default/assets/lang/lang-nb.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Enheten som sist endret elementet",
     "Devices": "Enheter",
     "Disabled": "Avskrudd",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Frakoblet",
     "Discovered": "Oppdaget",
     "Discovery": "Oppslag",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Redigerer {{path}}.",
     "Enable NAT traversal": "Slå på NAT-traversering",
     "Enable Relaying": "Aktiver reléforsendelse",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Skriv inn et ikke-negativt nummer (f.eks. \"2.35\") og velg en enhet. Prosenter er deler av total diskstørrelse.",
     "Enter a non-privileged port number (1024 - 65535).": "Skriv inn et ikke-priviligert portnummer (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Skriv inn kommaseparerte (\"tcp://ip:port\", \"tcp://host:port\") adresser, eller ordet \"dynamic\" for å gjøre automatisk oppslag i adressen.",
@@ -185,7 +188,9 @@
     "Pause": "Oppholde",
     "Pause All": "Sett alt på pause",
     "Paused": "Oppholdt",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Sjekk utgivelsesnotatene før en storoppgradering utføres.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Vennligst angi bruker og passord for GUI-autentisering i innstillingsvinduet.",
     "Please wait": "Vent",

gui/default/assets/lang/lang-nl.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Apparaat dat het item laatst gewijzigd heeft",
     "Devices": "Apparaten",
     "Disabled": "Uitgeschakeld",
-    "Disabled periodic scanning": "Periodiek scannen uitgeschakeld",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Niet verbonden",
     "Discovered": "Ontdekt",
     "Discovery": "Ontdekken",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Bezig met bewerken van {{path}}.",
     "Enable NAT traversal": "NAT traversal inschakelen",
     "Enable Relaying": "Doorsturen inschakelen",
+    "Enabled": "Ingeschakeld",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Voer een positief nummer in (bijv. \"2.35\") en selecteer een eenheid. Percentages zijn een onderdeel van de totale schijfgrootte.",
     "Enter a non-privileged port number (1024 - 65535).": "Voer een niet-geprivilegieerd poortnummer in (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Voer door komma's gescheiden (\"tcp://ip:port\", \"tcp://host:port\") adressen in of voer \"dynamisch\" in om automatische ontdekking van het adres uit te voeren.",
@@ -185,7 +188,9 @@
     "Pause": "Pauze",
     "Pause All": "Alles pauzeren",
     "Paused": "Gepauseerd",
-    "Periodic scan every": "Periodiek scannen elke",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Lees eerst de release notes voordat u een grote update uitvoert.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Stel een gebruikersnaam en wachtwoord in bij 'Instellingen'.",
     "Please wait": "Even geduld",

gui/default/assets/lang/lang-pl.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Urządzenia",
     "Disabled": "Wyłączone",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Rozłączony",
     "Discovered": "Odkryte",
     "Discovery": "Odnajdywanie",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Edytowanie {{path}}.",
     "Enable NAT traversal": "Włącz trawersowanie NAT",
     "Enable Relaying": "Włącz przekazywanie",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Wpisz nieujemną liczbę (np. \"2.35\") oraz wybierz jednostkę. Wartość procentowa odnosi się do rozmiaru całego dysku.",
     "Enter a non-privileged port number (1024 - 65535).": "Wpisz nieuprzywilejowany numer portu (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Wpisz oddzielone przecinkiem adresy (\"tcp://ip:port\", \"tcp://host:port\") lub \"dynamic\" by przeprowadzić automatyczne odnalezienie adresu.",
@@ -185,7 +188,9 @@
     "Pause": "Zatrzymaj",
     "Pause All": "Zatrzymaj wszystkie",
     "Paused": "Zatrzymany",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Zaleca się przeanalizowanie \"release notes\" przed przeprowadzeniem znaczącej aktualizacji.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ustaw proszę użytkownika i hasło dostępowe do GUI w Ustawieniach",
     "Please wait": "Proszę czekać",

