Both are impossible, and '1' allows size to be unsigned,
which is neater.
Also #define MAX_SIZE to be '1' to make it all more explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
The value of 'verbose' is sometimes mixed into 'brief', particularly
for Examine.
This is messy and confusing. So keep them separate.
'brief' still gets assumed when 'scan' is set, unless we are very
verbose.
Signed-off-by: NeilBrown <neilb@suse.de>
If we change some functions to accept 'verbose', where <0 means to be
quiet, in place of 'quiet', then we will be able to merge
'quiet' and 'verbose' together for simplicity.
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than passing a long list of little flags etc to various
functions we will soon pass a small collection of structures.
This first step combines a collection of variables local to
'main' into a single structure.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
As we don't allow '-K' for '--zero-super' there is no point
using it internally. Just define a 'KillOpt' like with
other options.
Signed-off-by: NeilBrown <neilb@suse.de>
->percent sometimes stores negative values recording states
like 'pending' or 'delayed'.
The value '-2' means both 'delayed' and in Monitor, 'unknown'.
Also, '-1' has a meaning but not #define.
So change the #defines to be prefixed with "RESYNC_", instead
of "PROCESS_", add new "_NONE" and "_UNKNOWN", and use correct
value in each location.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that /run seems to be a good standard, make that
the default for storing various run-time files, rather than
/var/run or /dev/.mdadm.
Signed-off-by: NeilBrown <neilb@suse.de>
mdinfo->bitmap_offset is a signed long and needs to be treated as
such when passed to the kernel.
This resolves the problem with adding internal bitmaps to a 1.0 array.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Both --detail and --monitor can report the names of member
devices on an array, and do so by searching /dev and finding
the shortest name that matches.
If
--prefer=foo
is given, they will instead prefer a name that contain /foo/.
So
mdadm --detail /dev/md0 --prefer=by-path
will list the component devices via their /dev/disk/by-path/xxx
names.
Signed-off-by: NeilBrown <neilb@suse.de>
When we can for devices using GET_DISK_INFO we currently
limit to 1024. But some arrays can have more than this.
So raise it to 4096 and make the constant a #define.
Signed-off-by: NeilBrown <neilb@suse.de>
Function reshape_super() guards metadata changes.
It is used to apply changes rollback in error case also.
As change (apply and rollback) can be not bi-directional reshape_super()
has to know if current action is metadata change that should be guarded
using metadata restrictions, or this is metadata rollback change
executed due to error occurrence.
In second case change has to be unconditional.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
As the bitmap can be before the superblock, bitmap_offset is signed.
But some of the code didn't honour that :-(
Signed-off-by: NeilBrown <neilb@suse.de>
It can easily be calculated from 'avail' and 'raid_disks', and we
will soon have a case where we don't have it easily available to pass
in.
Signed-off-by: NeilBrown <neilb@suse.de>
When --offroot is specified, mdadm will change the first character of
argv[0] to '@'. This is used to signal to systemd that mdadm was
launched from initramfs and should not be shut down before returning
to the initramfs.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If a 'remove' fails there is no certainty that another event will
happen soon, so make sure we retry soon anyway.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Adding a bitmap via ioctl can only add it at a fixed location.
That location is not suitable for 4K-block devices.
So allow setting the bitmap location via sysfs if kernel supports it
and aim to always use 4K alignments.
Signed-off-by: NeilBrown <neilb@suse.de>
This fields doesn't work any more as ->getinfo_super clears the info
structure at an awkward time. So get rid of it and do it differently.
The issue is that the metadata handler cannot tell if the uuid it has
was randomly generated or explicitly requested, except on the first
call.
And we don't want to accept explicit requests for IMSM.
So when it was auto-generated, make it look distinctive by having the
same int copied in all 4 positions. If someone requests a uuid like
that, I guess they get away with it.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm allowes to assemble 2 volumes with the same names based on the
config file. The issue is fixed by iterating over the list of md device
identifiers and comparing the names of md devices against each other,
detecting identical names and blocking the assembly should the same names
be found.
Now having detected duplicate names, mdadm terminates without assembling
the container, displaying appropriate prompt.
Signed-off-by: Lukasz Orlowski <lukasz.orlowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
search_mdstat and conf_match are almost identical.
