DDF raid6 layouts are subtly different from the standard 'md' layouts.
From 2.6.30 the kernel knows about these.
Teach mdadm about them, and also allow 'ddf' to set an appropriate default.
Signed-off-by: NeilBrown <neilb@suse.de>
All operations that rely on loading from an existing container (like
--add) will fail after a disk has been removed. Provide an option to
skip missing / offline disks rather than abort. We attempt to do this
in the load_super_{imsm,ddf}_all cases when mdmon is running i.e. we
already have a consitent version of the metadata running in the system.
Otherwise, we fail as normal and let the administrator fix up the
container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If, when creating an array, a signal target device is given which
is a container, then allow the metadata handler to choose which
devices to use.
This is currently only supported for DDF.
Signed-off-by: NeilBrown <neilb@suse.de>
When we create our own ddf array, store the homehost in the vendor
information so it can be so to ensure 'LOCAL' name choices.
Signed-off-by: NeilBrown <neilb@suse.de>
Both super-ddf and super-intel ignore memory allocation failures during
->activate_spare. Fix these up by cancelling the activation.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Made the mistake of recompiling the F9 mdadm rpm which has a patch to
remove -Werror and add "-Wp,-D_FORTIFY_SOURCE -O2" which turns on lots
of errors:
config.c:568: warning: ignoring return value of asprintf
Assemble.c:411: warning: ignoring return value of asprintf
Assemble.c:413: warning: ignoring return value of asprintf
super0.c:549: warning: ignoring return value of posix_memalign
super0.c:742: warning: ignoring return value of posix_memalign
super0.c:812: warning: ignoring return value of posix_memalign
super1.c:692: warning: ignoring return value of posix_memalign
super1.c:1039: warning: ignoring return value of posix_memalign
super1.c:1155: warning: ignoring return value of posix_memalign
super-ddf.c:508: warning: ignoring return value of posix_memalign
super-ddf.c:645: warning: ignoring return value of posix_memalign
super-ddf.c:696: warning: ignoring return value of posix_memalign
super-ddf.c:715: warning: ignoring return value of posix_memalign
super-ddf.c:1476: warning: ignoring return value of posix_memalign
super-ddf.c:1603: warning: ignoring return value of posix_memalign
super-ddf.c:1614: warning: ignoring return value of posix_memalign
super-ddf.c:1842: warning: ignoring return value of posix_memalign
super-ddf.c:2013: warning: ignoring return value of posix_memalign
super-ddf.c:2140: warning: ignoring return value of write
super-ddf.c:2143: warning: ignoring return value of write
super-ddf.c:2147: warning: ignoring return value of write
super-ddf.c:2150: warning: ignoring return value of write
super-ddf.c:2162: warning: ignoring return value of write
super-ddf.c:2169: warning: ignoring return value of write
super-ddf.c:2172: warning: ignoring return value of write
super-ddf.c:2176: warning: ignoring return value of write
super-ddf.c:2181: warning: ignoring return value of write
super-ddf.c:2686: warning: ignoring return value of posix_memalign
super-ddf.c:2690: warning: ignoring return value of write
super-ddf.c:3070: warning: ignoring return value of posix_memalign
super-ddf.c:3254: warning: ignoring return value of posix_memalign
bitmap.c:128: warning: ignoring return value of posix_memalign
mdmon.c:94: warning: ignoring return value of write
mdmon.c:221: warning: ignoring return value of pipe
mdmon.c:327: warning: ignoring return value of write
mdmon.c:330: warning: ignoring return value of chdir
mdmon.c:335: warning: ignoring return value of dup
monitor.c:415: warning: rv may be used uninitialized in this function
...some of these like the write() ones are not so trivial so save those
fixes for the next patch.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
md/resync_start reports different terminal values depending on kernel
configuration (~0UL versus ~0ULL). Make detection of the
resync-complete state more robust by comparing against array size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
mdadm -I /dev/part-of-container
should add that to a container, creating if it needed,
and then try to assemble any arrays in the container.
Signed-off-by: NeilBrown <neilb@suse.de>
When we assemble an array, there are three different approaches
depending on whether metadata is internal or external, and on
kernel version.
Move all this to a common helper instead of duplicating in 3 places.
Signed-off-by: NeilBrown <neilb@suse.de>
When we first start an array, it might be good to start recovery
straight away. That requires setting the array to 'dirty', but
only the metadata handler can know if that is required or not.
So have a third possible 'consistent' option to set_array_state.
Either 'no' or 'yes' or 'you choose'.
Return value indicates what was chosen.
'1' (no) should be chosen unless there is a good reason.
Signed-off-by: NeilBrown <neilb@suse.de>
Using buffered IO risks non-atomic updates to parts of the
device that we don't actually want to write to. This isn't in
general safe.
So switch to O_DIRECT for all that IO and make sure we have
properly aligned buffers.
1/ track if there are any actual updates pending, and only
write metadata when we have changed something.
2/ when writing null virtual-configs, write full blocks,
not just the first 4 bytes. This will allow O_DIRECT
writes in a subsequent patch.
When loading the metadata for a subarray (super_by_fd), we set
->subarray to be the name read from md/metadata_version so that
getinfo_super can return info about the correct array.
With this we can differentiate between a container and
an array within the container by looking at ->subarray[0].
Only one superswitch should be externally visible for each
general type. Others which handle different flavours
(e.g. container/data-array) should be internal only.