If we change some functions to accept 'verbose', where <0 means to be
quiet, in place of 'quiet', then we will be able to merge
'quiet' and 'verbose' together for simplicity.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
We need to check every disk to see if it has a particular amount of
space spare, not just every subsequent disk.
Signed-off-by: NeilBrown <neilb@suse.de>
When container is assembled while reshape is active on one of its member
whole container can be required to be blocked from monitoring.
For such purpose field recovery blocked is added to mdinfo structure.
When metadata handler finds active reshape in container it should set
recovery_blocked field to disable whole container monitoring during
reshape.
For arrays that doesn't use containers, recovery_blocked field
has the same value as reshape_active field e.g. super0/1.
In fact,recovery is blocked during reshape for such arrays.
For ddf, metadata handler doesn't set reshape_active field,
so recovery_blocked is not set also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Now that getinfo_super clears the info structure, we need
to make sure the correct values are filled in to info->dev.
Signed-off-by: NeilBrown <neilb@suse.de>
container_content_imsm was setting info->next before calling
getinfo_super_imsm_container which now zeros everything.
So move that assignment to afterwards.
So both imsm and ddf were assuming info->disk.raid_disk means
something but it doesn't. So fix those.
Signed-off-by: NeilBrown <neilb@suse.de>
Some code currently clears 'info' before calling getinfo_super,
some code doesn't.
To be consistent, change it so no caller ever clears 'info',
but ever getinfo_super function must clear it.
Note that ->raid_disk may be meaningful if that 'map' is passed
non-NULL. In that case it is copied out before the structure
is zeroed.
Signed-off-by: NeilBrown <neilb@suse.de>
If a device hasn't been found yet we can still tell if it is
expected to be working, and we must to do to make sure
'working_disks' is correct.
Signed-off-by: NeilBrown <neilb@suse.de>
This is needed to remove devices from mdmon's knowledge when the
device is removed from the md container.
Now that ddf have a remove_from_super we don't need the code
that allows some personalities not to implement this.
Signed-off-by: NeilBrown <neilb@suse.de>
If a RAID1 is meant to have more than 2 device and while it doesn't
have that many, it still has more than 1, then according to the
DDF spec it is "partially optional" rather than "degraded"
So make that so.
Signed-off-by: NeilBrown <neilb@suse.de>
The DDF spec requires we have a phys disk record for every physically
attached device. But it isn't clear what that means in the case
of soft raid in a general purpose Linux computer.
So remove phys disk records for any failed device that is not
active in any array.
Signed-off-by: NeilBrown <neilb@suse.de>
This is a big fragile, but DDF has wierd rules that we aren't really
set up to handle properly.
When we add a device to a degraded array it must be a spare, so
mark it as Rebuilding.
Signed-off-by: NeilBrown <neilb@suse.de>
This is needed to remove devices from mdmon's knowledge when the
device is removed from the md container.
Now that ddf have a remove_from_super we don't need the code
that allows some personalities not to implement this.
Signed-off-by: NeilBrown <neilb@suse.de>
We weren't setting ->vcnum at all when an array was added. This
meant that a subsequent device failure could be assigned to the
wrong array.
Reported-by: Albert Pauw <albert.pauw@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When set_disk is called, we need to check if the disk has changed or
recently appeared, and update everything properly if it has.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ ignore devices with "state_fd < 0" as these have been removed.
2/ Set update 'length' properly and clear 'space'.
Signed-off-by: NeilBrown <neilb@suse.de>
We were setting ->container_member twice in ddf get_info.
Once to currentconf->vcnum,
once to atoi(st->subarray).
Both should be the same.
For consistency with super-intel, use the first.
Signed-off-by: NeilBrown <neilb@suse.de>
the new code for defaulting chunksizes didn't work quite right
- default was set to late in super1/super0/ddf
- defaults would over-ride values of '0' imposed by some levels
- default value wasn't applied to size properly.
Signed-off-by: NeilBrown <neilb@suse.de>
If a device is failed, then don't include it in the reported
container_content, else it might get included in the array.
Reported-by: Albert Pauw <albert.pauw@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When chunk size is not set from command line we need to guess it
depending on metadata given on command line or found on listed devices.
Validate_geometry sets the default for it's metadata if chunk is not set.
For external metadata chunk is set only when creating in a container.
For imsm validate_geometry_imsm_orom is responsible for finding default
chunk depending on container metadata loaded. Container will already know
which controller it is attached to, and have this controllers orom
available.
do_default_chunk indicates that we need to find default chunk and
if validate_geometry fails for some metadata it tells us to reset chunk
that may have been set.
Current solution would set default chunk correctly for imsm only if
container device was given on command line. With the list of devices
chunk was always set to 512.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We previously closed all 'fds' associated with an array in
write_init_super .. sometimes, and sometimes at bad times.
This isn't neat and free_super is a better place to close them.
So make sure free_super always closes the fds that the metadata
manager kept hold of, and stop closing them in write_init_super.
Also add a few more calls to free_super to make sure they really do
get closed.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Now that we check the error return of 'update_super' better, we
much make sure that ddf doesn't incorrectly report that the
superblocks are wrong during assemble.
Signed-off-by: NeilBrown <neilb@suse.de>
Support metadata specific level, layout and chunksize defaults. Kill an
uneeded superswitch methods ahead of adding more for the reshape case.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We more clearly separate out -I on a container, and use
load_container in that case and load_super only for true members.
This removes another use of loaded_container.
Signed-off-by: NeilBrown <neilb@suse.de>
This handles the 'container' part of 'load_super', so we can
soon make them completely separate - it is just confusing to
overload these two.
Signed-off-by: NeilBrown <neilb@suse.de>
It makes more sense to test for container_dev than for subarray
for several places in Create where it then uses container_dev.
This allows us to subsequently remove subarray.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the info for a single array to be extracted,
so we don't have to write it into st->subarray.
For consistency, implement container_content for super0 and super1,
to just return the mdinfo for the single array.
Signed-off-by: NeilBrown <neilb@suse.de>
We were setting ->container_member twice in ddf get_info.
Once to currentconf->vcnum,
once to atoi(st->subarray).
Both should be the same.
For consistency with super-intel, use the first.
Signed-off-by: NeilBrown <neilb@suse.de>
To accurately detect when an array has been split and is now being
recombined, we need to track which other devices each thinks is
working.
We should never include a device in an array if it thinks that the
primary device has failed.
This patch just allows get_info_super to return a list of devices
and whether they are thought to be working or not.
Signed-off-by: NeilBrown <neilb@suse.de>
If an --update is requested by the relevant metadata doesn't
understand it, print a useful message rather than silently ignoring
the issue.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Jes Sorensen
Adam Kwolek
Czarnowska, Anna
Dan Williams