syncthing/man/syncthing-faq.7

660 lines
26 KiB
Groff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.\" Man page generated from reStructuredText.
.
.TH "SYNCTHING-FAQ" "7" "Mar 27, 2021" "v1" "Syncthing"
.SH NAME
syncthing-faq \- Frequently Asked Questions
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.INDENT 0.0
.IP \(bu 2
\fI\%General\fP
.INDENT 2.0
.IP \(bu 2
\fI\%What is Syncthing?\fP
.IP \(bu 2
\fI\%Is it “syncthing”, “Syncthing” or “SyncThing”?\fP
.IP \(bu 2
\fI\%What things are synced?\fP
.IP \(bu 2
\fI\%Is synchronization fast?\fP
.IP \(bu 2
\fI\%How does Syncthing differ from BitTorrent/Resilio Sync?\fP
.IP \(bu 2
\fI\%Why is there no iOS client?\fP
.IP \(bu 2
\fI\%Should I keep my device IDs secret?\fP
.UNINDENT
.IP \(bu 2
\fI\%Troubleshooting\fP
.INDENT 2.0
.IP \(bu 2
\fI\%Where are the Syncthing logs?\fP
.IP \(bu 2
\fI\%Why is the sync so slow?\fP
.IP \(bu 2
\fI\%Why does it use so much CPU?\fP
.IP \(bu 2
\fI\%Why is the setup more complicated than BitTorrent/Resilio Sync?\fP
.IP \(bu 2
\fI\%Why do I get “Host check error” in the GUI/API?\fP
.IP \(bu 2
\fI\%My Syncthing database is corrupt\fP
.IP \(bu 2
\fI\%Why do I see Syncthing twice in task manager?\fP
.IP \(bu 2
\fI\%How can I view the history of changes?\fP
.IP \(bu 2
\fI\%Does the audit log contain every change?\fP
.IP \(bu 2
\fI\%Why does Syncthing connect to this unknown/suspicious address?\fP
.UNINDENT
.IP \(bu 2
\fI\%Usage\fP
.INDENT 2.0
.IP \(bu 2
\fI\%What if there is a conflict?\fP
.IP \(bu 2
\fI\%How do I serve a folder from a read only filesystem?\fP
.IP \(bu 2
\fI\%I really hate the .stfolder directory, can I remove it?\fP
.IP \(bu 2
\fI\%Am I able to nest shared folders in Syncthing?\fP
.IP \(bu 2
\fI\%How do I rename/move a synced folder?\fP
.IP \(bu 2
\fI\%How do I configure multiple users on a single machine?\fP
.IP \(bu 2
\fI\%Does Syncthing support syncing between folders on the same system?\fP
.IP \(bu 2
\fI\%When I do have two distinct Syncthing\-managed folders on two hosts, how does Syncthing handle moving files between them?\fP
.IP \(bu 2
\fI\%Is Syncthing my ideal backup application?\fP
.IP \(bu 2
\fI\%How can I exclude files with brackets ([]) in the name?\fP
.IP \(bu 2
\fI\%How do I access the web GUI from another computer?\fP
.IP \(bu 2
\fI\%I dont like the GUI or the theme. Can it be changed?\fP
.IP \(bu 2
\fI\%How do I upgrade Syncthing?\fP
.IP \(bu 2
\fI\%Where do I find the latest release?\fP
.IP \(bu 2
\fI\%How do I run Syncthing as a daemon process on Linux?\fP
.IP \(bu 2
\fI\%How do I increase the inotify limit to get my filesystem watcher to work?\fP
.IP \(bu 2
\fI\%How do I reset the GUI password?\fP
.UNINDENT
.UNINDENT
.SH GENERAL
.SS What is Syncthing?
.sp
Syncthing is an application that lets you synchronize your files across multiple
devices. This means the creation, modification or deletion of files on one
machine will automatically be replicated to your other devices. We believe your
data is your data alone and you deserve to choose where it is stored. Therefore
Syncthing does not upload your data to the cloud but exchanges your data across
your machines as soon as they are online at the same time.
.SS Is it “syncthing”, “Syncthing” or “SyncThing”?
.sp
Its \fBSyncthing\fP, although the command and source repository is spelled
\fBsyncthing\fP so it may be referred to in that way as well. Its definitely not
SyncThing, even though the abbreviation \fBst\fP is used in some
circumstances and file names.
