This allows a person to testing using loopback devices that don't
support serial number queries.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
>>
>> When I assemble an array I tend to have checked the devices before
>> hand; it would not be difficult to make the final pass a zeroing pass
>> if I knew I could vastly speed up post-assembly performance. As I
>> stated, it's merely a lack of clarity in the documentation.
>
> If you would like to create a patch against the man page, I would be happy to
> accept it.
>
> NeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
Unlike native md checkpointing some data about the geometry and type of
the migration process is coded into curr_migr_unit. Provide logic to
convert between md/{resync_start|recovery_start} and imsm/curr_migr_unit.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Minimal changes needed to permit reassembling partially recovered
external metadata arrays. The biggest logical change is that
->container_content() can now surface partially rebuilt members rather
than omitting them from the disk list.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace occurrences of ~0ULL to make it clear we are talking about maximal
resync/recovery position.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We don't need to sprinkle reads of this attribute all over the place,
just once at the entry of read_and_act(). Also, the mdinfo structure
for the array already has a 'resync_start' member, so just reuse that.
Finally, rename get_resync_start() to read_resync_start to make it
consistent with the other sysfs accessors in monitor.c.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When printing the migration state there is no need to print "migrating".
The fact that the state is non-idle should be enough indication.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
disk_list_get() can return NULL if:
1/ A formerly missing disk is re-added
2/ The original array has not been rebuilt, so the family number of the
missing disk still matches
3/ The metadata record of the in-sync disks are read before the missing
disk
This will result in the missing disk not adding its own serial number to
the disk_list, only its truncated value will be present.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When associating a spare take on the target's metadata version number to
satisfy future compare_super checks.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out the orom checking bits to validate_geometry_imsm_orom() and
share it between validate_geometry_imsm_volume() and the entry path to
reserve_space().
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The patch increases the capacity of buffers used to store
sysfs path names. Originally the buffers were too small to
hold the canonical representation of sysfs path (in case
of a SAS device, especially a device installed behind an
expander).
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure opened file descriptors are cleaned up
in the exit path when error occured.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Array index of 'path' may be out of bounds. Array
'path' of size 256 may use index value(s) 0..284.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Array index of 'device' may be out of bounds. Array 'device'
of size 40 may use index value(s) 0..43.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Possible memory leak. Dynamic memory stored in 'dev' and 'dev' allocated
through function 'malloc' can be lost on exit path.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Possible memory leak. Dynamic memory stored in 'sra' allocated through
function 'sysfs_read' at line 2484 can be lost at lines 2491, 2560 and
2571.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamic memory stored in 'devnum2devname(st->container_dev)' allocated
through function 'devnum2devname' at line 1274 is lost at line 1278.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'c' returned from call to function 'strchr' at line 954 may
be NULL and will be dereferenced at line 955.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'disk' returned from call to function '_get_imsm_disk' at line
700 may be NULL and will be dereferenced at line 710.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'st' returned from call to function 'malloc' at line 320 may
be NULL and it will be dereferenced at line 321.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
sysfs_add_disk() regenerates the name from major:minor, so we can drop a
strcpy that the static analysis checker does not like.
Reported-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Buffer overflow, array index of 'nm' may be out of bounds.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointers '_dev' and '_disk' returned from call to function '_get_imsm_dev'
and '_get_imsm_disk' may be NULL and will be dereferenced at lines
2933 and 2934, respectively.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suspicious dereference of pointer 'super' before NULL check at
line 3429.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure opened file descriptor is cleaned up on exit
path. Also make sure allocated memory for 'sra' is released
on exit path, too.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'this' returned from call to function 'malloc' at line 3795
may be NULL and will be dereferenced at line 3796.
Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Potential buffer overflow of 'link' caused by user input may occur,
due to non null-terminated string 'link'.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If a device is marked as faulty, then a re-add will cause it to be
added as a faulty drive, which is not what it wanted.
So just refuse to try to re-add a device which is marked 'faulty'.
Signed-off-by: NeilBrown <neilb@suse.de>
When creating an array, check if the devices have partition
tables and print a warning if the table or the partitions might be
destroyed by array creation.
Signed-off-by: NeilBrown <neilb@suse.de>
When -z is omitted reserve_space() looks to satisfy a zero length
allocation which lo and behold is equal to the amount of free space on a
full disk. So, catch maxsize == 0 and simplify the return value from
merge_extents() to always equal amount of free space (no benefit to
having a special case ~0ULL == error).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As array.size is 32bit we need to prefer the 'component_size'
read from sysfs when that is available.
Grow wasn't always suitably careful.
Signed-off-by: NeilBrown <neilb@suse.de>
array.size is only 32bit so it is not safe to multiply it
up before casting to (long long).
Actually, we shouldn't be using array.size here at all, but that
will get fixed in a subsequent patch.
Reported-by: Andrew Burgess <aab@cichlid.com>
Signed-off-by: NeilBrown <neilb@suse.de>
- When --kill-superblock is used with --metadata, find every
different superblock if there are several and kill them all.
- When creating a new array, kill off any old metadata. The code
to do this was already present but has become broken over time.
Signed-off-by: NeilBrown <neilb@suse.de>
As a some/most bootloaders don't understand md metadata, it might
be difficult to boot off an array with the default 1.0 metadata.
So if this is used for a RAID1, ask for confirmation.
Signed-Off-By: NeilBrown <neilb@suse.de>
As --add can destroy important data on a disk, and
--re-add is not suppose to, it is wrong to silently
try --add if --re-add fails.
So print a message and abort instead.
Signed-off-by: NeilBrown <neilb@suse.de>
->validate_geometry is called to validate overall parameters,
and to validate each individual device.
If it ever fails, it needs to report the reason, as common code
cannot possible know.
Signed-off-by: NeilBrown <neilb@suse.de>
A small bitmap-chunksize hurts performance without helping
resync speed much - particularly on internal bitmaps.
So set the default to at least 64Meg.
Signed-off-by: NeilBrown <neilb@suse.de>
Doug Ledford
Michael Evan
NeilBrown
Dan Williams
Artur Wojcik
Trela, Maciej