mdadm assumes that blocks_per_member value is equal to num_data_stripes *
blocks_per_stripe but it is not true. For IMSM arrays created in OROM
NUM_BLOCKS_DIRTY_STRIPE_REGION sectors are added up to this value. Because
of this mdadm shows invalid size of arrays created in OROM and to fix this
we need to use array size calculation based on num data stripes and blocks
per stripe.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
In almost every place where imsm_num_data_members is called there is
already existing map so it can be used it to avoid mistake when specifying
map for imsm_num_data_members.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Due to compatibility to the newest OROM, imsm reserved space has to be
expanded to 4MB.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When assembling an array undergoing rebuild the kernel will switch to
resync if there are no ppl entries to recover. Prevent that by adding an
empty entry when validating the ppl header.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
This commit extends ab0c6bb ("imsm: update name in --detail-platform").
Refer user to RSTe/VROC manual when needed.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
For IMSM enterprise firmware starting with major version 6, present the
platform name as Intel VROC.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If RAID10 gets degraded during resync and is stopped, it doesn't continue
resync after automatic assemble and it is reported to be in sync. Resync
is blocked because the disk is missing. It should not happen for RAID10 as
it can still continue with 3 disks.
Count missing disks. Block resync only if number of missing disks exceeds
limit for given RAID level (only different for RAID10). Check if the
disk under recovery is present. If not, resync should be allowed to run.
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When RAID is created between VMD and SATA disks, printed message is
"Mixing devices attached to different VMD domains is not allowed". This message
is unclear and misleading because creating spanned containers between different
VMD domains is allowed. Set error message to more precise text.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If first disk of IMSM RAID1 is failed but still present in the system,
the array is not auto-assembled. Auto-assemble uses raid disk slot from
metadata to index disks. As it's not set, the valid disk is seen as a
replacement disk and its metadata is ignored. The problem is not
observed for other RAID levels as they have more than 2 disks -
replacement disks are only stored under uneven indexes so third disk
metadata is used in such scenario.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Reviewed-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When rebuild is initiated by the UEFI driver it is possible that the new
disk will not contain a valid ppl header. Just write the initial ppl
and don't abort assembly.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Use the first map to get the correct disk when rebuilding and not the
failed disk from the second map.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Set resync_start to 0 when starting a rebuilding array to make the
kernel perform ppl recovery before the rebuild.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If array was initially assembled with kernel without PPL support -
initial header was never written to the drive.
If initial resync was completed and system is rebooted to kernel with
PPL support - mdadm prevents from assembling normal clean array
due to lack of valid PPL.
Write empty header when assemble normal clean array, so the
its assamble is no longer blocked.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If validate_ppl_imsm() detects an invalid ppl header it will be
overwritten with a valid, empty ppl header. But if we are assembling an
array after unclean shutdown this will cause the kernel to skip resync
after ppl recovery. We don't want that because if there was an invalid
ppl it's best to assume that the ppl recovery is not enough to make the
array consistent and a full resync should be performed. So when
overwriting the invalid ppl add one ppl_header_entry with a wrong
checksum. This will prevent the kernel from skipping resync after ppl
recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
If user has array with single ppl -
update the metadata to use multiple ppls.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
PPL area should be cleared before creation/force assemble.
If the drive was used in other RAID array, it might contains PPL from it.
There is a risk that mdadm recognizes those PPLs and
refuses to assemble the RAID due to PPL conflict with created
array.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Change validation algorithm to check validity of multiple ppls that
are stored in PPL area.
If read error occurs during - treat the all PPLs as invalid -
there is no guarantee that this one was not latest. If the header CRC is
incorrect - assume that there are no further PPLs in PPL area.
If whole PPL area was written at least once - there is a possibility that
old PPL (with lower generation number) will follow the recent one
(with higest generation number). Compare those generation numbers to check
which PPL is latest.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add interpreting new rwh_policy bits. Set PPL size as 1MB.
If new array with ppl is created - use new implementation of ppl by
default.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Change the behavior of assemble and create for consistency-policy=ppl
for external metadata arrays. If the kernel does not support ppl, don't
abort but print a warning and start the array without ppl
(consistency-policy=resync). No change for native md arrays because the
kernel will not allow starting the array if it finds an unsupported
feature bit in the superblock.
