GET_MISMATCH option doesn't exist for containers so sysfs_read fails if
this information is requested. Set options according to the device using
information from /proc/mdstat.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
mdadm uses smaller exit codes like 0,1,2,3,4.
Using ERANGE is inconsistent and not helpful.
So change it to a more consistent number.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If no bitmap is present, then the test
if (__le32_to_cpu(bsb->nodes) > 1)
accesses uninitialised memory. So move that test inside
a test for a bitmap being present.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
${DEVLINKS}
is not valid udev syntax, and is passed through uninterpreted.
$env{DEVLINKS}
or
%e{DEVLINKS}
is correct.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add "\n" to the end of error messages which don't already
have one. Also spell "opened" correctly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When RAID10 loses 2 disks and it is still operational, it cannot be
rebuilt. The rebuild process starts for the first disk and completes,
however completion is not recorded in metadata. There is an assumption
that rebuild completion corresponds to transition from degraded to
normal state. It's not the case for 2-disk RAID10 as it's still degraded
after rebuild to first disk completes.
Check if disk rebuild flag is set in the second map and clear it. So far it
has been checked only in the first map (where it was not set). The flag in
the second map has not been cleared but rebuild completion dropped second
map so the problem was not visible.
If rebuild completion is notified and array still has failed disks and is in
degraded state, check first if rebuild position is really unset (the same
check as for array in normal state). If so, mark migration as done but don't
change array state (it should remain degraded). Update failed disk number.
On rebuild start don't clear the rebuild flag in the destination map for all
the drives because failed state is lost for one of them. Just do a copy of
a map and clear the flag in the destination map for the disk that goes into
rebuild. Similarily preserve the rebuild flag in the map during disk removal.
If the disk is missing on array start and migration has been in progress,
don't just cancel it. Check first if maybe one of the disks was not under
rebuild (rebuild flag present both in source and destination map). If so,
rebuild was running despite of failed disk so there is no need to cancel
migration.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
The check for inactive array is incorrect as it compares it against
active array. Introduce a new function md_is_array_active so the check
is consistent across the code.
As the output contains list of disks in the array include this
information in sysfs read.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
For cluster scenario, add device is different with native raid.
When a node issues adds a device, then the node will broadcast
a message with UUID to other nodes in the cluster. If receiving
node can find the device with the specific UUID, it must confirm
the device, otherwise reports it is missing.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Currently, --add-journal can be only used to recreate broken journal
for arrays with journal since creation. As the kernel code getting
more mature, this constraint is no longer necessary.
This patch allows --add-journal to add journal to array without
journal.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Currently if metadata requires more then 1M,
data offset will be rounded down to closest MB.
This is not correct, since less then required space is reserved.
Always round data offset up to multiple of 1M.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If symlink (e.g. /dev/md/raid) is passed as a parameter to mdadm --wait,
it fails as it's not able to find a corresponding entry in /proc/mdstat
output. Get parameter file major:minor and look for block device name in
sysfs. This commit is partial revert of commit 9e04ac1c43
("mdadm/util: unify stat checking blkdev into function").
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If test mode has set as '--dev=disk', then users can specify
the argument of "--disks" to test a bunch of physical devices.
For example: ./test --dev=disk --disks=/dev/sda{2..15}
could execute all test cases on physical devices.
Currently, the --dev=disk mode would confilct with testdev()
in current test cases, thus ignore testing testdev() if has
set --dev=disk mode.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
It supports to specify the argument of "--raidtype"
to run the different raid level cases. Details refer
to the do_help() usage.
For example: ./test --raidtype=raid1
could execute all the raid1 test cases under tests/.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Adding functions:
die()
uniform the abnormal situations that have to abort.
check_env()
do various basic checking before running test suite.
save_log()
collect array infos, include of dmesg, superblock,
bitmap and /proc/mdstat.
main()
the core function of this script.
Improve functions:
cleanup()
clear dmesg and remove the /var/tmp/mdtest* files.
mdadm()
clear superblock once creating or building arrays
every time, because it's always creating arrays
many times in a test case.
check()
just tidy up with die(), didn't change code meanings.
testdev()
add checking $1 must be a block device, add 'return 0'
in final because this function exists in last line of
test case, such as tests/05r6tor0.
do_test()
add checking abnormal dmesg and changing log management.
do_help()
just recommend a better way to print Usage.
parse_args()
revamp and improve.