Put all the functionality in conf_match, and remove search_mdstat.
Reported-by: Jes.Sorensen@redhat.com
Signed-off-by: NeilBrown <neilb@suse.de>
container_content retrieves volume information from disks in the
container. For unsupported volumes the function was not returning
mdinfo. When all volumes were unsupported the function was returning
NULL pointer to block actions on the volumes. Therefore, such volumes
were not activated in Incremental and Assembly. As side effect they
also could not be deleted using kill-subarray since "kill" function
requires to obtain a valid mdinfo from container_content.
This patch fixes the kill-subarray problem by allowing to obtain
mdinfo of all volumes types including unsupported and introducing new
array.status flags.
There are following changes:
1. Added MD_SB_BLOCK_VOLUME for blocking an array, other arrays in the
container can be activated.
2. Added MD_SB_BLOCK_CONTAINER_RESHAPE block container wide reshapes
(like changing disk numbers in arrays).
3. IMSM container_content handler is to load mdinfo for all volumes
and set both blocking flags in array.state field in mdinfo of
unsupported volumes. In case of some errors, all volumes can be
affected. Only blocked array is not activated (also reshaped as
result). The container wide reshapes are also blocked since by
metadata definition they require modifications of both arrays.
4. Incremental_container and Assemble functions check array.state and
do not activate volumes with blocking bits set.
5. assemble_container_content is changed to check container wide reshapes
before activating reshapes of assembled containers.
6. Grow_reshape and Grow_continue_command checks blocking bits
before starting reshapes or continueing (-G --continue) reshapes.
7. kill-subarray ignores array.state info and can remove requested array.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container is assembled while reshape is active on one of its member
whole container can be required to be blocked from monitoring.
For such purpose field recovery blocked is added to mdinfo structure.
When metadata handler finds active reshape in container it should set
recovery_blocked field to disable whole container monitoring during
reshape.
For arrays that doesn't use containers, recovery_blocked field
has the same value as reshape_active field e.g. super0/1.
In fact,recovery is blocked during reshape for such arrays.
For ddf, metadata handler doesn't set reshape_active field,
so recovery_blocked is not set also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
To allow for reshape continuation '--continue' option is added
to grow command.
Function that will be executed in grow-continue case doesn't require
information about reshape geometry. All required information are read
from metadata.
For external metadata reshape can be run for monitored array/container
only. In case when array/container is not monitored run mdmon for it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During initrd phase continuing reshape will cause file system context
lost. This blocks ability to control reshape using checkpoints.
To avoid this, during initrd phase assemble has to be executed with
'--freeze-reshape' option. This causes that mdadm restores reshape
critical section only.
Reshape can be continued later after system full boot.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
1. Three missing map_unlock() calls were added.
2. Map file must be unlocked on fork, else child will hold lock.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When validate_geometry finds that we haven't committed to
a metadata yet and that the subdev is a member of 'our'
container, it needs to report any errors it finds as Create()
cannot report them effectively.
So make a slight change to the semantics of the 'verbose' flag
and allow validate_geometry to report if it printed any error
messages.
Signed-off-by: NeilBrown <neilb@suse.de>
Reshape backup should be able to be restored during reshape continuation
also. To reuse already existing code it is moved to function.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If you create a two drive raid1 array with one device writemostly, then
fail the readwrite drive, when you add a new device, it will get the
writemostly bit copied out of the remaining device's superblock into
it's own. You can then remove the new drive and readd it as readwrite,
which will work for the readd, but it leaves the stale WriteMostly1 bit
in devflags resulting in the device going back to writemostly on the
next assembly.
The fix is to make sure that A) when we readd a device and we might have
filled the st->sb info from a running device instead of the device being
readded, then clear/set the WriteMostly1 bit in the super1 struct in
addition to setting the disk state (ditto for super0, but slightly
different mechanism) and B) when adding a clean device to an array (when
we most certainly did copy the superblock info from an existing device),
then clear any writemostly bits.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
0.90 arrays can only use up to 4TB per device. So when a larger
device is added, complain a bit. Still allow it if --force is given
as there could be a valid use.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Jes Sorensen
Adam Kwolek
Lukasz Orlowski
Labun, Marcin
Lukasz Dorau
Doug Ledford