beae1dfe2e
Central calls to ioctl BLKGETSIZE
...
Instead of opencoding the same thing everywhere.
2006-12-14 17:32:57 +11:00
4a39c6f236
Check device is large enough before hot-add.
...
This improves quality of error message.
2006-12-14 17:32:49 +11:00
435d4ebb2e
Mdassemble improvements
...
From: Luca Berra <bluca@comedia.it>
- Fix a bug where mdassemble didn't close a filedescriptor and so couldn't assembele
stacked arrays.
- Allow mdassemble, when run a second time, to mark all arrays as writable.
This is useful if they are started read-only as is best at boot-time.
2006-10-16 15:26:53 +10:00
0430ed4868
Remove partitions from components of an md array
...
They do nothing but cause confusion.
2006-10-13 09:02:35 +10:00
7eae7080e2
Work around bug in --add handling for version-1 superblocks
...
In 2.6.17 (and prior), the dev_number is ignored when a device
is added to an active array. Rather the first free number is used.
So we work around this by making sure we use the first free
number for dev_number.
Description...
2006-06-26 12:26:09 +10:00
ab56093f3b
Get --stop to honour --quiet
...
And as a side effect, if --quiet isn't given, stopped devices are
reported.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-06-02 05:53:22 +00:00
4f589ad0c5
Just updaqte copyright dates and email address
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 05:25:11 +00:00
d8def61cfa
fix write mostly for add and re-add
...
The following patch makes it possible to tag a device as write-mostly on
--add and --re-add with a non-persistent superblock array. Previously,
this was not working.
Signed-Off-By: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Neil Brown <neilb@suse.de>
2006-04-03 00:11:51 +00:00
16c6fa807c
Create missing /dev files where needed.
...
Whenever we need a device file to open, if one cannot be found in /dev,
create a temporary one.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-28 06:26:53 +00:00
313176636e
Remove ident arg from getinfo_super;
...
Add a 'name' field to 'info' to compensate.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-27 04:34:38 +00:00
308e1801ba
Fix assembling of array with spares when verion-1 superblock is used.
...
As spared don't have a position in the raid array with verion-1 superblocks,
we need to handle them a bit differently.
Signed-off-by: Neil Brown <neilb@suse.de>
2005-09-12 05:23:11 +00:00
1bf4e2d962
Passes all tests, nearly ready for release.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-26 06:08:28 +00:00
34163fc7cf
Support internal bitmaps with format-1 superblocks.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-25 04:31:44 +00:00
fe80f49b6e
Assorted fixes
...
Support "--build"ing arrays with bitmaps.
hot-removal of bitmaps
--re-add of drives recently removed.
assorted extra tests
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-16 06:45:23 +00:00
dab6685f3d
Add 'quite' option and tidy up some tests.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-15 06:14:27 +00:00
dfd4d8ee42
Add write-behind support
...
Currently this includes
--write-behind to set level of write-behind supported
--write-mostly to flag devices as write-mostly.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-09 04:25:47 +00:00
f277ce3671
Assorted Fixes for multiple bugs.
...
Assemble would crash, or just not work.
A few other problem found by a new test-suite.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-04 04:41:12 +00:00
60d9a17455
Make hot-add work with v 1.0.1 superblocks
...
Just some carelessness
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-07-29 00:19:25 +00:00
f0da9e8fcf
Make sure we try hard enough to find a component device..
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-07-06 23:12:04 +00:00
91f068bf5c
Retry --stop --scan until all stoppable devices have been stopped
...
This is needed to reliably stop stacked arrays
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-14 06:32:18 +00:00
f5e166fee3
Support --grow --bitmap=internal
...
Adding a filebased bitmap is not yet supported, and
this code is still under development.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:03:46 +00:00
892debc820
Use ADD_NEW_DISK to hot-add to non-version-0 arrays
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:16:32 +00:00
0fbf459d0d
Fix embarassing bug in 1.10.0 which broke --add
...
Use a different variable to old result of open
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-04-11 00:20:03 +00:00
d7eaf49f65
Use O_EXCL when opening component devices to be assembled into an array
...
In 2.6, this will fail if the device is already in use, so we can detect this error
more easily.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-04-04 06:02:49 +00:00
0df46c2ad8
Change MAJOR() etc to major() etc
...
This allows for larger device number if glibc supports
it (requires 2.3.3).
Also fail before creating larger device number if glibc
support isn't present.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-04-04 05:16:13 +00:00
b5e6464503
mdadm-1.8.0
2004-11-01 04:49:34 +00:00
dd0781e505
mdadm-1.6.0
2004-06-04 12:03:19 +00:00
aa88f531b4
mdadm-1.3.0
2003-07-28 23:59:00 +00:00
b83d95f362
mdadm-0.8.2
2002-04-11 01:36:14 +00:00
c913b90e6d
mdadm-0.8.1
2002-04-05 22:00:28 +00:00
e0d1903663
mdadm-0.8
2002-04-04 01:58:32 +00:00
9a9dab3670
mdadm-0.7
2002-03-08 00:03:52 +00:00
cd29a5c835
mdctl-0.6
2002-03-06 23:17:40 +00:00
5282684628
mdctl-0.5
2001-08-23 02:33:20 +00:00
82b27616de
mdctl-v0.4
2001-07-26 07:00:09 +00:00
682c705194
mdctl-v0.3
2001-06-14 05:33:53 +00:00
64c4757e27
mdctl-v0.2
2001-06-08 02:36:23 +00:00
Neil Brown
Luca Berra