gui/default/assets/lang/lang-pt-BR.json

@@ -1,5 +1,5 @@
 {
-    "A device with that ID is already added.": "Um dispositivo com esta ID já foi adicionado.",
+    "A device with that ID is already added.": "Um dispositivo com este ID já foi adicionado.",
     "A negative number of days doesn't make sense.": "Um número negativo de dias não faz sentido.",
     "A new major version may not be compatible with previous versions.": "Uma nova versão principal pode não ser compatível com versões anteriores.",
     "API Key": "Chave da API",
@@ -26,14 +26,14 @@
     "Anonymous Usage Reporting": "Relatórios anônimos de uso",
     "Anonymous usage report format has changed. Would you like to move to the new format?": "O formato do relatório anônimo de uso mudou. Gostaria de usar o formato novo?",
     "Any devices configured on an introducer device will be added to this device as well.": "Quaisquer dispositivos configurados em um apresentador também serão adicionados a este dispositivo.",
-    "Are you sure you want to remove device {%name%}?": "Are you sure you want to remove device {{name}}?",
-    "Are you sure you want to remove folder {%label%}?": "Are you sure you want to remove folder {{label}}?",
-    "Are you sure you want to restore {%count%} files?": "Are you sure you want to restore {{count}} files?",
-    "Auto Accept": "Auto Accept",
+    "Are you sure you want to remove device {%name%}?": "Tem certeza de que deseja remover o dispositivo {{name}}?",
+    "Are you sure you want to remove folder {%label%}?": "Tem certeza de que deseja remover a pasta {{name}}?",
+    "Are you sure you want to restore {%count%} files?": "Tem certeza de que deseja restaurar {{count}} arquivo(s)?",
+    "Auto Accept": "Aceitar automaticamente",
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "A atualização automática agora oferece a escolha entre versões estáveis e candidatas ao lançamento.",
     "Automatic upgrades": "Atualizações automáticas",
-    "Automatically create or share folders that this device advertises at the default path.": "Automatically create or share folders that this device advertises at the default path.",
-    "Available debug logging facilities:": "Available debug logging facilities:",
+    "Automatically create or share folders that this device advertises at the default path.": "Criar ou compartilhar automaticamente pastas que este dispositivo anuncia no caminho padrão.",
+    "Available debug logging facilities:": "Facilidades de depuração disponíveis:",
     "Be careful!": "Tenha cuidado!",
     "Bugs": "Erros",
     "CPU Utilization": "Uso de CPU",
@@ -47,31 +47,33 @@
     "Configured": "Configurado",
     "Connection Error": "Erro de conexão",
     "Connection Type": "Tipo da conexão",
-    "Connections": "Connections",
+    "Connections": "Conexões",
     "Copied from elsewhere": "Copiado de outro lugar",
     "Copied from original": "Copiado do original",
     "Copyright © 2014-2016 the following Contributors:": "Direitos reservados © 2014-2016 aos seguintes colaboradores:",
     "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 dos seguintes Colaboradores:",
     "Creating ignore patterns, overwriting an existing file at {%path%}.": "Criando filtros, sobrescrevendo o arquivo {{path}}.",
     "Danger!": "Perigo!",
-    "Debugging Facilities": "Debugging Facilities",
-    "Default Folder Path": "Default Folder Path",
+    "Debugging Facilities": "Facilidades de depuração",
+    "Default Folder Path": "Caminho padrão da pasta",
     "Deleted": "Apagado",
     "Device": "Dispositivo",
     "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Dispositivo \"{{name}}\" ({{device}} em {{address}}) quer se conectar. Adicionar novo dispositivo?",
     "Device ID": "ID do dispositivo",
     "Device Identification": "Identificação do dispositivo",
     "Device Name": "Nome do dispositivo",
-    "Device that last modified the item": "Device that last modified the item",
+    "Device that last modified the item": "Dispositivo que modificou o item pela última vez",
     "Devices": "Dispositivos",
     "Disabled": "Desabilitado",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Verificação periódica e verificação automática de mudanças desabilitadas",
+    "Disabled periodic scanning and enabled watching for changes": "Verificação periódica desabilitada. Verificação automática de mudanças habilitada.",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Verificação periódica desabilitada. Não foi possível configurar a verificação automática de mudanças, tentando novamente a cada 1 minuto:",
     "Disconnected": "Desconectado",
     "Discovered": "Descoberto",
     "Discovery": "Descoberta",
     "Discovery Failures": "Falhas na descoberta",
-    "Do not restore": "Do not restore",
-    "Do not restore all": "Do not restore all",
+    "Do not restore": "Não restaurar",
+    "Do not restore all": "Não restaurar nenhum",
     "Documentation": "Documentação",
     "Download Rate": "Velocidade de recepção",
     "Downloaded": "Recebido",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editando {{path}}.",
     "Enable NAT traversal": "Habilitar NAT",
     "Enable Relaying": "Habilitar retransmissão",
+    "Enabled": "Habilitado",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Insira um número não negativo (por exemplo, 2.35) e escolha uma unidade. Porcentagens são como parte do tamanho total do disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Insira um número de porta não privilegiada (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Insira endereços (\"tcp://ip:porta\", \"tcp://host:porta\") separados por vírgula ou \"dynamic\" para executar a descoberta automática do endereço.",
@@ -90,7 +93,7 @@
     "Error": "Erro",
     "External File Versioning": "Externo",
     "Failed Items": "Itens com falha",
-    "Failed to setup, retrying": "Failed to setup, retrying",
+    "Failed to setup, retrying": "Não foi possível configurar, tentando novamente",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Falhas na conexão a servidores IPv6 são esperadas caso não haja conectividade IPv6.",
     "File Pull Order": "Ordem de retirada do arquivo",
     "File Versioning": "Versionamento de arquivos",
@@ -101,8 +104,8 @@
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Os arquivos são renomeados com suas datas na pasta .stversions quando substituídos ou removidos pelo Syncthing.",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Os arquivos estão protegidos contra alterações feitas em outros dispositivos, mas alterações feitas neste dispositivo serão enviadas ao resto dos dispositivos.",
     "Filesystem Notifications": "Notificação do Sistema de Arquivos",
-    "Filter by date": "Filter by date",
-    "Filter by name": "Filter by name",
+    "Filter by date": "Filtrar por data",
+    "Filter by name": "Filtrar por nome",
     "Folder": "Pasta",
     "Folder ID": "ID da pasta",
     "Folder Label": "Rótulo da pasta",
@@ -115,7 +118,7 @@
     "GUI Listen Address": "Endereço de escuta da interface web",
     "GUI Listen Addresses": "Endereços de escuta da interface",
     "GUI Theme": "Tema da interface",
-    "General": "General",
+    "General": "Geral",
     "Generate": "Gerar",
     "Global Changes": "Alterações globais",
     "Global Discovery": "Descoberta global",
@@ -140,16 +143,16 @@
     "Latest Change": "Última mudança",
     "Learn more": "Saiba mais",
     "Listeners": "Escutadores",
-    "Loading data...": "Loading data...",
-    "Loading...": "Loading...",
+    "Loading data...": "Carregando dados...",
+    "Loading...": "Carregando",
     "Local Discovery": "Descoberta local",
     "Local State": "Estado local",
     "Local State (Total)": "Estado local (total)",
     "Log": "Log",
-    "Log tailing paused. Click here to continue.": "Log tailing paused. Click here to continue.",
+    "Log tailing paused. Click here to continue.": "Observação do log pausada. Clique aqui para continuar.",
     "Logs": "Logs",
     "Major Upgrade": "Atualização \"major\"",