In sysfs_add_disk() check consistency_policy in the mdinfo structure
that represents the array, not the disk and read the current consistency
policy from sysfs in mdmon's manage_member(). This is necessary to make
sysfs_add_disk() honor the actual consistency policy and not what is in
the metadata. Also remove all the places where consistency_policy is set
for a disk's mdinfo - it is a property of the array, not the disk.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add disk controller domain for nvme and vmd devices to prevent moving
spares between different domains.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When RAID10 loses 2 disks and it is still operational, it cannot be
rebuilt. The rebuild process starts for the first disk and completes,
however completion is not recorded in metadata. There is an assumption
that rebuild completion corresponds to transition from degraded to
normal state. It's not the case for 2-disk RAID10 as it's still degraded
after rebuild to first disk completes.
Check if disk rebuild flag is set in the second map and clear it. So far it
has been checked only in the first map (where it was not set). The flag in
the second map has not been cleared but rebuild completion dropped second
map so the problem was not visible.
If rebuild completion is notified and array still has failed disks and is in
degraded state, check first if rebuild position is really unset (the same
check as for array in normal state). If so, mark migration as done but don't
change array state (it should remain degraded). Update failed disk number.
On rebuild start don't clear the rebuild flag in the destination map for all
the drives because failed state is lost for one of them. Just do a copy of
a map and clear the flag in the destination map for the disk that goes into
rebuild. Similarily preserve the rebuild flag in the map during disk removal.
If the disk is missing on array start and migration has been in progress,
don't just cancel it. Check first if maybe one of the disks was not under
rebuild (rebuild flag present both in source and destination map). If so,
rebuild was running despite of failed disk so there is no need to cancel
migration.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
"Array Size" and "Per Dev Size" are incorrect for disks with sector size
different than 512B.
Calculate "Array Size" and "Per Dev Size" based on sector size. Additionally
print "Sector Size".
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Add sector size as new spare selection criterion. Assume that 0 means
there is no requirement for the sector size in the array. Skip disks
with unsuitable sector size when looking for a spare to move across
containers.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Disks can be moved across containers in order to be used as a spare
drive for reubild. At the moment the only requirement checked for such
disk is its size (if it matches donor expectations). In order to
introduce more criteria rename corresponding superswitch method to more
generic name and move function parameter to a structure. This change is
a big edit but it doesn't introduce any changes in code logic, it just
updates function naming and parameters.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
As there is no support in IMSM for arrays including disks with different
sector sizes, don't allow to create such configuration. Also skip the
disk with unsuitable sector size when looking for spares in the same
container.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Allocate migration record buffer to support maximum sector size. Disk with
non-matching sector size is not going to be included in the array, however
some preparation/cleanup actions still take place on it and they would
cause a crash. Clear migration record using sector size of the disk (not
array) as they might not match.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
IMSM doesn't allow to create arrays including drives with different
sector sizes. The initial idea was not to permit to combine drives
with different sector size in the same container. The problem is it
only worked for array creation. On array assemble there are no
calls to metadata handlers to see if drive is suitable for a container
(e.g. as a spare) and it leads to wrong configuration.
Revert the change and allow adding drives with different sector size
to the container.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
declare function stat_is_blkdev() to integrate repeated stat
checking blkdev operations, it returns 'true/1' when it is a
block device, and returns 'false/0' when it isn't.
The devname is necessary parameter, *rdev is optional, parse
the pointer of dev_t *rdev, if valid, assigned device number
to dev_t *rdev, if NULL, ignores.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
declare function fstat_is_blkdev() to integrate repeated fstat
checking block device operations, it returns true/1 when it is
a block device, and returns false/0 when it isn't.
The fd and devname are necessary parameters, *rdev is optional,
parse the pointer of dev_t *rdev, if valid, assigned the device
number to dev_t *rdev, if NULL, ignores.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
This field was not initialized so far. This ID needs to be unique
for every newly created array in container.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Use CONSISTENCY_POLICY_UNKNOWN instead. Simplify some checks because
since 5e8e35fb7e ("maps: Use keyvalue for null terminator to indicate
'unset' value") map_name() can return this default directly.
Suggested-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
mdassemble doesn't handle container based arrays, no support for sysfs,
etc. It has not been actively maintained for years, so time to send it
off to retirement.
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Array size is rounded to the nearest MB, however number of data stripes
and blocks per disk are calculated using size passed by the user. If
given size is not aligned, there is a mismatch. It's not possible to
assemble raid0 migrated to raid5 since raid5 arrays use number of data
stripes to calculate array size.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
This can be used with --assemble for super1 and with --update-subarray
for imsm to enable or disable PPL in the metadata.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Enable creating and assembling IMSM raid5 arrays with PPL. Update the
IMSM metadata format to include new fields used for PPL.
