The --monitor -r option requires a parameter, otherwise a null pointer will be manipulated
when converting to integer data, and a coredump will appear.
Segmentation fault (core dumped)
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add optional EXTRAVERSION parameter to Makefile and allow to mark version
by user friendly label. It might be useful when creating custom
spins of mdadm, or labeling some instance in between major releases.
Signed-off-by: Tkaczyk Mariusz <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When people assemble a md raid device with a large number of
component deivces (e.g. 1500 DASD disks), the raid device detail
information generated by 'mdadm --detail --export $devnode' is very
large. It is because the detail information contains information of
all the component disks (even the missing/failed ones).
In such condition, when udev-md-raid-arrays.rules is triggered and
internally calls "mdadm --detail --no-devices --export $devnode",
user may observe systemd error message ""invalid message length". It
is because the following on-stack raw message buffer in systemd code
is not big enough,
systemd/src/libudev/libudev-monitor.c
_public_ struct udev_device *udev_monito ...
struct ucred *cred;
union {
struct udev_monitor_netlink_header nlh;
char raw[8192];
} buf;
Even change size of raw[] from 8KB to larger size, it may still be not
enough for detail message of a md raid device with much larger number of
component devices.
To fix this problem, an extra option '--no-devices' is added (the
original idea is proposed by Neil Brown). When printing detailed
information of a md raid device, if '--no-devices' is specified, then
all component devices information will not be printed, then the output
message size can be restricted to a small number, even with the systemd
only has 8KB on-disk raw buffer, the md raid array udev rules can work
correctly without failure message.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Extend the --consistency-policy parameter to work also in Grow mode.
Using it changes the currently active consistency policy in the kernel
driver and updates the metadata to make this change permanent. Currently
this supports only changing between "ppl" and "resync" policies, that is
enabling or disabling PPL at runtime.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Add a new parameter to mdadm: --consistency-policy=. It determines how
the array maintains consistency in case of unexpected shutdown. This
maps to the md sysfs attribute 'consistency_policy'. It can be used to
create a raid5 array using PPL. Add the necessary plumbing to pass this
option to metadata handlers. The write journal and bitmap
functionalities are treated as different policies, which are implicitly
selected when using --write-journal or --bitmap options.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Allow per-device "failfast" flag to be set when creating an
array or adding devices to an array.
When re-adding a device which had the failfast flag, it can be removed
using --nofailfast.
failfast status is printed in --detail and --examine output.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch tries recreates missing/faulty journal in mdadm.
Example:
./mdadm --fail /dev/md1 /dev/sdb2
mdadm: set /dev/sdb2 faulty in /dev/md1
./mdadm --stop /dev/md1
mdadm: stopped /dev/md1
./mdadm -A --scan --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md/1 has been started with 15 drives.
./mdadm --add-journal /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
This extends nodes option for assemble mode, make the num of
cluster node could be change by user.
Before that, it is necessary to ensure there are enough space
for those nodes, calc_bitmap_size is introduced to calculate
the bitmap size of each node.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
A clustered disk is added by the traditional --add sequence.
However, other nodes need to acknowledge that they can "see"
the device. This is done by --cluster-confirm:
--cluster-confirm SLOTNUM:/dev/whatever (if disk is found)
or
--cluster-confirm SLOTNUM:missing (if disk is not found)
The node initiating the --add, has the disk state tagged with
MD_DISK_CLUSTER_ADD and the one confirming tag the disk with
MD_DISK_CANDIDATE.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The home-cluster is stored in the bitmap super block of the
array. The device can be assembled on a cluster with the
cluster name same as the one recorded in the bitmap.
If home-cluster is not specified, this is auto-detected using
dlopen corosync cmap library.
neilb: allow code to compile when corosync-devel is not installed.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Specifies the maximum number of nodes in the cluster that may use
this device simultaneously. This is equivalent to the number of
bitmaps created in the internal superblock (patches to follow).
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes mdadm prints messages with wrong name "mdmon",
and vice versa.
This patch solves this problem by changing method of determining
process name.
Now "Name" will be set in const at start of a program,
previously was hardcoded as #define.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--add-spare is like --add, but a --re-add is never attempted.
So it is equivalent to two separate commands:
--zero-metadata
--add
Signed-off-by: NeilBrown <neilb@suse.de>
If being built from a git tree, use the version and date
information from the top commit rather than the hard-coded
values.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We still allow --offroot to be given - for compatibility with scripts
- but ignore it.
The whole point of --offroot is to get systemd to not auto-kill mdmon,
and we always want that.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--replace can be used to replace a device without completely failing
it. Once the replacement completes the device will be failed.
--with can indicate which of several spares to use.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
As we don't allow '-K' for '--zero-super' there is no point
using it internally. Just define a 'KillOpt' like with
other options.
Signed-off-by: NeilBrown <neilb@suse.de>
Both --detail and --monitor can report the names of member
devices on an array, and do so by searching /dev and finding
the shortest name that matches.
If
--prefer=foo
is given, they will instead prefer a name that contain /foo/.
So
mdadm --detail /dev/md0 --prefer=by-path
will list the component devices via their /dev/disk/by-path/xxx
names.
Signed-off-by: NeilBrown <neilb@suse.de>
Lukasz Florczak
Jes Sorensen
Wu Guanghao
Tkaczyk Mariusz
Coly Li
Zhilong Liu
Artur Paszkiewicz
Jes Sorensen
NeilBrown
Song Liu
Guoqing Jiang
Pawel Baldysiak
NeilBrown
Jes Sorensen
Maciej Naruszewicz