-    "Mass actions": "Mass actions",
+    "Mass actions": "Ações em massa",
     "Master": "Mestre",
     "Maximum Age": "Idade máxima",
     "Metadata Only": "Somente metadados",
@@ -164,7 +167,7 @@
     "Newest First": "Mais novo primeiro",
     "No": "Não",
     "No File Versioning": "Desligado",
-    "No files will be deleted as a result of this operation.": "No files will be deleted as a result of this operation.",
+    "No files will be deleted as a result of this operation.": "Nenhum arquivo será apagado como resultado desta operação",
     "No upgrades": "Sem atualizações",
     "Normal": "Normal",
     "Notice": "Aviso",
@@ -179,13 +182,15 @@
     "Override Changes": "Sobrescrever alterações",
     "Path": "Caminho",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta na máquina local. Será criado caso não exista. O caractere til (~) pode ser usado como um atalho para",
-    "Path where new auto accepted folders will be created, as well as the default suggested path when adding new folders via the UI. Tilde character (~) expands to {%tilde%}.": "Path where new auto accepted folders will be created, as well as the default suggested path when adding new folders via the UI. Tilde character (~) expands to {{tilde}}.",
+    "Path where new auto accepted folders will be created, as well as the default suggested path when adding new folders via the UI. Tilde character (~) expands to {%tilde%}.": "Caminho onde novas pastas aceitas automaticamente serão criadas, bem como o caminho padrão sugerido na adição de novas pastas pela interface. O caractere til (~) é substituído por {{tilde}}.",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Caminho do diretório onde as versões são salvas (deixe em branco para que seja o diretório padrão .stversions dentro da pasta compartilhada). ",
     "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "O caminho onde as versões serão salvas (deixe vazio para usar a pasta padrão .stversions dentro desta pasta).",
     "Pause": "Pausar",
     "Pause All": "Pausar Todas",
     "Paused": "Em pausa",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Verificação periódica habilitada no intervalo escolhido. Verificação automática de mudanças desabilitada",
+    "Periodic scanning at given interval and enabled watching for changes": "Verificação periódica habilitada no intervalo escolhido. Verificação automática de mudanças habilitada",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Verificação periódica habilitada no intervalo escolhido. Não foi possível configurar a verificação automática de mudanças, tentando novamente a cada 1 minuto:",
     "Please consult the release notes before performing a major upgrade.": "Por favor, consulte as notas de lançamento antes de atualizar para uma versão \"major\".",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um nome de usuário e senha para acesso à interface web, nas configurações.",
     "Please wait": "Aguarde",
@@ -196,36 +201,36 @@
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
     "RAM Utilization": "Uso de RAM",
     "Random": "Aleatória",
-    "Recent Changes": "Mudanças Recentes",
+    "Recent Changes": "Mudanças recentes",
     "Reduced by ignore patterns": "Reduzido por filtros",
     "Release Notes": "Notas de lançamento",
     "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Versões candidatas ao lançamento possuem os recursos e correções mais recentes. Elas são similares às tradicionais versões quinzenais.",
     "Remote Devices": "Dispositivos remotos",
     "Remove": "Remover",
-    "Remove Device": "Remove Device",
+    "Remove Device": "Remover dispositivo",
     "Remove Folder": "Remover pasta",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Identificador obrigatório da pasta. Deve ser igual em todos os dispositivos do grupo.",
     "Rescan": "Verificar agora",
     "Rescan All": "Verificar todas",
     "Rescan Interval": "Intervalo entre verificações",
-    "Rescans": "Rescans",
+    "Rescans": "Verificações",
     "Restart": "Reiniciar",
     "Restart Needed": "É necessário reiniciar",
     "Restarting": "Reiniciando",
-    "Restore": "Restore",
-    "Restore Versions": "Restore Versions",
+    "Restore": "Restaurar",
+    "Restore Versions": "Restaurar versões",
     "Resume": "Resumir",
     "Resume All": "Resumir Todas",
     "Reused": "Reutilizado",
-    "Running": "Running",
+    "Running": "Rodando",
     "Save": "Salvar",
     "Scan Time Remaining": "Tempo de verificação restante",
     "Scanning": "Verificando",
     "See external versioner help for supported templated command line parameters.": "Consulte a ajuda sobre versionamento externo para modelos de parâmetros de linha de comando aceitos.",
     "See external versioning help for supported templated command line parameters.": "Consulte a ajuda sobre versionamento externo para modelos de parâmetros de linha de comando aceitos.",
     "Select a version": "Selecione uma versão",
-    "Select latest version": "Select latest version",
-    "Select oldest version": "Select oldest version",
+    "Select latest version": "Escolher a última versão",
+    "Select oldest version": "Escolher a versão mais antiga",
     "Select the devices to share this folder with.": "Selecione os dispositivos com os quais esta pasta será compartilhada.",
     "Select the folders to share with this device.": "Selecione as pastas a serem compartilhadas com este dispositivo.",
     "Send & Receive": "Envia e recebe",
@@ -246,9 +251,9 @@
     "Shutdown Complete": "Desligamento completado",
     "Simple File Versioning": "Simples",
     "Single level wildcard (matches within a directory only)": "Coringa de único nível (faz corresponder apenas dentro de uma pasta)",
-    "Size": "Size",
+    "Size": "Tamanho",
     "Smallest First": "Menor primeiro",
-    "Some items could not be restored:": "Some items could not be restored:",
+    "Some items could not be restored:": "Alguns itens não puderam ser restaurados:",
     "Source Code": "Código-fonte",
     "Stable releases and release candidates": "Versões estáveis e candidatas ao lançamento",
     "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Versões estáveis são lançadas aproximadamente a cada duas semanas. Durante esse tempo elas são testadas como candidatas.",
@@ -295,11 +300,11 @@
     "This is a major version upgrade.": "Esta é uma atualização para uma versão \"major\".",
     "This setting controls the free space required on the home (i.e., index database) disk.": "Este ajuste controla o espaço livre necessário no disco que contém o banco de dados do Syncthing.",
     "Time": "Hora",
-    "Time the item was last modified": "Time the item was last modified",
+    "Time the item was last modified": "Momento em que o item foi modificado pela última vez",
     "Trash Can File Versioning": "Lixeira",
     "Type": "Tipo",
-    "Unavailable": "Unavailable",
-    "Unavailable/Disabled by administrator or maintainer": "Unavailable/Disabled by administrator or maintainer",
+    "Unavailable": "Não disponível",
+    "Unavailable/Disabled by administrator or maintainer": "Não disponível ou desabilitado pelo administrador ou mantenedor",
     "Undecided (will prompt)": "Não tenho certeza (perguntar sempre)",
     "Unknown": "Desconhecida",
     "Unshared": "Não compartilhada",
@@ -314,7 +319,7 @@
     "Usage reporting is always enabled for candidate releases.": "O relatório de uso está sempre habilitado em versões candidatas ao lançamento",
     "Use HTTPS for GUI": "Usar HTTPS para a interface web",
     "Version": "Versão",
-    "Versions": "Versions",
+    "Versions": "Versões",
     "Versions Path": "Caminho do versionamento",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "As versões são automaticamente apagadas se elas são mais antigas do que a idade máxima ou excederem o número de arquivos permitido em um intervalo.",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Aviso: este caminho é o diretório pai da pasta \"{{otherFolder}}\".",