Add structures for PPL metadata. They are used also by super1 and shared
with the kernel, so put them in md_p.h.
Write the initial empty PPL header when creating an array. When
assembling an array with PPL, validate the PPL header and in case it is
not correct allow to overwrite it if --force was provided.
Write the PPL location and size for a device to the new rdev sysfs
attributes 'ppl_sector' and 'ppl_size'. Enable PPL in the kernel by
writing to 'consistency_policy' before the array is activated.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Show the currently enabled consistency policy in the output from
--detail. Add 3 spaces to all existing items in Detail output to align
with "Consistency Policy : ".
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Add a new parameter to mdadm: --consistency-policy=. It determines how
the array maintains consistency in case of unexpected shutdown. This
maps to the md sysfs attribute 'consistency_policy'. It can be used to
create a raid5 array using PPL. Add the necessary plumbing to pass this
option to metadata handlers. The write journal and bitmap
functionalities are treated as different policies, which are implicitly
selected when using --write-journal or --bitmap options.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Gcc reports it needs 19 bytes to right to disk->serial. Because the
type of argument i is int. But the meaning of i is failed disk
number. So it doesn't need to use 19 bytes. Just add a type
conversion to avoid this building error
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
In gcc7 there are some building errors like:
directive output may be truncated writing up to 31 bytes into a region of size 24
snprintf(str, MPB_SIG_LEN, %s, mpb->sig);
It just need to copy one string to target. So use strncpy to replace it.
For this line code: snprintf(str, MPB_SIG_LEN, %s, mpb->sig);
Because mpb->sig has the content of version after magic, so
it's better to use strncpy to replace snprintf too.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
If user tries to migrate from raid0 to raid5 and there is no spare
drive to perform it - mdadm will exit with errorcode, but
no error message is printed.
Print error instead of debug message when this condition occurs,
so user is informed why requested migration is not started.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Number of blocks used to calculate array size is based on 512 block size
so the size displayed is incorrect for arrays with 4k disks.
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
OROM defines maximum number of arrays supported. On array creation mdadm
checks if number of arrays doesn't exceed that limit, however it is not
calculated correctly for VMD now.
The current code performs a lookup of HBA using the id. VMD HBAs have
the same id so each lookup returns the same structure (first
encountered). Take a different approach for VMD HBAs. As id is not
unique and cannot be used for lookups, iterate over all VMD HBAs and
compare both id and HBA path.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Prior to this patch there was an error during compiling
on 32-bit arch. This patch fixes this issue.
Reported-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Enable bad block support for imsm metadata as commit e522751d605d
("seq_file: reset iterator to first record for zero offset") has been
accepted in upstream kernel. Prior to that patch mdmon had not been able
to read bad blocks sysfs file.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch prevents mdadm from updating metadata if migration is
not possible. The same check is done in analyse_change(),
but in that place - metadata is already modified.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
IMSM doesn't set 'events' field with generation number, so sometimes mdadm
tries to re-assembly container using metadata which isn't most recent (e. g.
from spare disk).
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds checking if platform (preOS) supports
non-Intel NVMe drives under VMD domain,
and - if so - allow creating IMSM Raid Volume
with those drives.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Implement "--examine-badblocks" command to provide list of bad blocks in
metadata for a disk.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Provide list of bad blocks using memory allocated in advance so it's
safe to call it from monitor.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If a disk fails or goes missing, clear the bad blocks associated with it
from metadata. If necessary, update disk ordinals.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Check for a duplicate first or try to merge it with existing bad block.
If block range exceeds BBM_LOG_MAX_LBA_ENTRY_VAL (256) blocks, it must
be split into multiple ranges. Fail if maximum number of bad blocks has
been already reached.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
On create set bad block support flag for each drive. On assmble also
provide a list of known bad blocks. Bad blocks are stored in metadata
per disk so they have to be checked against volume boundaries
beforehand.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Pre-allocate memory for largest possible bad block section when monitor
is being opened to avoid a need for memory allocation on metadata sync.
If memory for a structure has been allocated in mpb buffer but it hasn't
been used yet, it will be taken by next buffer grow, leading to
insufficient memory on metadata flush. Start tracking such memory and
take it into calculation when growing a buffer. Also assert has been
added to debug mode to warn when more metadata has been written than
memory allocated.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Always allocate memory for all log entries to avoid a need for memory
allocation when monitor requests to record a bad block.
Also some extra checks added to make static code analyzer happy.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds updataing num_data_stripes during reshape.
Previously this field once set during creation was never updated.
Also, num_data_strips value multipied by chunk_size is used
for set proper component size for RAID5.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Bad block support has incremented sysfs disk state reported by kernel
("external_bbl") so it became longer than 20 bytes. It causes reshape to
fail as it reads truncated entry from sysfs.
Increase buffer so it can accommodate the string including all state
values currently implemented in kernel at the same time.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Convert general migration record for 4Kn drives prior to write and post
read. Calculate record location based on sector size, don't just assume
it's 512. Assure buffer address is aligned to 4096 so write operation
avoids caching.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds support for drives with 4Kn sector size
for IMSM metadata. Mixing member drives with 4kn and 512
is not allowed. Some offsets were aligned with sector size.
Internal metadata representation and all calculations
are still based on 512-byte sector sizes. This
implementation converts only sector based values
when reading/writing to drive, because they needs to be
stored in metadata according to accual member drive sector size.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds retriving device sector size at startup
and set it in intel_super, so it can be used in other places.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds the warning message when x8-type device
is used with IMSM metadata. x8 device is a special
NVMe drive - two of them on a single PCIe card.
This card could be a single point of failure for
RAID levels different than RAID0. x8 devices have
serial number ending with "-A/-B" or "-1/-2".
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Migration record is only stored on disks in first and second metadata
slot. The function to load the record incorrectly passes disk slot as
disk index. If rebuilt has taken place for a container, disk slot
doesn't match disk index so it causes migration record to be read from a
disk it has not been written to. As a result reshape operation fails.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Chunk size change of RAID 10 array fails because it is not supported but
invalid values still are being written to metadata and array cannot be
assembled after stop. Operation should be blocked before metadata update.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The clang compiler complained about each of these.
The mdmon.h error will only affect 'far' RAID10 arrays using intel or DDF
metadata, and there is no such thing.
The mdopen.c will cause a problem if there are no free md device
numbers in the first 512. That is fairly unlikely.
The restripe.c error would only affect the 'test_stripe' command, and
probably doesn't change its behaviour.
The super-intel.c fix is purely cosmetic.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Don't rely on SCSI ioctl for reading NVMe serials - SCSI emulation for
NVMe devices can be disabled in the kernel config. Instead, try to get a
serial from /sys/block/nvme*/device/serial. If that fails for whatever
reason (i.e. no such attribute in old kernels) - fall back to the SCSI
method.
This also moves some SCSI-specific code from imsm_read_serial() to
scsi_get_serial().
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Fix the cases that produced messages like "mdadm: : The message".
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This fixes some issues when a member array is created with "missing"
devices in a container that has more devices than used in the member
array.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The sync_completed can be set to such values:
- two numbers of processed sectors and total during synchronization,
separated with '/';
- 'none' if synchronization process is stopped;
- 'delayed' if synchronization process is delayed.
Handle value of sync_completed not only as numbers but
also check for 'none' and 'delayed'.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
After resync is stopped sync_action value become 'idle'.
We treat this case as normal termination of waiting, not as error.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The sync_completed after restarting a reshape
(for example - after reboot) is set to "delayed" until
mdmon changes the state. Mdadm does not wait for that change with
old kernels. If this condition occurs - it exits and reshape
is not continuing. This patch adds retry of reading sync_complete
with a delay. It gives time for mdmon to change the "delayed" state.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
These are similar to stat2devnm() and fd2devnm() but not limited to md
devices. If the device is a partition they will return its kernel name,
not the whole device's name. For more information see commit:
8d83493 ("Introduce devid2kname - slightly different to devid2devnm.")
Also remove unsued declaration for fmt_devname().
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If sra == NULL we cannot goto abort, as it would result in calls to
sysfs_set_num() which would dereference sra.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch simplifies for() loop used in
ahci_enumerate_ports(). It makes it more readable.
Similar thing was done in b913501
({platform,super}-intel: Fix two resource leaks).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch reverts a0abe1e
(super-intel: Make print_found_intel_controllers() return void)
and make this function "return int" again.
Also, interpreting the return value is added.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The return value from print_found_intel_controllers() is never used,
so lets make it return void.
