This code was meant to update 'earliest' but clearly never doesn't.
This bug would only affect an array with a very large bitmap so it is unlikely
to be significant.
Signed-off-by: NeilBrown <neilb@suse.com>
glibc allows the addr arg to connect and socket to be any of a number
of 'sockaddr_*' types, but musl requires 'const struct sockaddr *'
which is in line with open group specs. So add casts to allow
compilation with musl.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
config.c uses _POSIX_C_SOURCE which is defined in features.h when
glibc/uclibc is used, but isn't defined when musl is used.
So provide a reasonable default.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
The check of "is there a filesystem here" is still appropriate for a
journal device.
Also set active_disks correctly - even though it is ignored.
Signed-off-by: NeilBrown <neilb@suse.com>
The careless change was introduce by 'commit 7e6e839a26
(mdadm: change the num of cluster node)'. Which should be
revert to avoid misunderstanding.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Abort imsm_manage_reshape() without updating the migration record if any
error occurs when checking progress. If reshape is interrupted and the
migration record is then updated, the checkpoint will be wrong and will
cause reshape to fail when the array is restarted.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Waiting for reshape progress is done by using select() on sync_completed
to block until an exception condition is signalled on the
filedescriptor. This happens when the attribute's value is updated by
the kernel, but if the array is stopped when mdadm is blocked on
select() this will never happen, because this attribute is then removed
and apparently the kernel doesn't do sysfs_notify() when removing a
sysfs attribute. So set a 3 second timeout for the sysfs_wait() call.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
The Intel Volume Management Device (VMD) is an integrated
endpoint on the platform's PCIe root complex that acts
as a host bridge to a secondary PCIe domain.
This patch adds proper handling of NVMe devices attached to VMD domain.
Each VMD domain is treated as a separate controller (HBA).
Spanning between domains is forbidden.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
When reshape was interrupted, an incorrect checkpoint would be saved in
the migration record. Change wait_for_reshape_imsm() to return -1 when
sync_action is not "reshape" to abort early in imsm_manage_reshape()
without writing the migration record.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Close fd2 as soon as it is no longer needed, before calling
Grow_continue(). Otherwise, we won't be able to stop an array with
external metadata during reshape, because mdadm running in background
will be keeping it open.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Now that we can print device details with a specific raid_disk but not
disk.number, the condition for "print either disk.number or disk.raid_disk"
must be make more specific.
Reported-by: Coly Li <colyli@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If reshape one raid device with bitmap to raid0, the reshape progress will
start. But it'll fail and lose some components. So it should remove bitmap
first.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
As we give journal device raid_disk of 0, the output of --detail is:
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
5 8 24 0 journal /dev/sdb8
1 8 18 1 active sync /dev/sdb2
2 8 19 2 active sync /dev/sdb3
3 8 21 3 active sync /dev/sdb5
4 8 23 - spare /dev/sdb7
This patch makes it back to:
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 18 1 active sync /dev/sdb2
2 8 19 2 active sync /dev/sdb3
3 8 21 3 active sync /dev/sdb5
4 8 23 - spare /dev/sdb7
5 8 24 - journal /dev/sdb8
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
This forcibly removed the bad-block log. There can be situations where it is hard to
remove bad blocks by writing to them - partiularly on RAID5.
Signed-off-by: NeilBrown <neilb@suse.com>
When a particular raid-disk is missing, we don't know which disk number
it should have, and reporting a number could result in duplicate
numbers (with v1.x metadata - never with the old 0.90).
So set the default to -1 and recoginise that when printing.
Signed-off-by: NeilBrown <neilb@suse.com>
Back in
Commit: 8057db46a1 ("Detail: fix handling of 'disks' array.")
when we doubled the size of the 'disks' array to handle primary and
replacement, we should have halved the setting of the default raid_disk
number.
Reported-by: Coly Li <colyli@suse.de>
Signed-off-by: NeilBrown <neilb@suse.com>
This commit does the following jobs:
1. rename is_clustered to dlm_funs_ready since it match the
function better.
2. st->cluster_name can't be use to identify the raid is a
clustered or not, we should check the bitmap's version to
perform the identification.
3. for cluster_get_dlmlock/cluster_release_dlmlock funcs, both
of them just need the lockid as parameter since the cluster
name can get by get_cluster_name().
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Since free_super1 actually doesn't change the sb, it
just free the addr space of sb. Also free_super1 is
called in lots of place within mdadm, so remove dlm
lock code since the func doesn't need the protection
and also reduce latency.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
"mdadm -X DISK" is used to report information about a bitmap
file, it is better to not display all the related infos if
bitmap is cleared with "--bitmap=none" under grow mode.
To do that, the locate_bitmap is changed a little to have a
return value based on MD_FEATURE_BITMAP_OFFSET.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
WHen change bitmap to none, the infos could be more accurate
based on existed bitmap type.