gui/default/assets/lang/lang-pt-PT.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Último dispositivo a modificar o item",
     "Devices": "Dispositivos",
     "Disabled": "Desactivado",
-    "Disabled periodic scanning": "Verificação periódica desactivada",
+    "Disabled periodic scanning and disabled watching for changes": "Verificação periódica desactivada e vigilância de alterações desactivada",
+    "Disabled periodic scanning and enabled watching for changes": "Verificação periódica desactivada e vigilância de alterações activada",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Verificação periódica desactivada e falha ao preparar a vigilância de alterações, tentando novamente a cada minuto:",
     "Disconnected": "Desconectado",
     "Discovered": "Descoberto",
     "Discovery": "Pesquisa",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editando {{path}}.",
     "Enable NAT traversal": "Activar travessia de NAT",
     "Enable Relaying": "Permitir retransmissão",
+    "Enabled": "Activada",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Escreva um número positivo (ex.: \"2.35\") e seleccione uma unidade. Percentagens são relativas ao tamanho total do disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Escreva um número de porto não-privilegiado (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduza endereços separados por vírgulas (\"tcp://ip:porto\", \"tcp://máquina:porto\") ou \"dynamic\" para detectar automaticamente os endereços.",
@@ -185,7 +188,9 @@
     "Pause": "Pausar",
     "Pause All": "Pausar todas",
     "Paused": "Em pausa",
-    "Periodic scan every": "Verificação periódica a cada",
+    "Periodic scanning at given interval and disabled watching for changes": "Verificação periódica num dado intervalo e vigilância de alterações desactivada",
+    "Periodic scanning at given interval and enabled watching for changes": "Verificação periódica num dado intervalo e vigilância de alterações activada",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Verificação periódica num dado intervalo e falha ao preparar a vigilância de alterações, tentando novamente a cada minuto:",
     "Please consult the release notes before performing a major upgrade.": "Consulte as notas de lançamento antes de fazer uma actualização importante.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um utilizador e senha de autenticação para a interface gráfica, nas configurações.",
     "Please wait": "Aguarde",

