We need to check for a backup iff the data_offset has changed.
Testing against level==10 was an effective but short-sighted approach.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the smooth conversion of legacy 0.90 arrays
to 1.0 metadata.
Old metadata is likely to remain but will be ignored.
It can be removed with
mdadm --zero-superblock --metadata=0.90 /dev/whatever
Signed-off-by: NeilBrown <neilb@suse.de>
These need to be cast to uint32_t before being cast to 'long', else
sign extension doesn't happen on 64bit hosts.
And bitmap_offset is le32, not le64 !!
Signed-off-by: NeilBrown <neilb@suse.de>
It seems like a nice location, but it means that we cannot
decrease the data_offset during a reshape.
So put it just after the bitmap, leaving 32K.
Signed-off-by: NeilBrown <neilb@suse.de>
If space_after and space_before are zero (the default) then assume that
metadata doesn't support changing data_offset.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ these must allow for bad-block-list
2/ they must match the kernel, which has a 32k buffer after the
superblock.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We widely use a "devnum" which is 0 or +ve for md%d devices
and -ve for md_d%d devices.
But I want to be able to use md_%s device names.
So get rid of devnum (a number) and use devnm (a 32char string).
eg.
md0
md_d2
md_home
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 1e2b276535 (Report error in --update
string is not recognised) broke homehost updating functionality because it
depended on each string comparison being done even after we already found
a match. Make it work again by restructuring code.
Reported-by: (and original version by) Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Now that we use O_DIRECT for all device IO, BLKFLSBUF is not needed to
ensure we get current data, and it can impose a cost if any flush-out
is needed. So remove it.
To be safe, add O_DIRECT to one place where it isn't currently used:
when reading a bitmap.
Signed-off-by: NeilBrown <neilb@suse.de>
--detail needs to be read to report 2 devices in each slot,
and --examine need to report if the device is the original or
the replacement.
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm --create /dev/md0 .... /dev/sda1:1024 /dev/sdb1:2048 ...
The size is in K unless a suffix: K M G is given.
The suffix 's' means sectors.
Signed-off-by: NeilBrown <neilb@suse.de>
sometimes 0.1% isn't enough, though mostly only in testing.
We need one chunk for a successful reshape, so reserve 2.
Signed-off-by: NeilBrown <neilb@suse.de>
Some arrays (raid10) never need a backup file, so during assembly
we can avoid the whole Grow_continue check in that case.
Achieve this using a flag set by the metadata handler.
Also get "mdadm -I" to fail if a backup process would be
needed. It currently does fail as the kernel rejects things,
but it is nicer to have this explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
The 'new_offset' is used for reshaping to avoid the need
for a backup file.
For now we only report the value when it is set.
Signed-off-by: NeilBrown <neilb@suse.de>
This is currently only useful for 1.x metadata and will allow an
explicit --data-offset request on command line.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ When printing the "name=" entry for --brief output,
enclose name in quotes if it contains spaces etc.
Quotes are already supported for reading mdadm.conf
2/ When a name is used as a device name, translate spaces
and tabs to '_', as well as the current translation of
'/' to '-'.
Signed-off-by: NeilBrown <neilb@suse.de>
--update=bbl will add a bad block list to each device.
--update=no-bblk will remove the bad block list providing that it
is empty.
Signed-off-by: NeilBrown <neilb@suse.de>
An additional pair of key=value for --examine --export.
Signed-off-by: Maciej Naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If we change some functions to accept 'verbose', where <0 means to be
quiet, in place of 'quiet', then we will be able to merge
'quiet' and 'verbose' together for simplicity.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
In function write_init_super1():
If "rv = store_super1(st, di->fd)" return error and the di is the last.
Then the di = NULL && rv > 0, so exec:
if (rv)
fprintf(stderr, Name ": Failed to write metadata to%s\n",
di->devname);
will be segmentation fault.
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
While it is nice to set a high data_offset to leave plenty of head
room it is much more important to leave enough space to allow
of the data of the array.
So after we check that sb->size is still available, only reduce the
'reserved', don't increase it.
This fixes a bug where --adding a spare fails because it does not have
enough space in it.
Reported-by: nowhere <nowhere@hakkenden.ath.cx>
Signed-off-by: NeilBrown <neilb@suse.de>
fbdef49811 incorrectly tried to fix sign
extension of the bitmap offset. However mdinfo->bitmap_offset is a u32
and needs to be converted to a 32 bit signed integer before the sign
extension.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The kernel is growing the ability to avoid the need for a
backup file during reshape by being able to change the data offset.
For this to be useful we need plenty of free space before the
data so the data offset can be reduced.
So for v1.1 and v1.2 metadata make the default data_offset much
larger. Aim for 128Meg, but keep a power of 2 and don't use more
than 0.1% of each device.
Don't change v1.0 as that is used when the data_offset is required to
be zero.
Signed-off-by: NeilBrown <neilb@suse.de>
As the bitmap can be before the superblock, bitmap_offset is signed.
But some of the code didn't honour that :-(
Signed-off-by: NeilBrown <neilb@suse.de>
RAID10 arrays with an odd number of devices had the arraysize
reported wrongly by --examine due to a rounding error.
Reported-by: Chris Francy <zoredache@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This uses a struct to cache the block size for aligned reads/writes,
to avoid repeated ioctl(BLKSSZGET) calls.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Avoid possibly using stale data in bitmap and misc area of superblock.
In addition, remove superfluous memsets already covered by memset of
full superblock.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Use a #define rather than calculate the size of the superblock buffer
on every allocation.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We just calculated the pointer to the bitmap, so use it instead of
recalculating.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>