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The code did not free 'dir' allocated by opendir(). An additional
benefit is that this simplifies the for() loops.
Fixes: 60f0f54d ("IMSM: Add support for VMD")
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This adds a buffer size argument to load_sys(), rather than relying on
a hard coded buffer size. The old behavior was safe because we knew
the kernel would never return strings overrunning the buffers, however
it was ugly, and would cause code checking tools to spit out warnings.
This caused a Coverity warning over the read into
sra->sysfs_array_state which is only 20 bytes.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
A recent commit removed a call to abort_reshape() when IMSM reshape
completed. An unanticipated result of this is that the suspended
region is not cleared as it should be.
So after a reshape, a region of the array will cause all IO to block.
Re-instate the required updates to suspend_{lo,hi} coped from
abort_reshape().
This is caught (sometimes) by the test suite.
Also fix a couple of typos found while exploring the code.
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Fixes: 2139b03c20 ("imsm: don't call abort_reshape() in imsm_manage_reshape()")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Abort imsm_manage_reshape() without updating the migration record if any
error occurs when checking progress. If reshape is interrupted and the
migration record is then updated, the checkpoint will be wrong and will
cause reshape to fail when the array is restarted.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Waiting for reshape progress is done by using select() on sync_completed
to block until an exception condition is signalled on the
filedescriptor. This happens when the attribute's value is updated by
the kernel, but if the array is stopped when mdadm is blocked on
select() this will never happen, because this attribute is then removed
and apparently the kernel doesn't do sysfs_notify() when removing a
sysfs attribute. So set a 3 second timeout for the sysfs_wait() call.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
The Intel Volume Management Device (VMD) is an integrated
endpoint on the platform's PCIe root complex that acts
as a host bridge to a secondary PCIe domain.
This patch adds proper handling of NVMe devices attached to VMD domain.
Each VMD domain is treated as a separate controller (HBA).
Spanning between domains is forbidden.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
When reshape was interrupted, an incorrect checkpoint would be saved in
the migration record. Change wait_for_reshape_imsm() to return -1 when
sync_action is not "reshape" to abort early in imsm_manage_reshape()
without writing the migration record.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Calling abort_reshape() in imsm_manage_reshape() is unnecessary in case
of an error because it is handled by reshape_array(). Calling it when
reshape completes successfully is also unnecessary and leads to a race
condition:
- reshape ends
- mdadm calls abort_reshape() -> sets sync_action to idle
- MD_RECOVERY_INTR is set and md_reap_sync_thread() does not finish the
reshape
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Konrad Dabrowski <konrad.dabrowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
These both have the same value, and have done since the
'devnm' concept was introduced.
So discard the pointless duplicate.
Signed-off-by: NeilBrown <neilb@suse.de>
Active arrays with IMSM metadata are counted per hba so far.
This is bad due to new functionality of orom shared between multiple
controllers i.e. more arrays can be created than is supported by orom.
This patch changes the way of counting arrays, so the result will be
sum of arrays under every hba supported by specific orom.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Replaced oroms array with list, add_orom() now only appends to this list
and add_orom_device_id() only appends devid_list node to an orom_entry.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is best to keep strings all together so that they
are easier to search for in the source code.
If a string is so long that it looks ugly one line,
them maybe it should be broken into multiple lines
for display too.
Only strings which contain a newline can be broken
into multiple lines:
"It is OK to\n"
"break this string\n"
Signed-off-by: NeilBrown <neilb@suse.de>
make dprintf() print program name and __func__, so that
this messaging is consistent.
Also remove all __func__ messages from pr_err(). We shouldn't
leak that internal data in error message.
If we really want function name there, we new pr_XXX might
be wanted.
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes mdadm prints messages with wrong name "mdmon",
and vice versa.
This patch solves this problem by changing method of determining
process name.
Now "Name" will be set in const at start of a program,
previously was hardcoded as #define.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Migration record is not always cleared after successful migration. This can
block another reshape from being started. Migration will not be continued via
systemd service due to error in verifying reshape position. This patch added
clearing migration record when disk is added to container, and after successful
migration.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Mariusz Dabrowski
Artur Paszkiewicz
Michal Zylowski
Maksymilian Kunt
Mariusz Tkaczyk
Pawel Baldysiak
Tomasz Majchrzak
Jes Sorensen
Alexey Obitotskiy
Zhilong Liu
Xiao Ni
Jes Sorensen
NeilBrown
NeilBrown