gui/default/assets/lang/lang-ru.json

@@ -26,9 +26,9 @@
     "Anonymous Usage Reporting": "Анонимный отчет об использовании",
     "Anonymous usage report format has changed. Would you like to move to the new format?": "Формат анонимных отчётов изменился. Вы хотите переключиться на новый формат?",
     "Any devices configured on an introducer device will be added to this device as well.": "Все устройства, подключённые к устройству-рекомендателю, будут добавлены к текущему устройству.",
-    "Are you sure you want to remove device {%name%}?": "Are you sure you want to remove device {{name}}?",
-    "Are you sure you want to remove folder {%label%}?": "Are you sure you want to remove folder {{label}}?",
-    "Are you sure you want to restore {%count%} files?": "Are you sure you want to restore {{count}} files?",
+    "Are you sure you want to remove device {%name%}?": "Вы уверены, что хотите удалить устройство {{name}}?",
+    "Are you sure you want to remove folder {%label%}?": "Вы уверены, что хотите удалить папку {{label}}?",
+    "Are you sure you want to restore {%count%} files?": "Вы уверены, что хотите восстановить {{count}} файлов?",
     "Auto Accept": "Auto Accept",
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Автоматическое обновление теперь предлагает выбор между стабильными выпусками и кандидатами в релизы.",
     "Automatic upgrades": "Автообновление",
@@ -65,12 +65,14 @@
     "Device that last modified the item": "Устройство, последним изменившее объект",
     "Devices": "Устройства",
     "Disabled": "Отключено",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Нет соединения",
     "Discovered": "Обнаружено",
     "Discovery": "Обнаружение",
     "Discovery Failures": "Ошибки обнаружения",
-    "Do not restore": "Do not restore",
+    "Do not restore": "Не восстанавливать",
     "Do not restore all": "Do not restore all",
     "Documentation": "Документация",
     "Download Rate": "Скорость загрузки",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Правка {{path}}.",
     "Enable NAT traversal": "Включить NAT traversal",
     "Enable Relaying": "Включить релеи",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Введите непривилегированный порт (1024—65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введите через запятую («tcp://ip:port», «tcp://host:port») адреса, либо «dynamic», чтобы выполнить автоматическое обнаружение адреса.",
@@ -101,8 +104,8 @@
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Файлы с временнОй меткой версии помещаются в папку .stversions при их замене или удалении Syncthing.",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Файлы защищены от изменений сделанных на других устройствах, но изменения сделанные на этом устройстве будут отправлены всему кластеру.",
     "Filesystem Notifications": "Уведомления файловой системы",
-    "Filter by date": "Filter by date",
-    "Filter by name": "Filter by name",
+    "Filter by date": "Отфильтровать по дате",
+    "Filter by name": "Отфильтровать по имени",
     "Folder": "Папка",
     "Folder ID": "ID папки",
     "Folder Label": "Ярлык папки",
@@ -164,7 +167,7 @@
     "Newest First": "Сначала новые",
     "No": "Нет",
     "No File Versioning": "Без управления версиями файлов",
-    "No files will be deleted as a result of this operation.": "No files will be deleted as a result of this operation.",
+    "No files will be deleted as a result of this operation.": "В результате этой операции никакие файлы не будут удалены",
     "No upgrades": "Нет обновлений",
     "Normal": "Нормально",
     "Notice": "Внимание",
@@ -185,7 +188,9 @@
     "Pause": "Пауза",
     "Pause All": "Приостановить все",
     "Paused": "Приостановлено",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Перед проведением обновления основной версии ознакомтесь, пожалуйста, с Замечаниями к версии",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Установите имя пользователя и пароль для интерфейса в настройках",
     "Please wait": "Пожалуйста, подождите",
@@ -212,20 +217,20 @@
     "Restart": "Перезапустить",
     "Restart Needed": "Требуется перезапуск",
     "Restarting": "Перезапуск",
-    "Restore": "Restore",
+    "Restore": "Восстановить",
     "Restore Versions": "Restore Versions",
     "Resume": "Возобновить",
     "Resume All": "Возобновить все",
     "Reused": "Повторно использовано",
-    "Running": "Running",
+    "Running": "Запущено",
     "Save": "Сохранить",
     "Scan Time Remaining": "Оставшееся время сканирования",
     "Scanning": "Сканирование",
     "See external versioner help for supported templated command line parameters.": "See external versioner help for supported templated command line parameters.",
     "See external versioning help for supported templated command line parameters.": "See external versioning help for supported templated command line parameters.",
     "Select a version": "Выберите версию",
-    "Select latest version": "Select latest version",
-    "Select oldest version": "Select oldest version",
+    "Select latest version": "Выбрать последнюю версию",
+    "Select oldest version": "Выбрать самую старую версию",
     "Select the devices to share this folder with.": "Выберите устройства, для которых будет доступна эта папка.",
     "Select the folders to share with this device.": "Выберите папки, которые будут доступны этому устройству.",
     "Send & Receive": "Отправить и получить",
@@ -314,7 +319,7 @@
     "Usage reporting is always enabled for candidate releases.": "Отправка отчётов об использовании всегда включена для кандидатов в релизы.",
     "Use HTTPS for GUI": "Использовать HTTPS для панели управления",
     "Version": "Версия",
-    "Versions": "Versions",
+    "Versions": "Версии",
     "Versions Path": "Путь к версиям",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версии удаляются автоматически, если они существуют дольше максимального срока или превышают разрешённое количество файлов за интервал.",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Внимание! Этот путь — родительская директория уже существующей папки «{{otherFolder}}».",