.SS What things are synced?
.sp
The following things are \fIalways\fP synchronized:
.INDENT 0.0
.IP \(bu 2
File contents
.IP \(bu 2
File modification times
.UNINDENT
.sp
The following may be synchronized or not, depending:
.INDENT 0.0
.IP \(bu 2
File permissions (when supported by file system; on Windows only the
read only bit is synchronized)
.IP \(bu 2
Symbolic links (synced, except on Windows, but never followed)
.UNINDENT
.sp
The following are \fInot\fP synchronized;
.INDENT 0.0
.IP \(bu 2
File or directory owners and Groups (not preserved)
.IP \(bu 2
Directory modification times (not preserved)
.IP \(bu 2
Hard links and Windows directory junctions (followed, not preserved)
.IP \(bu 2
Extended attributes, resource forks (not preserved)
.IP \(bu 2
Windows, POSIX or NFS ACLs (not preserved)
.IP \(bu 2
Devices, FIFOs, and other specials (ignored)
.IP \(bu 2
Sparse file sparseness (will become sparse, when supported by the OS & filesystem)
.UNINDENT
.SS Is synchronization fast?
.sp
Syncthing segments files into pieces, called blocks, to transfer data from one
device to another. Therefore, multiple devices can share the synchronization
load, in a similar way to the torrent protocol. The more devices you have online,
the faster an additional device will receive the data
because small blocks will be fetched from all devices in parallel.
.sp
Syncthing handles renaming files and updating their metadata in an efficient
manner. This means that renaming a large file will not cause a retransmission of
that file. Additionally, appending data to existing large files should be
handled efficiently as well.
.sp
Temporary files are used to store partial data
downloaded from other devices. They are automatically removed whenever a file
transfer has been completed or after the configured amount of time which is set
in the configuration file (24 hours by default).
.SS How does Syncthing differ from BitTorrent/Resilio Sync?
.sp
The two are different and not related. Syncthing and BitTorrent/Resilio Sync accomplish
some of the same things, namely syncing files between two or more computers.
.sp
BitTorrent Sync, now called Resilio Sync, is a proprietary peer\-to\-peer file
synchronization tool available for Windows, Mac, Linux, Android, iOS, Windows
Phone, Amazon Kindle Fire and BSD. [1] Syncthing is an open source file
synchronization tool.
.sp
Syncthing uses an open and documented protocol, and likewise the security
mechanisms in use are well defined and visible in the source code. Resilio
Sync uses an undocumented, closed protocol with unknown security properties.
.IP [1] 5
\fI\%https://en.wikipedia.org/wiki/Resilio_Sync\fP
.SS Why is there no iOS client?
.sp
There is an alternative implementation of Syncthing (using the same network
protocol) called \fBfsync()\fP\&. There are no plans by the current Syncthing
team to support iOS in the foreseeable future, as the code required to do so
would be quite different from what Syncthing is today.
.SS Should I keep my device IDs secret?
.sp
No. The IDs are not sensitive. Given a device ID its possible to find the IP
address for that device, if global discovery is enabled on it. Knowing the device
ID doesnt help you actually establish a connection to that device or get a list
of files, etc.
.sp
For a connection to be established, both devices need to know about the others
device ID. Its not possible (in practice) to forge a device ID. (To forge a
device ID you need to create a TLS certificate with that specific SHA\-256 hash.
If you can do that, you can spoof any TLS certificate. The world is your
oyster!)
.sp
\fBSEE ALSO:\fP
.INDENT 0.0
.INDENT 3.5
device\-ids
.UNINDENT
.UNINDENT
.SH TROUBLESHOOTING
.SS Where are the Syncthing logs?
.sp
Syncthing logs to stdout by default. On Windows Syncthing by default also
creates \fBsyncthing.log\fP in Syncthings home directory (run \fBsyncthing
\-paths\fP to see where that is). The command line option \fB\-logfile\fP can be
used to specify a user\-defined logfile.
.sp
If youre running a process manager like systemd, check there. If youre
using a GUI wrapper integration, it may keep the logs for you.
.SS Why is the sync so slow?
.sp
When troubleshooting a slow sync, there are a number of things to check.