Delete function:
fast_sync()
It's no longer used, so get rid of it.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
In case to make codes neat, this commit didn't change
any codes, just tidy up and use Tab as code format.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Don't allow to enable PPL consistency policy when reshape is in progress.
Current PPL implementation doesn't work when reshape is taking place.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Don't allow array geometry change (size expand, disk adding) when PPL
consistency policy is enabled. Current PPL implementation doesn't work when
reshape is taking place.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Recent commit has changed the way failed disks are counted. It breaks
recovery for external metadata arrays as failed disks are not part of
the array and have no corresponding entries is sysfs (they are only
reported for containers) so degraded arrays show no failed disks.
Recent commit overwrites GET_DEGRADED result prior to GET_STATE and it
is not set again if GET_STATE has not been requested. As GET_STATE
provides the same information as GET_DEGRADED, the latter is not needed
anymore. Remove GET_DEGRADED option and replace it with GET_STATE
option.
Don't count number of failed disks looking at sysfs entries but
calculate it at the end. Do it only for arrays as containers report
no disks, just spares.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
It is a partial revert of commit 758b327cf5 ("Grow: Remove unnecessary
optimization"). For native metadata component size is set in kernel for
entire disk space. As external metadata supports multiple arrays within
one disk, the component size is set to array size. If component size is
not updated prior to array size update, the grow operation fails.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
START_ARRAY is no longer used in the code, so get rid of it.
MD commit: fbedac04fa11 ("[PATCH] md: the scheduled removal
of the START_ARRAY ioctl for md") merged in the year 2006.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
The value of sb->max_dev will always be increased by 1 when adding
a new disk in linear array. It causes an inconsistence between each
disk in the array and the "Array State" value of "mdadm --examine DISK"
is wrong. For example, when adding the first new disk into linear array
it will be:
Array State : RAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
('A' == active, '.' == missing, 'R' == replacing)
Adding the second disk into linear array it will be
Array State : .AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
('A' == active, '.' == missing, 'R' == replacing)
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When GET_ARRAY_INFO ioctl is successful, mdadm exits with an error.
It breaks udev and no links in /dev/md are created.
Also change debug print to error print in the message indicating lack
of the link to facilitate debugging similar issues in the future.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
refer to commit: e6e5f8f126 ("Build: Stop
bothering about supporting md driver ...")
continue to retire the APIs that md driver
wasn't supported for very long period of time.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
"Array Size" and "Per Dev Size" are incorrect for disks with sector size
different than 512B.
Calculate "Array Size" and "Per Dev Size" based on sector size. Additionally
print "Sector Size".
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
This leaves working_disks and utime missing before we can eliminate
check_array()'s call to md_get_array_info()
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add sector size as new spare selection criterion. Assume that 0 means
there is no requirement for the sector size in the array. Skip disks
with unsuitable sector size when looking for a spare to move across
containers.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Disks can be moved across containers in order to be used as a spare
drive for reubild. At the moment the only requirement checked for such
disk is its size (if it matches donor expectations). In order to
introduce more criteria rename corresponding superswitch method to more
generic name and move function parameter to a structure. This change is
a big edit but it doesn't introduce any changes in code logic, it just
updates function naming and parameters.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
As there is no support in IMSM for arrays including disks with different
sector sizes, don't allow to create such configuration. Also skip the
disk with unsuitable sector size when looking for spares in the same
container.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Allocate migration record buffer to support maximum sector size. Disk with
non-matching sector size is not going to be included in the array, however
some preparation/cleanup actions still take place on it and they would
cause a crash. Clear migration record using sector size of the disk (not
array) as they might not match.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
IMSM doesn't allow to create arrays including drives with different
sector sizes. The initial idea was not to permit to combine drives
with different sector size in the same container. The problem is it
only worked for array creation. On array assemble there are no
calls to metadata handlers to see if drive is suitable for a container
(e.g. as a spare) and it leads to wrong configuration.
Revert the change and allow adding drives with different sector size
to the container.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
"nroff" ("man") or ("tbl") needs a long page to avoid warnings
from "grotty", set 'pl' as 1000 to fix the following issue.
This command invokes by Makefile rule.
linux-tjrh:~/mdadm # man -l md.4 > test
grotty:<standard input> (<standard input>):5967:
character above first line discarded
... ...
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Mariusz Tkaczyk
NeilBrown
Tomasz Majchrzak
Guoqing Jiang
Song Liu
Pawel Baldysiak
Zhilong Liu
Lidong Zhong
Jes Sorensen
James Puthukattukaran
Maksymilian Kunt
Alexey Obitotskiy