gui/default/assets/lang/lang-sk.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Zariadenie, ktoré naposledy pozmenilo položku",
     "Devices": "Zariadenia",
     "Disabled": "Odpojené",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Odpojené",
     "Discovered": "Zistené",
     "Discovery": "Zisťovanie",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Úprava {{path}}.",
     "Enable NAT traversal": "Povoliť priechod NAT",
     "Enable Relaying": "Povoliť prenosové uzly",
+    "Enabled": "Povolené",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Vložte kladné číslo (napr. \"2,35\") a zvoľte jednotku. Percentá sa zobrazujú ako časť celkovej veľkosti disku.",
     "Enter a non-privileged port number (1024 - 65535).": "Vložte číslo neprivilegovaného portu (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadaj čiarkou oddelené  (\"tcp://ip:port\", \"tcp://host:port\") adresy alebo \"dynamic\" na automatické zistenie adresy.",
@@ -185,7 +188,9 @@
     "Pause": "Pozastaviť",
     "Pause All": "Pozastaviť všetky",
     "Paused": "Pozastavené",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Pred spustením hlavnej aktualizácie si prosím prečítajte poznámky k vydaniu.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Zadajte prosím prihlasovanie meno a heslo v dialógovom okne nastavení.",
     "Please wait": "Prosím čakajte",

gui/default/assets/lang/lang-sv.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Enhet som senast ändrade objektet",
     "Devices": "Enheter",
     "Disabled": "Inaktiverad",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Frånkopplad",
     "Discovered": "Upptäckt",
     "Discovery": "Annonsering",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Redigerar {{path}}.",
     "Enable NAT traversal": "Aktivera NAT traversering",
     "Enable Relaying": "Aktivera vidarebefordra",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Ange ett icke-negativt antal (t.ex., \"2.35\") och välj en enhet. Procenttalen är som en del av den totala diskstorleken.",
     "Enter a non-privileged port number (1024 - 65535).": "Ange ett icke-privilegierat portnummer (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Ange kommaseparerade (\"tcp://ip:port\", \"tcp://host:port\")-adresser eller ordet \"dynamic\" för att använda automatisk uppslagning.",
@@ -185,7 +188,9 @@
     "Pause": "Paus",
     "Pause All": "Pausa alla",
     "Paused": "Pausad",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Läs igenom versionsnyheterna innan den stora uppgraderingen.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ställ in ett grafiska gränssnittets användarautentisering och lösenord i inställningsdialogrutan.",
     "Please wait": "Var god vänta",