.sp
First of all, verify that you are not connected via a relay. In the “Remote
Devices” list on the right side of the GUI, double check that you see
“Address: <some address>” and \fInot\fP “Relay: <some address>”.
[image]
.sp
If you are connected via a relay, this is because a direct connection could
not be established. Double check and follow the suggestions in
firewall\-setup to enable direct connections.
.sp
Second, if one of the devices is a very low powered machine (a Raspberry Pi,
or a phone, or a NAS, or similar) you are likely constrained by the CPU on
that device. See the next question for reasons Syncthing likes a faster CPU.
.sp
Third, verify that the network connection is OK. Tools such as iperf or just
an Internet speed test can be used to verify the performance here.
.SS Why does it use so much CPU?
.INDENT 0.0
.IP 1. 3
When new or changed files are detected, or Syncthing starts for the
first time, your files are hashed using SHA\-256.
.IP 2. 3
Data that is sent over the network is compressed (optionally) and
encrypted (always). When receiving data it must be decrypted and then (if
compressed) decompressed.
.IP 3. 3
There is a certain amount of housekeeping that must be done to track the
current and available versions of each file in the index database.
.IP 4. 3
By default Syncthing uses periodic scanning every hour when watching for
changes or every minute if thats disabled to detect
file changes. This means checking every files modification time and
comparing it to the database. This can cause spikes of CPU usage for large
folders.
.UNINDENT
.sp
Hashing, compression and encryption cost CPU time. Also, using the GUI
causes a certain amount of extra CPU usage to calculate the summary data it
presents. Note however that once things are \fIin sync\fP CPU usage should be
negligible.
.sp
To minimize the impact of this, Syncthing attempts to lower the
process priority when starting up.
.sp
To further limit the amount of CPU used when syncing and scanning, set the
environment variable \fBGOMAXPROCS\fP to the maximum number of CPU cores
Syncthing should use at any given moment. For example, \fBGOMAXPROCS=2\fP on a
machine with four cores will limit Syncthing to no more than half the
systems CPU power.
.SS Why is the setup more complicated than BitTorrent/Resilio Sync?
.sp
Security over convenience. In Syncthing you have to setup both sides to
connect two devices. An attacker cant do much with a stolen device ID, because
you have to add the device on the other side too. You have better control
where your files are transferred.
.sp
This is an area that we are working to improve in the long term.
.SS Why do I get “Host check error” in the GUI/API?
.sp
Since version 0.14.6 Syncthing does an extra security check when the GUI/API
is bound to localhost \- namely that the browser is talking to localhost.
This protects against most forms of \fI\%DNS rebinding attack\fP <\fBhttps://en.wikipedia.org/wiki/DNS_rebinding\fP> against the GUI.
.sp
To pass this test, ensure that you are accessing the GUI using an URL that
begins with \fIhttp://localhost\fP, \fIhttp://127.0.0.1\fP or \fIhttp://[::1]\fP\&. HTTPS
is fine too, of course.
.sp
If you are using a proxy in front of Syncthing you may need to disable this
check, after ensuring that the proxy provides sufficient authentication to
protect against unauthorized access. Either:
.INDENT 0.0
.IP \(bu 2
Make sure the proxy sets a \fIHost\fP header containing \fIlocalhost\fP, or
.IP \(bu 2
Set \fIinsecureSkipHostcheck\fP in the advanced settings, or
.IP \(bu 2
Bind the GUI/API to a non\-localhost listen port.
.UNINDENT
.sp
In all cases, username/password authentication and HTTPS should be used.
.SS My Syncthing database is corrupt
.sp
This is almost always a result of bad RAM, storage device or other hardware.
When the index database is found to be corrupt Syncthing cannot operate and
will note this in the logs and exit. To overcome this delete the \fI\%database
folder\fP <\fBhttps://docs.syncthing.net/users/config.html#description\fP> inside
Syncthings home directory and re\-start Syncthing. It will then need to
perform a full re\-hashing of all shared folders. You should check your
system in case the underlying cause is indeed faulty hardware which may put
the system at risk of further data loss.
.SS Why do I see Syncthing twice in task manager?
.sp
One process manages the other, to capture logs and manage restarts. This
makes it easier to handle upgrades from within Syncthing itself, and also
ensures that we get a nice log file to help us narrow down the cause for
crashes and other bugs.
