Tutorial for building tools using LibTooling and LibASTMatchers

This document is intended to show how to build a useful source-to-source translation tool based on Clang’s LibTooling. It is explicitly aimed at people who are new to Clang, so all you should need is a working knowledge of C++ and the command line.

In order to work on the compiler, you need some basic knowledge of the abstract syntax tree (AST). To this end, the reader is encouraged to skim the Introduction to the Clang AST

Step 0: Obtaining Clang

As Clang is part of the LLVM project, you’ll need to download LLVM’s source code first. Both Clang and LLVM are in the same git repository, under different directories. For further information, see the getting started guide.

cd ~/clang-llvm
git clone https://github.com/llvm/llvm-project.git

Next you need to obtain the CMake build system and Ninja build tool.

cd ~/clang-llvm
git clone https://github.com/martine/ninja.git
cd ninja
git checkout release
./bootstrap.py
sudo cp ninja /usr/bin/

cd ~/clang-llvm
git clone git://cmake.org/stage/cmake.git
cd cmake
git checkout next
./bootstrap
make
sudo make install

Okay. Now we’ll build Clang!

cd ~/clang-llvm
mkdir build && cd build
cmake -G Ninja ../llvm -DLLVM_ENABLE_PROJECTS="clang;clang-tools-extra" -DLLVM_BUILD_TESTS=ON  # Enable tests; default is off.
ninja
ninja check       # Test LLVM only.
ninja clang-test  # Test Clang only.
ninja install

And we’re live.

All of the tests should pass.

Finally, we want to set Clang as its own compiler.

cd ~/clang-llvm/build
ccmake ../llvm

The second command will bring up a GUI for configuring Clang. You need to set the entry for CMAKE_CXX_COMPILER. Press 't' to turn on advanced mode. Scroll down to CMAKE_CXX_COMPILER, and set it to /usr/bin/clang++, or wherever you installed it. Press 'c' to configure, then 'g' to generate CMake’s files.

Finally, run ninja one last time, and you’re done.

Step 1: Create a ClangTool

Now that we have enough background knowledge, it’s time to create the simplest productive ClangTool in existence: a syntax checker. While this already exists as clang-check, it’s important to understand what’s going on.

First, we’ll need to create a new directory for our tool and tell CMake that it exists. As this is not going to be a core clang tool, it will live in the clang-tools-extra repository.

cd ~/clang-llvm
mkdir clang-tools-extra/loop-convert
echo 'add_subdirectory(loop-convert)' >> clang-tools-extra/CMakeLists.txt
vim clang-tools-extra/loop-convert/CMakeLists.txt

CMakeLists.txt should have the following contents:

set(LLVM_LINK_COMPONENTS support)

add_clang_executable(loop-convert
  LoopConvert.cpp
  )
target_link_libraries(loop-convert
  PRIVATE
  clangAST
  clangASTMatchers
  clangBasic
  clangFrontend
  clangSerialization
  clangTooling
  )

With that done, Ninja will be able to compile our tool. Let’s give it something to compile! Put the following into clang-tools-extra/loop-convert/LoopConvert.cpp. A detailed explanation of why the different parts are needed can be found in the LibTooling documentation.

// Declares clang::SyntaxOnlyAction.
#include "clang/Frontend/FrontendActions.h"
#include "clang/Tooling/CommonOptionsParser.h"
#include "clang/Tooling/Tooling.h"
// Declares llvm::cl::extrahelp.
#include "llvm/Support/CommandLine.h"

using namespace clang::tooling;
using namespace llvm;

// Apply a custom category to all command-line options so that they are the
// only ones displayed.
static llvm::cl::OptionCategory MyToolCategory("my-tool options");

// CommonOptionsParser declares HelpMessage with a description of the common
// command-line options related to the compilation database and input files.
// It's nice to have this help message in all tools.
static cl::extrahelp CommonHelp(CommonOptionsParser::HelpMessage);

// A help message for this specific tool can be added afterwards.
static cl::extrahelp MoreHelp("\nMore help text...\n");

int main(int argc, const char **argv) {
  auto ExpectedParser = CommonOptionsParser::create(argc, argv, MyToolCategory);
  if (!ExpectedParser) {
    // Fail gracefully for unsupported options.
    llvm::errs() << ExpectedParser.takeError();
    return 1;
  }
  CommonOptionsParser& OptionsParser = ExpectedParser.get();
  ClangTool Tool(OptionsParser.getCompilations(),
                 OptionsParser.getSourcePathList());
  return Tool.run(newFrontendActionFactory<clang::SyntaxOnlyAction>().get());
}

And that’s it! You can compile our new tool by running ninja from the build directory.

cd ~/clang-llvm/build
ninja

You should now be able to run the syntax checker, which is located in ~/clang-llvm/build/bin, on any source file. Try it!

echo "int main() { return 0; }" > test.cpp
bin/loop-convert test.cpp --

Note the two dashes after we specify the source file. The additional options for the compiler are passed after the dashes rather than loading them from a compilation database - there just aren’t any options needed right now.