gui/default/assets/lang/lang-tr.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Device that last modified the item",
     "Devices": "Aygıtlar",
     "Disabled": "Disabled",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "Bağlantı Kesik",
     "Discovered": "Keşfedildi",
     "Discovery": "Keşif",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Editing {{path}}.",
     "Enable NAT traversal": "NAT çaprazlamasına izin ver",
     "Enable Relaying": "Enable Relaying",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Adreslerin kendiliğinden keşfedilebilmesi için ya adresleri virgülle ayırarak  (\"tcp://ip:port\", \"tcp://host:port\") girin, ya da \"dynamic\" sözcüğünü girin.",
@@ -185,7 +188,9 @@
     "Pause": "Duraklat",
     "Pause All": "Tümünü Duraklat",
     "Paused": "Duraklatıldı",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Birincil bir yükseltme gerçekleştirmeden önce lütfen sürüm notlarını tetkik edin.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "GUI üzerinden Kimlik Doğrulaması yapmak için Ayarlar penceresinde Kullanıcı ve Parola tanımlayın lütfen.",
     "Please wait": "Lütfen Bekleyin",

gui/default/assets/lang/lang-uk.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "Пристрій, що останнім змінив елемент",
     "Devices": "Пристрої",
     "Disabled": "Вимкнено",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "Disabled periodic scanning and disabled watching for changes",
+    "Disabled periodic scanning and enabled watching for changes": "Disabled periodic scanning and enabled watching for changes",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:",
     "Disconnected": "З’єднання відсутнє",
     "Discovered": "Виявлено",
     "Discovery": "Сервери координації NAT",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "Редагування {{path}}.",
     "Enable NAT traversal": "Увімкнути NAT traversal",
     "Enable Relaying": "Увімкнути ретрансляцію (relaying)",
+    "Enabled": "Enabled",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Введіть невід'ємне число (напр. \"2.35\") та виберіть пристрій. Проценти від загального дискового простору.",
     "Enter a non-privileged port number (1024 - 65535).": "Введіть номер непривілейованого порту (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введіть розділені комою (\"tcp://ip:port\", \"tcp://host:port\") адреси або \"dynamic\" для автоматичного визначення адреси.",
@@ -185,7 +188,9 @@
     "Pause": "Пауза",
     "Pause All": "Призупинити все",
     "Paused": "Призупинено",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "Periodic scanning at given interval and disabled watching for changes",
+    "Periodic scanning at given interval and enabled watching for changes": "Periodic scanning at given interval and enabled watching for changes",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
     "Please consult the release notes before performing a major upgrade.": "Будь ласка перегляньте примітки до випуску перед мажорним оновленням. ",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Будь ласка, встановіть у налаштуваннях ім'я користувача та пароль до графічного інтерфейсу.",
     "Please wait": "Будь ласка, зачекайте",

gui/default/assets/lang/lang-zh-CN.json

@@ -65,7 +65,9 @@
     "Device that last modified the item": "最近修改该项的设备",
     "Devices": "设备",
     "Disabled": "已禁用",
-    "Disabled periodic scanning": "已禁用定期扫描",
+    "Disabled periodic scanning and disabled watching for changes": "已禁用定期扫描和更改监视",
+    "Disabled periodic scanning and enabled watching for changes": "已禁用定期扫描并启用更改监视",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "已禁用定期扫描但设置更改监视失败，正在以每 1m 一次重试：",
     "Disconnected": "连接已断开",
     "Discovered": "已发现",
     "Discovery": "设备发现",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "正在编辑 {{path}}。",
     "Enable NAT traversal": "启用 NAT 遍历",
     "Enable Relaying": "开启中继",
+    "Enabled": "已启用",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "输入一个非负数（例如“2.35”）并选择单位。%表示占磁盘总容量的百分比。",
     "Enter a non-privileged port number (1024 - 65535).": "输入一个非特权的端口号 (1024 - 65535)。",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "输入以半角逗号分隔的 (\"tcp://ip:port\", \"tcp://host:port\") 设备地址列表，或者输入 \"dynamic\" 以自动发现设备地址。",
@@ -185,7 +188,9 @@
     "Pause": "暂停",
     "Pause All": "全部暂停",
     "Paused": "已暂停",
-    "Periodic scan every": "定期扫描每",
+    "Periodic scanning at given interval and disabled watching for changes": "正以给定的间隔定期扫描并已禁用更改监视",
+    "Periodic scanning at given interval and enabled watching for changes": "正以给定的间隔定期扫描并已启用更改监视",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "正以给定的间隔定期扫描但设置更改监视失败，正在以每 1m 一次重试：",
     "Please consult the release notes before performing a major upgrade.": "请在进行重大更新前查看发布说明。",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "请在设置对话框中设置 GUI 验证用户及其密码。",
     "Please wait": "请稍候",