.SS How can I view the history of changes?
.sp
The web GUI contains a \fBGlobal Changes\fP button under the device list which
displays changes since the last (re)start of Syncthing. With the \fB\-audit\fP
option you can enable a persistent, detailed log of changes and most
activities, which contains a \fBJSON\fP formatted sequence of events in the
\fB~/.config/syncthing/audit\-_date_\-_time_.log\fP file.
.SS Does the audit log contain every change?
.sp
The audit log (and the \fBGlobal Changes\fP window) sees the changes that your
Syncthing sees. When Syncthing is continuously connected it usually sees every change
happening immediately and thus knows which node initiated the change.
When topology gets complex or when your node reconnects after some time offline,
Syncthing synchronises with its neighbours: It gets the latest synchronised state
from the neighbour, which is the \fIresult\fP of all the changes between the last
known state (before disconnect or network delay) and the current state at the
neighbour, and if there were updates, deletes, creates, conflicts, which were
overlapping we only see the \fIlatest change\fP for a given file or directory (and
the node where that latest change occurred). When we connect to multiple neighbours
Syncthing decides which neighbor has the latest state, or if the states conflict
it initiates the conflict resolution procedure, which in the end results in a consistent
up\-to\-date state with all the neighbours.
.SS Why does Syncthing connect to this unknown/suspicious address?
.sp
If you see outgoing connections to odd and unexpected addresses these are
most likely connections to relay servers\&. Relay servers
are run by volunteers all over the world. They usually listen on port 443 or
22067, though this is controlled by the user running it. You can compare the
address you are concernced about with \fI\%the current list of active relays\fP <\fBhttps://relays.syncthing.net\fP>\&. Relays do not and can not see the data
transmitted via them.
.SH USAGE
.SS What if there is a conflict?
.sp
\fBSEE ALSO:\fP
.INDENT 0.0
.INDENT 3.5
conflict\-handling
.UNINDENT
.UNINDENT
.SS How do I serve a folder from a read only filesystem?
.sp
Syncthing requires a “folder marker” to indicate that the folder is present
and healthy. By default this is a directory called \fB\&.stfolder\fP that is
created by Syncthing when the folder is added. If this folder cant be
created (you are serving files from a CD or something) you can instead set
the advanced config \fBMarker Name\fP to the name of some file or folder that
you know will always exist in the folder.
.SS I really hate the \fB\&.stfolder\fP directory, can I remove it?
.sp
See the previous question.
.SS Am I able to nest shared folders in Syncthing?
.sp
Sharing a folder that is within an already shared folder is possible, but it has
its caveats. What you must absolutely avoid are circular shares. This is just
one example, there may be other undesired effects. Nesting shared folders is not
supported, recommended or coded for, but it can be done successfully when you
know what youre doing \- you have been warned.
.SS How do I rename/move a synced folder?
.sp
Syncthing doesnt have a direct way to do this, as its potentially
dangerous to do so if youre not careful \- it may result in data loss if
something goes wrong during the move and is synchronized to your other
devices.
.sp
The easy way to rename or move a synced folder on the local system is to
remove the folder in the Syncthing UI, move it on disk, then re\-add it using
the new path.
.sp
Its best to do this when the folder is already in sync between your
devices, as it is otherwise unpredictable which changes will “win” after the
move. Changes made on other devices may be overwritten, or changes made
locally may be overwritten by those on other devices.
.sp
An alternative way is to shut down Syncthing, move the folder on disk (including
the \fB\&.stfolder\fP marker), edit the path directly in \fBconfig.xml\fP in the
configuration folder (see config) and then start Syncthing again.
.SS How do I configure multiple users on a single machine?
.sp
Each user should run their own Syncthing instance. Be aware that you might need
to configure listening ports such that they do not overlap (see config).
.SS Does Syncthing support syncing between folders on the same system?
.sp
No. Syncthing is not designed to sync locally and the overhead involved in
doing so using Syncthings method would be wasteful. There are better
programs to achieve this such as \fI\%rsync\fP <\fBhttps://rsync.samba.org/\fP> or
\fI\%Unison\fP <\fBhttps://www.cis.upenn.edu/~bcpierce/unison\fP>\&.
.SS When I do have two distinct Syncthing\-managed folders on two hosts, how does Syncthing handle moving files between them?