Intermezzo: Learn AST matcher basics

Clang recently introduced the ASTMatcher library to provide a simple, powerful, and concise way to describe specific patterns in the AST. Implemented as a DSL powered by macros and templates (see ASTMatchers.h if you’re curious), matchers offer the feel of algebraic data types common to functional programming languages.

For example, suppose you wanted to examine only binary operators. There is a matcher to do exactly that, conveniently named binaryOperator. I’ll give you one guess what this matcher does:

binaryOperator(hasOperatorName("+"), hasLHS(integerLiteral(equals(0))))

Shockingly, it will match against addition expressions whose left hand side is exactly the literal 0. It will not match against other forms of 0, such as '\0' or NULL, but it will match against macros that expand to 0. The matcher will also not match against calls to the overloaded operator '+', as there is a separate operatorCallExpr matcher to handle overloaded operators.

There are AST matchers to match all the different nodes of the AST, narrowing matchers to only match AST nodes fulfilling specific criteria, and traversal matchers to get from one kind of AST node to another. For a complete list of AST matchers, take a look at the AST Matcher References

All matcher that are nouns describe entities in the AST and can be bound, so that they can be referred to whenever a match is found. To do so, simply call the method bind on these matchers, e.g.:

variable(hasType(isInteger())).bind("intvar")

Step 2: Using AST matchers

Okay, on to using matchers for real. Let’s start by defining a matcher which will capture all for statements that define a new variable initialized to zero. Let’s start with matching all for loops:

forStmt()

Next, we want to specify that a single variable is declared in the first portion of the loop, so we can extend the matcher to

forStmt(hasLoopInit(declStmt(hasSingleDecl(varDecl()))))

Finally, we can add the condition that the variable is initialized to zero.

forStmt(hasLoopInit(declStmt(hasSingleDecl(varDecl(
  hasInitializer(integerLiteral(equals(0))))))))

It is fairly easy to read and understand the matcher definition (“match loops whose init portion declares a single variable which is initialized to the integer literal 0”), but deciding that every piece is necessary is more difficult. Note that this matcher will not match loops whose variables are initialized to '\0', 0.0, NULL, or any form of zero besides the integer 0.

The last step is giving the matcher a name and binding the ForStmt as we will want to do something with it:

StatementMatcher LoopMatcher =
  forStmt(hasLoopInit(declStmt(hasSingleDecl(varDecl(
    hasInitializer(integerLiteral(equals(0)))))))).bind("forLoop");

Once you have defined your matchers, you will need to add a little more scaffolding in order to run them. Matchers are paired with a MatchCallback and registered with a MatchFinder object, then run from a ClangTool. More code!

Add the following to LoopConvert.cpp:

#include "clang/ASTMatchers/ASTMatchers.h"
#include "clang/ASTMatchers/ASTMatchFinder.h"

using namespace clang;
using namespace clang::ast_matchers;

StatementMatcher LoopMatcher =
  forStmt(hasLoopInit(declStmt(hasSingleDecl(varDecl(
    hasInitializer(integerLiteral(equals(0)))))))).bind("forLoop");

class LoopPrinter : public MatchFinder::MatchCallback {
public :
  virtual void run(const MatchFinder::MatchResult &Result) {
    if (const ForStmt *FS = Result.Nodes.getNodeAs<clang::ForStmt>("forLoop"))
      FS->dump();
  }
};

And change main() to:

int main(int argc, const char **argv) {
  auto ExpectedParser = CommonOptionsParser::create(argc, argv, MyToolCategory);
  if (!ExpectedParser) {
    // Fail gracefully for unsupported options.
    llvm::errs() << ExpectedParser.takeError();
    return 1;
  }
  CommonOptionsParser& OptionsParser = ExpectedParser.get();
  ClangTool Tool(OptionsParser.getCompilations(),
                 OptionsParser.getSourcePathList());

  LoopPrinter Printer;
  MatchFinder Finder;
  Finder.addMatcher(LoopMatcher, &Printer);

  return Tool.run(newFrontendActionFactory(&Finder).get());
}

Now, you should be able to recompile and run the code to discover for loops. Create a new file with a few examples, and test out our new handiwork:

cd ~/clang-llvm/llvm/llvm_build/
ninja loop-convert
vim ~/test-files/simple-loops.cc
bin/loop-convert ~/test-files/simple-loops.cc

Step 3.5: More Complicated Matchers

Our simple matcher is capable of discovering for loops, but we would still need to filter out many more ourselves. We can do a good portion of the remaining work with some cleverly chosen matchers, but first we need to decide exactly which properties we want to allow.