gui/default/assets/lang/lang-zh-TW.json

@@ -33,7 +33,7 @@
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "自動更新目前有穩定發行版及發行候選版可供選擇。",
     "Automatic upgrades": "自動升級",
     "Automatically create or share folders that this device advertises at the default path.": "自動在預設資料夾路徑建立或分享該裝置推薦的資料夾。",
-    "Available debug logging facilities:": "Available debug logging facilities:",
+    "Available debug logging facilities:": "可用的除錯日誌工具：",
     "Be careful!": "請小心！",
     "Bugs": "程式錯誤",
     "CPU Utilization": "CPU 使用",
@@ -65,7 +65,9 @@
     "Device that last modified the item": "前次修改裝置",
     "Devices": "裝置",
     "Disabled": "關閉",
-    "Disabled periodic scanning": "Disabled periodic scanning",
+    "Disabled periodic scanning and disabled watching for changes": "已關閉定期掃描及觀察變動",
+    "Disabled periodic scanning and enabled watching for changes": "已關閉定期掃描及啟用觀察變動",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "已關閉定期掃描，無法設定觀察變動，每 1 分鐘重試：",
     "Disconnected": "斷線",
     "Discovered": "已發現",
     "Discovery": "探索",
@@ -83,6 +85,7 @@
     "Editing {%path%}.": "正在編輯 {{path}} 。",
     "Enable NAT traversal": "啟用 NAT 穿透",
     "Enable Relaying": "啟用中繼",
+    "Enabled": "啟用",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "請輸入一非負數（如：\"2.35\"）並選擇一個單位。百分比表示佔用磁碟容量的大小。",
     "Enter a non-privileged port number (1024 - 65535).": "輸入一個非特權通訊埠號 (1024 - 65535)。",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號區隔的位址 (\"tcp://ip:port\", \"tcp://host:port\")，或輸入 \"dynamic\" 以進行位址的自動探索",
@@ -90,7 +93,7 @@
     "Error": "錯誤",
     "External File Versioning": "外部檔案版本控制",
     "Failed Items": "失敗的項目",
-    "Failed to setup, retrying": "Failed to setup, retrying",
+    "Failed to setup, retrying": "無法設定，正在重試",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "若未配置 IPv6，則無法連接 IPv6 伺服器係屬正常。",
     "File Pull Order": "提取檔案的順序",
     "File Versioning": "檔案版本控制",
@@ -185,7 +188,9 @@
     "Pause": "暫停",
     "Pause All": "全部暫停",
     "Paused": "暫停",
-    "Periodic scan every": "Periodic scan every",
+    "Periodic scanning at given interval and disabled watching for changes": "在一定的時間間隔，定期掃描及關閉觀察變動",
+    "Periodic scanning at given interval and enabled watching for changes": "在一定的時間間隔，定期掃描及啟用觀察變動",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "在一定的時間間隔，定期掃描，無法設定觀察變動，每 1 分鐘重試：",
     "Please consult the release notes before performing a major upgrade.": "執行重大升級前請先參閱版本資訊。",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "請在設定對話方塊內設置 GUI 使用者認證名稱及密碼。",
     "Please wait": "請稍後",
@@ -208,7 +213,7 @@
     "Rescan": "重新掃描",
     "Rescan All": "全部重新掃描",
     "Rescan Interval": "重新掃描間隔",
-    "Rescans": "Rescans",
+    "Rescans": "重新掃描",
     "Restart": "重新啟動",
     "Restart Needed": "需要重新啟動",
     "Restarting": "正在重新啟動",
@@ -217,7 +222,7 @@
     "Resume": "繼續",
     "Resume All": "全部繼續",
     "Reused": "重用",
-    "Running": "Running",
+    "Running": "正在執行",
     "Save": "儲存",
     "Scan Time Remaining": "剩餘掃描時間",
     "Scanning": "正在掃描",

man/stdiscosrv.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "STDISCOSRV" "1" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "STDISCOSRV" "1" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 stdiscosrv \- Syncthing Discovery Server
 .

man/strelaysrv.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "STRELAYSRV" "1" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "STRELAYSRV" "1" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 strelaysrv \- Syncthing Relay Server
 .

man/syncthing-bep.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-BEP" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-BEP" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-bep \- Block Exchange Protocol v1
 .

man/syncthing-config.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-CONFIG" "5" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .

man/syncthing-device-ids.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-DEVICE-IDS" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .

man/syncthing-event-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-EVENT-API" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .

man/syncthing-faq.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-FAQ" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .

man/syncthing-globaldisco.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-GLOBALDISCO" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-GLOBALDISCO" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-globaldisco \- Global Discovery Protocol v3
 .

man/syncthing-localdisco.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-LOCALDISCO" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-LOCALDISCO" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-localdisco \- Local Discovery Protocol v4
 .

man/syncthing-networking.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-NETWORKING" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .

man/syncthing-relay.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-RELAY" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-RELAY" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-relay \- Relay Protocol v1
 .

man/syncthing-rest-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-REST-API" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .

man/syncthing-security.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-SECURITY" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .

man/syncthing-stignore.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-STIGNORE" "5" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .

man/syncthing-versioning.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-VERSIONING" "7" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING-VERSIONING" "7" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing-versioning \- Keep automatic backups of deleted files by other nodes
 .

man/syncthing.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING" "1" "Feb 05, 2018" "v0.14" "Syncthing"
+.TH "SYNCTHING" "1" "Feb 11, 2018" "v0.14" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .