When reshape is broken it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On restart save checkpoint to store current position /probably farther/
that can be read from md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is broken, it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On reshape restart use md position as start position, if it is farther than
position specified in metadata. Opposite situation treat as error.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When chunk size migration occurs (e.g. 128k->4k) first checkpoint cannot
be set in md due to too small step. Correct migration record initialization
to allow whole copy area usage and increase migration checkpoint step.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Using takeover operation for grow purposes, mdadm has to be sure
that mdmon processes all updates, and if necessary it will be closed
at takeover to raid0 operation. If mdmon is late, next array in container
is processed and due to race condition mdmon closes itself instead to monitor
next reshape operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Problem was found during reshaping 2 volumes /raid0 and raid5/ in container.
Sometimes mdmon throws core dump due to NULL pointer exception.
Problem occurs in scenario:
- managemon: is about spare activation (degraded raid4 volume == raid0 under takeover)
- managemon: detect level change and signals monitor (manage_member() calls replace_array())
- monitor: detects transition raid4/5->raid0 and sets a->container to NULL
to indicate array deactivation
- managemon : continues his work and tries to activate spare (a->check_degraded is set).
NULL pointer is passed to metadata handler activate_spare()
Core dump is generated.
To resolve this situation managemon (after monitor kick) checks again
a->container pointer to learn if current array is not to be deactivated.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When added disk is disk added by expansion and this is last disk added
to array, assemble_container_content() will not even try to run such array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When during incremental assembly general migration is in progress,
starting degraded array causes that no more disks (even present)
can be added later as array is already started.
Request all previously present disks during general migration for assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When result from strchr() is NULL and it is assigned to subarray,
NULL pointer can be passed to strdup() function and coredump file
is generated.
Subarray is checked for NULL pointer, so it is assumed that it can
be NULL at this moment.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If we have to --force assembly during reshape, we need to
check by the 'before' and 'after' cases to make sure there
are enough devices.
Reported-by: Richard Herd <2001oddity@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It can easily be calculated from 'avail' and 'raid_disks', and we
will soon have a case where we don't have it easily available to pass
in.
Signed-off-by: NeilBrown <neilb@suse.de>
A recently change to write_bitmap1 meant awrite would sometimes
write from a non-aligned buffer which of course break.
So change awrite (and aread) to always use their own aligned
buffer to ensure safety.
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
when deciding whether the array is clean or dirty, compare
sb->resync_offset against MaxSector and not against sb->size
With RAID6 resyncing and subsequent drive failures, it is possible to
reach the case, in which sb->resync_offset==sb->size. This happens
when resync is aborted due to drive failures, and immediately a
rebuild of a spare starts. In this case, mdadm was considered the
array as clean, while kernel was considering the array as dirty. It is
better for mdadm also to consider the array as dirty in this case.
Signed-off-by: NeilBrown <neilb@suse.de>
Fix the case with creating an array with given container in command line
instead of real devices:
mdadm -CR /dev/md/raid0 -l 0 -n 2 -z5G /dev/md/imsm
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When --offroot is specified, mdadm will change the first character of
argv[0] to '@'. This is used to signal to systemd that mdadm was
launched from initramfs and should not be shut down before returning
to the initramfs.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This changes mdmon over to use getopt_long() for option parsing,
making it easier to add new options. In addition this patch introduces
a short version -t for --takeover and adds -h/--help.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
IMSM OROM limits number of volumes per controller. Volumes
above the limit are blocked in OROM. mdadm should follow OROM limitations
in this area. Therefore we need to count number of volumes on the devices
attached to SATA (ahci driver) or SAS (isci) controller. Adding a new volume
must be blocked if the number of volumes on devices attached to the given
controller is exceeded.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This option is going to be used to load and analyse the metadata from
devices. This is needed to count the number of volumes on devcies attached
to particular Intel controller (SATA or SAS). It shall be done without
activation of container and volumes on the devices.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Prepare function for subsequent changes related to
loading metadata from devices list.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When raid0 reshape is executed mdmon can dissappear due to raid level
takeover operation. If this happen before mdmon check, mdadm would treat
it as error condition. It is not true for this case.
Remove mdmon check from reshape_container() function.
Error condition check will remain using reshape_array() reentry test
for the same array (line 2577).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
External metadata sometimes is not updated.
It can be observed during 2 raid0 arrays Capacity Expansion.
New array size is not set, because metadata is not updated and on the reshape
end mdadm doesn't read new array size from metadata.
This happens when mdmon finishes his work (due to takeover to raid0),
before all metadata updates are processed.
Make sure that all updates are flushed to disk before executing takeover.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If there is no name provided for a container by the metadata it is
always appropriate to use the metadata version name. create_mddev
will still add a uniquifying digit to the end so there is little risk
of confusion.
This makes the --incremental code behave the same as the --assemble code.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The "char cnt [40]" buffer is sometimes too small to hold all message
- in such case monitor crashes.
The buffer must be larger to be able to hold all message.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If a 'remove' fails there is no certainty that another event will
happen soon, so make sure we retry soon anyway.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than just a number, use a named flag.
This makes the code easier to understand and allows room for returning
more flags later.
Signed-off-by: NeilBrown <neilb@suse.de>
Adding a bitmap via ioctl can only add it at a fixed location.
That location is not suitable for 4K-block devices.
So allow setting the bitmap location via sysfs if kernel supports it
and aim to always use 4K alignments.
Signed-off-by: NeilBrown <neilb@suse.de>
This is needed on 4K block devices such as DASD as we do O_DIRECT
reads.
Do the same alignment for gpt just to be safe.
Signed-off-by: NeilBrown <neilb@suse.de>
We need to send a "change" event just like we do when
creating an array.
This reverts commit 382afe49b1
The problem is that we need udev to create the file in /dev
for us.
It might be unnecessary for udev to consider assembling things
in this array, but it shouldn't cause a problem. If it did that
would be a different bug which we probably need locking to fix.
Or maybe udev shouldn't trigger a "-I" for containers appearing.
Signed-off-by: NeilBrown <neilb@suse.de>
We were adding 1, presumably to avoid div-by-zero possibilities.
It is better to only substitute '1' if the value actually is zero,
else for small numbers of bits the difference is visible.
Signed-off-by: NeilBrown <neilb@suse.de>
We need to check every disk to see if it has a particular amount of
space spare, not just every subsequent disk.
Signed-off-by: NeilBrown <neilb@suse.de>
Providing --no-sharing is given, monitoring should be permitted.
Unfortunately the kernel current rejects GET_DISK_INFO and
GET_ARRAY_INFO for non-privileged users which is unjustified.
The info is available in sysfs and we could get it from there,
but for now, require the kernel to be fixed.
Reported-by: Raphael Hertzog <hertzog@debian.org>
Signed-off-by: NeilBrown <neilb@suse.de>
When e.g. array name (an) is correct and it is the same as container name (cn),
file element creation /dev/md/an will replace /dev/md/cn.
This can cause that user cannot access container using /dev/md/cn.
Verify during array creation if chosen name is not already existing
one.
[Changed to use map_by_name() rather than stat() to determine prior
existence - NeilBrown]
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The value in info->array.raid_disks is the total number of
devices, which is the 'after' number when the number is increasing,
and the 'before' number when the number is decreasing.
The code currently assumes it is always the 'after' number - so fix
that.
Signed-off-by: NeilBrown <neilb@suse.de>
When an array is being reshaped to fewer data devices the relationship
between sync_max and reshape_progress is different to when the number
of devices increases - we need to allow for that when setting
sync_max/sync_min.
Signed-off-by: NeilBrown <neilb@suse.de>
In this test we stop and restart an array that is being recovered,
and we do that several times. Sometimes it completes the recovery
before we expect and test results are wrong.
So slow it down a bit more.
Signed-off-by: NeilBrown <neilb@suse.de>
The printed messages should be more appropriate and understandable
for user. If maxsize is equal 0, this means there is no free space left
on device. If size is greater than maxsize, this means there is not enough
space to create a new volume of given size.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Make test for all sub arrays having the same number of devices
dependant on the option ROM requirements being checked.
08imsm-overlap disables the OROM check but then fails because this
test causes it to.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek
NeilBrown
Alexander Lyakas
Labun, Marcin
Jes Sorensen
Lukasz Dorau
Williams, Dan J