Pull out the AHCI specific parts of detail_platform_imsm to separate functions.
Introduce support new types of controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
add_to_super_imsm handler is able to recognize new type of controller.
It stores the controller information in its structures and blocks
mixing of different controller type in the same container.
In this way it maintains compatibility between Linux and Windows IMSM RAID
stacks. IMSM metadata does not allow arrays to span on devices attached to
different storage controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch adds platform support for SAS controller(s) built in Intel(R) Patsburg
chipset.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If we can't read actual disk state, it shoud be initiated
to 0.
Overwise it may be out of date value resulting false action
later in code (e.g. set disk to improper state).
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Number of failed disks MUST be half of initial number of disks.
If number of failed disks is different we should not update
metadata- data corruption may occur after array reassemlation.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Implementation of raid0->raid10 takeover metadata update
at process_update level.
- We are using memory previously allocated in prepare_update to
create two dummy disks will be inserted in the metadata and
new imsm_dev structure with expanded disk order table.
- Update indexes in disk list
- Update metadata map
- Update disk order table
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allocate memory will be used in process_update.
For raid0->raid10 takeover operation number of disks doubles
so we should allocate memory for additional disks
and one imsm_dev structure with extended order table.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Create metadata update for raid0 -> raid10 takeover.
Because we have no mdmon running for raid0 we have to
update metadata using local update mechanism
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The patch introduces takeover from level 10 to level 0 for imsm
metadata. This patch contains procedures connected with preparing
and applying metadata update during 10 -> 0 takeover.
When performing takeover 10->0 mdmon should update the external
metadata (due to disk slot and level changes).
To achieve that mdadm calls reshape_super() and prepare
the "update_takeover" metadata update type.
Prepared update is processed by mdmon in process_update().
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
- when reshaping a container, ->reshape_active is already set
even though it isn't really active yet, so we need to set
the new geometry even when reshape_active is set. This is safe.
- When restarting a reshape, make sure the reshape_position is set
appropriately when external metadata is used.
Signed-off-by: NeilBrown <neilb@suse.de>
We previously closed all 'fds' associated with an array in
write_init_super .. sometimes, and sometimes at bad times.
This isn't neat and free_super is a better place to close them.
So make sure free_super always closes the fds that the metadata
manager kept hold of, and stop closing them in write_init_super.
Also add a few more calls to free_super to make sure they really do
get closed.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Only adjust reshape_progress based on the backup that was found
if the backup covered the current reshape_progress point.
Signed-off-by: NeilBrown <neilb@suse.de>
When reshaping backwards we only backup from backup_blocks to
the start, so initialise backup_point appropriately.
Signed-off-by: NeilBrown <neilb@suse.de>
I'm seen mdadm spinning while failing to read 'degraded'.
This doesn't really fix it, but is a reminder that it needs to be
fixed.
Signed-off-by: NeilBrown <neilb@suse.de>
When reshaping from the end of the array to the start, for times
when the number of data devices is decreasing, the handling of the
backup area isn't a simple mirror of the handling on low-to-hi
reshapes as the backup areas is always low in the array.
So re-write that to make it work.
Signed-off-by: NeilBrown <neilb@suse.de>
When reshaping it is correct to open containers exclusively, but not
arrays. The array could very easily be in use, e.g. by a mounted
filesystem.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For non re-striping transitions array must be unfrozen
before end of processing.
For restriping transitions we normally let the child
unfreeze the array but in this case there is no child.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
reshape.after.data_disks field must be initiated
for raid0<->raid10 transition.
Instead calculated spares_needed variable in reshape_array
function has random value.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function intended to use for single volume migration.
Function analyze transition and validate if it is supported.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Otherwise a random value will be used for comparison later
for native and ddf metadata (until min_acceptable_spare_size is defined).
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
md signals reshape completion (whole area or parts) by setting
sync_completed to 0. This causes in set_array_state() to rollback
metadata changes (super-intel.c:4977. To avoid this do not allow for
set last_checkpoint to 0 if reshape is finished.
This was also root cause of my previous fix for finalization reshape
that I agreed earlier is not necessary,
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm falls in "reduce size" error on takeovered array it jumps
to release and tries execute backward takeover. This time sra pointer
is not initialized and coredump is generated.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
In this situation to->parent is null so "to" doesn't change to
parent container and to->metadata is still null.
This results in segmentation fault when checking
to->metadata->ss->external.