How can we characterize for loops over arrays which would be eligible for translation to range-based syntax? Range based loops over arrays of size N that:

  • start at index 0

  • iterate consecutively

  • end at index N-1

We already check for (1), so all we need to add is a check to the loop’s condition to ensure that the loop’s index variable is compared against N and another check to ensure that the increment step just increments this same variable. The matcher for (2) is straightforward: require a pre- or post-increment of the same variable declared in the init portion.

Unfortunately, such a matcher is impossible to write. Matchers contain no logic for comparing two arbitrary AST nodes and determining whether or not they are equal, so the best we can do is matching more than we would like to allow, and punting extra comparisons to the callback.

In any case, we can start building this sub-matcher. We can require that the increment step be a unary increment like this:

hasIncrement(unaryOperator(hasOperatorName("++")))

Specifying what is incremented introduces another quirk of Clang’s AST: Usages of variables are represented as DeclRefExpr’s (“declaration reference expressions”) because they are expressions which refer to variable declarations. To find a unaryOperator that refers to a specific declaration, we can simply add a second condition to it:

hasIncrement(unaryOperator(
  hasOperatorName("++"),
  hasUnaryOperand(declRefExpr())))

Furthermore, we can restrict our matcher to only match if the incremented variable is an integer:

hasIncrement(unaryOperator(
  hasOperatorName("++"),
  hasUnaryOperand(declRefExpr(to(varDecl(hasType(isInteger())))))))

And the last step will be to attach an identifier to this variable, so that we can retrieve it in the callback:

hasIncrement(unaryOperator(
  hasOperatorName("++"),
  hasUnaryOperand(declRefExpr(to(
    varDecl(hasType(isInteger())).bind("incrementVariable"))))))

We can add this code to the definition of LoopMatcher and make sure that our program, outfitted with the new matcher, only prints out loops that declare a single variable initialized to zero and have an increment step consisting of a unary increment of some variable.

Now, we just need to add a matcher to check if the condition part of the for loop compares a variable against the size of the array. There is only one problem - we don’t know which array we’re iterating over without looking at the body of the loop! We are again restricted to approximating the result we want with matchers, filling in the details in the callback. So we start with:

hasCondition(binaryOperator(hasOperatorName("<")))

It makes sense to ensure that the left-hand side is a reference to a variable, and that the right-hand side has integer type.

hasCondition(binaryOperator(
  hasOperatorName("<"),
  hasLHS(declRefExpr(to(varDecl(hasType(isInteger()))))),
  hasRHS(expr(hasType(isInteger())))))

Why? Because it doesn’t work. Of the three loops provided in test-files/simple.cpp, zero of them have a matching condition. A quick look at the AST dump of the first for loop, produced by the previous iteration of loop-convert, shows us the answer:

(ForStmt 0x173b240
  (DeclStmt 0x173afc8
    0x173af50 "int i =
      (IntegerLiteral 0x173afa8 'int' 0)")
  <<>>
  (BinaryOperator 0x173b060 '_Bool' '<'
    (ImplicitCastExpr 0x173b030 'int'
      (DeclRefExpr 0x173afe0 'int' lvalue Var 0x173af50 'i' 'int'))
    (ImplicitCastExpr 0x173b048 'int'
      (DeclRefExpr 0x173b008 'const int' lvalue Var 0x170fa80 'N' 'const int')))
  (UnaryOperator 0x173b0b0 'int' lvalue prefix '++'
    (DeclRefExpr 0x173b088 'int' lvalue Var 0x173af50 'i' 'int'))
  (CompoundStatement ...