And s->bitmap_file is passed from cmd "--bitmap=TYPE", so
remove s->bitmap_file from err info since it should means
change the bitmap to one type failed rather than the type is
already presented.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
For cluster raid, the disc.state need to be changed accordingly under
incremental mode.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
This patch tries recreates missing/faulty journal in mdadm.
Example:
./mdadm --fail /dev/md1 /dev/sdb2
mdadm: set /dev/sdb2 faulty in /dev/md1
./mdadm --stop /dev/md1
mdadm: stopped /dev/md1
./mdadm -A --scan --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md/1 has been started with 15 drives.
./mdadm --add-journal /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Add sysfs_array_state to struct mdinfo, and add GET_ARRAY_STATE to
options of sysfs_read.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
32 bit signed timestamps will overflow in the year 2038.
Change the user interface mdu_array_info_s structure timestamps:
ctime and utime values used in ioctls GET_ARRAY_INFO and
SET_ARRAY_INFO to unsigned int. This will extend the field to last
until the year 2106.
Add time_after/time_before and supporting typecheck from
the kernel to take care of unsigned time wraparound.
The long term plan is to get rid of ctime and utime values in
this structure as this information can be read from the on-disk
meta data directly.
v0.90 on disk meta data uses u32 for maintaining time stamps.
So this will also last until year 2106.
Assumption is that the usage of v0.90 will be deprecated by
year 2106.
Timestamp fields in the on disk meta data for v1.0 version already
use 64 bit data types.
Signed-off-by: NeilBrown <neilb@suse.com>
In Assemble, getinfo_super() over-writes journal_clean. To
ensure correct journal_clean, keep it in a local variable
before getinfo_super().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
In kernel space, r5l checksum will use crc32c:
http://marc.info/?l=linux-raid&m=144598970529191
mdadm need to change too.
This patch ports a simplified crc32c algorithm from kernel code,
and used in super1.c:write_empty_r5l_meta_block();
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
As discussed, standalone require_journal() in struct superswitch
is not a very good idea. Instead, journal related information
fits well in struct mdinfo.
This patch simplifies journal support code in Assemble and
Incremental as:
- Add journal_device_required and journal_clean to struct mdinfo;
- Remove function require_journal from struct superswitch;
- Update Assemble and Incremental to use journal_device_required
and journal_clean from struct mdinfo (instead of separate var).
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Let libcmap lib and related funs also only need one-time
setup during mdadm running period.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Modifying an exiting device's superblock or creating a new superblock
on an existing device needs to be checked because the device could be
in use by another node in another array. So, we check this by taking
all superblock locks in userspace so that we don't step onto an active
device used by another node and safeguard against accidental edits.
After the edit is complete, we release all locks and the lockspace so
that it can be used by the kernel space.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If journal device is missing, do not start the array, and shows:
./mdadm -I /dev/sdf
mdadm: journal device is missing, not safe to start yet.
The array will be started when the journal device is attached with -I
./mdadm -I /dev/sdb1
mdadm: /dev/sdb1 attached to /dev/md/0_0, which has been started.
To force start without journal device:
./mdadm -I /dev/sdf --run
mdadm: Trying to run with missing journal device
mdadm: /dev/sdf attached to /dev/md/0_0, which has been started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Example output:
./mdadm --assemble /dev/md0 /dev/sd[c-f] /dev/sdb1
mdadm: /dev/md0 has been started with 4 drives and 1 journal.
mdadm checks superblock for journal devices. If the journal device
is missing or faulty, mdadm will show warning
./mdadm --assemble /dev/md0 /dev/sd[c-q] /dev/sdb1
mdadm: Not safe to assemble with missing or stale journal device, consider --force.
User can insist to start the array (read only) with --force
./mdadm --assemble /dev/md0 /dev/sd[c-q] /dev/sdb1 --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md0 has been started with 15 drives.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Replace special disk roles (0xffff, 0xfffe) with macros:
define MD_DISK_ROLE_SPARE 0xffff
define MD_DISK_ROLE_FAULTY 0xfffe
Will add macro for journal device in next patch:
define MD_DISK_ROLE_JOURNAL 0xfffd
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Calling abort_reshape() in imsm_manage_reshape() is unnecessary in case
of an error because it is handled by reshape_array(). Calling it when
reshape completes successfully is also unnecessary and leads to a race
condition:
- reshape ends
- mdadm calls abort_reshape() -> sets sync_action to idle
- MD_RECOVERY_INTR is set and md_reap_sync_thread() does not finish the
reshape
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Konrad Dabrowski <konrad.dabrowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If sysfs node existed, we should try to write "re-add" to it.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
NeilBrown
Guoqing Jiang
Khem Raj
Artur Paszkiewicz
Pawel Baldysiak
Xiao Ni
Song Liu
Deepa Dinamani
Constantine Shulyupin
Bas van Schaik