.sp
Syncthing does not specially handle this case, and most files most likely get
re\-downloaded.
.sp
In detail, the behavior depends on the scan order. If you have folder A and B,
and move files from A to B, if A gets scanned first, it will announce removal of
the files to others who will remove the files. As you rescan B, B will
announce addition of new files, and other peers will have nowhere to get
them from apart from re\-downloading them.
.sp
If B gets rescanned first, B will announce additions first, remote
peers will reconstruct the files (not rename, more like copy block by
block) from A, and then as A gets rescanned remove the files from A.
.sp
A workaround would be to copy first from A to B, rescan B, wait for B to
rebuild on remote ends, and then delete from A.
.SS Is Syncthing my ideal backup application?
.sp
No. Syncthing is not a great backup application because all changes to your
files (modifications, deletions, etc.) will be propagated to all your
devices. You can enable versioning, but we encourage the use of other tools
to keep your data safe from your (or our) mistakes.
.SS How can I exclude files with brackets (\fB[]\fP) in the name?
.sp
The patterns in .stignore are glob patterns, where brackets are used to
denote character ranges. That is, the pattern \fBq[abc]x\fP will match the
files \fBqax\fP, \fBqbx\fP and \fBqcx\fP\&.
.sp
To match an actual file \fIcalled\fP \fBq[abc]x\fP the pattern needs to “escape”
the brackets, like so: \fBq\e[abc\e]x\fP\&.
.sp
On Windows, escaping special characters is not supported as the \fB\e\fP
character is used as a path separator. On the other hand, special characters
such as \fB[\fP and \fB?\fP are not allowed in file names on Windows.
.SS How do I access the web GUI from another computer?
.sp
The default listening address is 127.0.0.1:8384, so you can only access the
GUI from the same machine. This is for security reasons. Change the \fBGUI
listen address\fP through the web UI from \fB127.0.0.1:8384\fP to
\fB0.0.0.0:8384\fP or change the config.xml:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
<gui enabled="true" tls="false">
<address>127.0.0.1:8384</address>
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
to
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
<gui enabled="true" tls="false">
<address>0.0.0.0:8384</address>
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Then the GUI is accessible from everywhere. You should set a password and
enable HTTPS with this configuration. You can do this from inside the GUI.
.sp
If both your computers are Unix\-like (Linux, Mac, etc.) you can also leave the
GUI settings at default and use an ssh port forward to access it. For
example,
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ ssh \-L 9090:127.0.0.1:8384 user@othercomputer.example.com
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
will log you into othercomputer.example.com, and present the \fIremote\fP
Syncthing GUI on \fI\%http://localhost:9090\fP on your \fIlocal\fP computer.
.sp
If you only want to access the remote gui and dont want the terminal
session, use this example,
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ ssh \-N \-L 9090:127.0.0.1:8384 user@othercomputer.example.com
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
If only your remote computer is Unix\-like,
you can still access it with ssh from Windows.
.sp
Under Windows 10 (64 bit) you can use the same ssh command if you install
the \fI\%Windows Subsystem for Linux\fP <\fBhttps://docs.microsoft.com/windows/wsl/install-win10\fP>\&.
.sp
Another Windows way to run ssh is to install \fI\%gow (Gnu On Windows)\fP <\fBhttps://github.com/bmatzelle/gow\fP>\&. The easiest way to install gow is with the \fI\%chocolatey\fP <\fBhttps://chocolatey.org/\fP> package manager.
.SS I dont like the GUI or the theme. Can it be changed?
.sp
You can change the theme in the settings. Syncthing ships with other themes
than the default.
.sp
If you want a custom theme or a completely different GUI, you can add your
own.
By default, Syncthing will look for a directory \fBgui\fP inside the Syncthing
home folder. To change the directory to look for themes, you need to set the
STGUIASSETS environment variable. To get the concrete directory, run
syncthing with the \fB\-paths\fP parameter. It will print all the relevant paths,
including the “GUI override directory”.
.sp
To add e.g. a red theme, you can create the file \fBred/assets/css/theme.css\fP
inside the GUI override directory to override the default CSS styles.
.sp
To create a whole new GUI, you should checkout the files at
\fI\%https://github.com/syncthing/syncthing/tree/main/gui/default\fP
to get an idea how to do that.
.SS How do I upgrade Syncthing?