We already know that the declaration and increments both match, or this loop wouldn’t have been dumped. The culprit lies in the implicit cast applied to the first operand (i.e. the LHS) of the less-than operator, an L-value to R-value conversion applied to the expression referencing i. Thankfully, the matcher library offers a solution to this problem in the form of ignoringParenImpCasts, which instructs the matcher to ignore implicit casts and parentheses before continuing to match. Adjusting the condition operator will restore the desired match.

hasCondition(binaryOperator(
  hasOperatorName("<"),
  hasLHS(ignoringParenImpCasts(declRefExpr(
    to(varDecl(hasType(isInteger())))))),
  hasRHS(expr(hasType(isInteger())))))

After adding binds to the expressions we wished to capture and extracting the identifier strings into variables, we have array-step-2 completed.

Step 4: Retrieving Matched Nodes

So far, the matcher callback isn’t very interesting: it just dumps the loop’s AST. At some point, we will need to make changes to the input source code. Next, we’ll work on using the nodes we bound in the previous step.

The MatchFinder::run() callback takes a MatchFinder::MatchResult& as its parameter. We’re most interested in its Context and Nodes members. Clang uses the ASTContext class to represent contextual information about the AST, as the name implies, though the most functionally important detail is that several operations require an ASTContext* parameter. More immediately useful is the set of matched nodes, and how we retrieve them.

Since we bind three variables (identified by ConditionVarName, InitVarName, and IncrementVarName), we can obtain the matched nodes by using the getNodeAs() member function.

In LoopConvert.cpp add

#include "clang/AST/ASTContext.h"

Change LoopMatcher to

StatementMatcher LoopMatcher =
    forStmt(hasLoopInit(declStmt(
                hasSingleDecl(varDecl(hasInitializer(integerLiteral(equals(0))))
                                  .bind("initVarName")))),
            hasIncrement(unaryOperator(
                hasOperatorName("++"),
                hasUnaryOperand(declRefExpr(
                    to(varDecl(hasType(isInteger())).bind("incVarName")))))),
            hasCondition(binaryOperator(
                hasOperatorName("<"),
                hasLHS(ignoringParenImpCasts(declRefExpr(
                    to(varDecl(hasType(isInteger())).bind("condVarName"))))),
                hasRHS(expr(hasType(isInteger())))))).bind("forLoop");

And change LoopPrinter::run to

void LoopPrinter::run(const MatchFinder::MatchResult &Result) {
  ASTContext *Context = Result.Context;
  const ForStmt *FS = Result.Nodes.getNodeAs<ForStmt>("forLoop");
  // We do not want to convert header files!
  if (!FS || !Context->getSourceManager().isWrittenInMainFile(FS->getForLoc()))
    return;
  const VarDecl *IncVar = Result.Nodes.getNodeAs<VarDecl>("incVarName");
  const VarDecl *CondVar = Result.Nodes.getNodeAs<VarDecl>("condVarName");
  const VarDecl *InitVar = Result.Nodes.getNodeAs<VarDecl>("initVarName");

  if (!areSameVariable(IncVar, CondVar) || !areSameVariable(IncVar, InitVar))
    return;
  llvm::outs() << "Potential array-based loop discovered.\n";
}

Clang associates a VarDecl with each variable to represent the variable’s declaration. Since the “canonical” form of each declaration is unique by address, all we need to do is make sure neither ValueDecl (base class of VarDecl) is NULL and compare the canonical Decls.

static bool areSameVariable(const ValueDecl *First, const ValueDecl *Second) {
  return First && Second &&
         First->getCanonicalDecl() == Second->getCanonicalDecl();
}

If execution reaches the end of LoopPrinter::run(), we know that the loop shell looks like

for (int i= 0; i < expr(); ++i) { ... }

For now, we will just print a message explaining that we found a loop. The next section will deal with recursively traversing the AST to discover all changes needed.

As a side note, it’s not as trivial to test if two expressions are the same, though Clang has already done the hard work for us by providing a way to canonicalize expressions:

static bool areSameExpr(ASTContext *Context, const Expr *First,
                        const Expr *Second) {
  if (!First || !Second)
    return false;
  llvm::FoldingSetNodeID FirstID, SecondID;
  First->Profile(FirstID, *Context, true);
  Second->Profile(SecondID, *Context, true);
  return FirstID == SecondID;
}

This code relies on the comparison between two llvm::FoldingSetNodeIDs. As the documentation for Stmt::Profile() indicates, the Profile() member function builds a description of a node in the AST, based on its properties, along with those of its children. FoldingSetNodeID then serves as a hash we can use to compare expressions. We will need areSameExpr later. Before you run the new code on the additional loops added to test-files/simple.cpp, try to figure out which ones will be considered potentially convertible.