We should just skip this array as container is needed to move spares to.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When we restart an array in the middle of a reshape, we reuse a lot of
the code for starting the reshape, but it needs to know that
circumstances are slightly different.
So add a 'restart' arg which is used:
- skip checking and adding spares
- activate the array (rather than start reshape)
- allow the backup file to already exist
Signed-off-by: NeilBrown <neilb@suse.de>
When restarting an array that is in the middle of a reshape,
sync_min cannot be set. So just ignore any errors we get
when trying to set it.
Signed-off-by: NeilBrown <neilb@suse.de>
Particular problem was that we didn't unfreeze if a reshape
wasn't needed.
But all that 'rv' stuff isn't needed and some of it was wrong,
so simplify it all.
Signed-off-by: NeilBrown <neilb@suse.de>
Function has been divided into two clear parts:
1. Container operations
2. Volume operations
Prototype of imsm_analyze_change function has been added.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We only 'goto release' on error, but that branch contained handling
for non-error conditions: reloading metadata. Obviously that doesn't
work.
So re-arrange the code to make it more of a straight line that is
easier to follow and reload the metadata if that might be at all
needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Everything other than the 'child' part of the 'switch(fork)' returns
quickly, so leave them inside the switch but move the other large bit
out so as to make the flow of code more natural.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ don't pass 'frozen' as an arg to unfreeze - just use it
to conditionally call 'unfreeze'.
2/ Always unfreeze at end of reshape_container
3/ Only unfreeze at end of reshape_array if not 'forked'. So when
reshape_array is called from reshape_container it doesn't unfreeze,
but when called directly.
Signed-off-by: NeilBrown <neilb@suse.de>
Field info->array.spare_disks is used on begin of reshape_array() to
check if there is enough number of spares to process reshape. During
container_content_imsm() call spare disks are not counted. This
causes that reshape_array() reports that there is not enough spares to
execute reshape.
Patch adds spares counting for reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container is passed to grow_reshape(), load_container() function
has to be used to get all required information from metadata.
So load_super is never correct here - in particular, cfd is a
'container fd' so we must 'load_container' on it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When process_update() replaces memory for bigger devices, old memory
areas are collected in a list and has to be assigned in to pointer in
update for later release.
List created from old devices is created and attached to space_list
for later releasing.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Local update is performed based on created update, so this code can broke
local update and it is not necessary as prepare and process update functions
are used.
Code removed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When update is created by mdadm, local information should be updated
also. This makes us to prepare one update for mdmon and second
"update" to maintain local changes. we can use prepared update for
"local/mdadm" metadata update purposes.
We have 2 cases:
1. when metadata is updated by mdmon, we avoid metadata reloading in
mdadm.
we proceed the same updtate 2 times:
- one time in mdadm for "local update"
- second time in mdmon for real metadat update
2. when metadata is updated by mdadm (no mdmon running) updates are
processed in the same way.
- one time in mdadm for "local update"
- there is no "second time" update but mdadm just flushes
metadata to array
This let us to avoid code duplication by using prepare and process
update functions as for update via mdmon. This makes update
preparing mdmon independent and there is no need to maintain the
same thing in 2 places in code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
reshape_super() called from reshape_container() with size set to
info->component_size gives size in reshape_super == -2 due to unsigned
signed conversion (info->component_size is not initializes).
As size is not changed during container reshape '-1' value is passed
to indicate this.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
reshape_array uses text_version to reload the container content,
so make sure it is available.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Only one spare is passed in update.
When more than one disk is added first spare is passed multiple times.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Slot was set based on anchor information.
Disks information was copied outside disk list area.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
load_super tries to load container first anyway but if it fails
eg. after physically removing a disk
then it tries to read metadata from container device.
This will always fail and print confusing errors.
So use load_container instead of load_super on container.
On failure to read metadata we should skip this array.
It will be dealt with the next time round.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add disks fails due to empty sys name field.
sysfs_init fills out required fields for add disk operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
To reshape a RAID0 we convert to RAID4 first. This makes it look
like it could be degraded and so we are tempted to ensure there are
enough spares. However this is not appropriate for RAID0, so
explicitly exclude new_level == RAID0 in this check
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Based on status information disks are added to array during grow (in reshape_array()).
This information currently is not present and all disks (old and new) were added to md.
To avoid adding already present disks, disk.state has to be set.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Labun Marcin
Krzysztof Wojcik
NeilBrown
Adam Kwolek
Czarnowska, Anna