.sp
If you use a package manager such as Debians apt\-get, you should upgrade
using the package manager. If you use the binary packages linked from
Syncthing.net, you can use Syncthing built in automatic upgrades.
.INDENT 0.0
.IP \(bu 2
If automatic upgrades is enabled (which is the default), Syncthing will
upgrade itself automatically within 24 hours of a new release.
.IP \(bu 2
The upgrade button appears in the web GUI when a new version has been
released. Pressing it will perform an upgrade.
.IP \(bu 2
To force an upgrade from the command line, run \fBsyncthing \-upgrade\fP\&.
.UNINDENT
.sp
Note that your system should have CA certificates installed which allow a
secure connection to GitHub (e.g. FreeBSD requires \fBsudo pkg install
ca_root_nss\fP). If \fBcurl\fP or \fBwget\fP works with normal HTTPS sites, then
so should Syncthing.
.SS Where do I find the latest release?
.sp
We release new versions through GitHub. The latest release is always found
\fI\%on the release page\fP <\fBhttps://github.com/syncthing/syncthing/releases/latest\fP>\&. Unfortunately
GitHub does not provide a single URL to automatically download the latest
version. We suggest to use the \fI\%GitHub API\fP <\fBhttps://api.github.com/repos/syncthing/syncthing/releases/latest\fP> and parsing
the JSON response.
.SS How do I run Syncthing as a daemon process on Linux?
.sp
If youre using systemd, runit, or upstart, we ship \fI\%example configurations\fP <\fBhttps://github.com/syncthing/syncthing/tree/main/etc\fP>\&.
.sp
If however youre not using one of these tools, you have a couple of options.
If your system has a tool called \fBstart\-stop\-daemon\fP installed (thats the name
of the command, not the package), look into the local documentation for that, it
will almost certainly cover 100% of what you want to do. If you dont have
\fBstart\-stop\-daemon\fP, there are a bunch of other software packages you could use
to do this. The most well known is called daemontools, and can be found in the
standard package repositories for almost every modern Linux distribution.
Other popular tools with similar functionality include S6 and the aforementioned
runit.
.SS How do I increase the inotify limit to get my filesystem watcher to work?
.sp
You are probably reading this because you encountered the following error with
the filesystem watcher on linux:
.INDENT 0.0
.INDENT 3.5
Failed to start filesystem watcher for folder yourLabel (yourID): failed to
setup inotify handler. Please increase inotify limits, see \fI\%https://docs.syncthing.net/users/faq.html#inotify\-limits\fP
.UNINDENT
.UNINDENT
.sp
Linux typically restricts the amount of watches per user (usually 8192). When
you have more directories you need to adjust that number.
.sp
On many Linux distributions you can run the following to fix it:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
echo "fs.inotify.max_user_watches=204800" | sudo tee \-a /etc/sysctl.conf
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
On Arch Linux and potentially others it is preferred to write this line into a
separate file, i.e. you should run:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
echo "fs.inotify.max_user_watches=204800" | sudo tee \-a /etc/sysctl.d/90\-override.conf
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
This only takes effect after a reboot. To adjust the limit immediately, run:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
sudo sh \-c \(aqecho 204800 > /proc/sys/fs/inotify/max_user_watches\(aq
.ft P
.fi
.UNINDENT
.UNINDENT
.SS How do I reset the GUI password?
.sp
If youve forgotten/lost the GUI password, you can remove it by deleting the \fB<user>\fP and \fB<password>\fP XML tags from the \fB<gui>\fP block in file \fBconfig.xml\fP\&. This should be done while Syncthing is not running. The location of the file depends on OS and is described in the configuration documentation.
.sp
For example, the two emphasized lines below would be removed from the file.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
<gui enabled="true" tls="false" debugging="false">
<address>127.0.0.1:8384</address>
<user>syncguy</user>
<password>$2a$10$s9wWHOQe...Cq7GPye69</password>
<apikey>9RCKohqCAyrj5RjpyZdR2wXmQ9PyQFeN</apikey>
<theme>default</theme>
</gui>
.ft P
.fi
.UNINDENT
.UNINDENT
.SH AUTHOR
The Syncthing Authors
.SH COPYRIGHT
2014-2019, The Syncthing Authors
.\" Generated by docutils manpage writer.
.