Remove the _t pointer typedef and remove the _s suffix for the
structure,
These things do not help readability.
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than hiding this in the 'st', return it explicitly.
In the one case we still need it, copy it into st where needed.
This will disappear in a future patch.
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than hiding this arg in the 'st' structure, pass it explicitly.
This is a first step to getting rid of 'subarray' from 'supertype'.
The strcpy in open_subarray should have better error checking, but it
will disappear soon so there is little point.
Signed-off-by: NeilBrown <neilb@suse.de.
To accurately detect when an array has been split and is now being
recombined, we need to track which other devices each thinks is
working.
We should never include a device in an array if it thinks that the
primary device has failed.
This patch just allows get_info_super to return a list of devices
and whether they are thought to be working or not.
Signed-off-by: NeilBrown <neilb@suse.de>
If an --add is requested and a re-add looks promising but fails or
cannot possibly succeed, then don't try the add. This avoids
inadvertently turning devices into spares when an array is failed but
the devices seem to actually work.
Signed-off-by: NeilBrown <neilb@suse.de>
If udev is not in use, we create device in /dev when assembling
arrays and remove them when stopping the array.
However it may not always be correct to remove the device. If
the array was started with kernel auto-detect, them mdadm didn't
create anything and so shouldn't remove anything.
We don't record whether we created things, so just don't remove
anything with a 'standard' name. Only remove symlinks to the
standard name as we almost certainly created those.
Reported-by: Petre Rodan <petre.rodan@avira.com>
Signed-off-by: NeilBrown <neilb@suse.de>
One: a single character typo (of instead of or in an error printout)
Two: Audited usage of tfd file descriptor. Make sure that the tfd file
is always closed after usage, and that the tfd variable is reset to -1
if we are going to continue in our loop (not necessary if we know we
will return from our function without going through the dv loop again).
Signed-off-by: Doug Ledford <dledford@redhat.com>
--test can be given in Manage mode.
This can be used when there is an attempt to fail or remove 'faulty',
'failed' or 'detached' devices, or to re-add 'missing' devices.
If no devices were failed, removed, or re-added, then mdadm will
exit with status '2'.
Signed-off-by: NeilBrown <neilb@suse.de>
If the device name "missing" is given for --re-add, then mdadm will
attempt to find any device which should be a member of the array but
currently isn't and will --re-add it to the array.
This can be useful if a device disappeared due to a cabling problem,
and was then re-connected.
The appropriate sequence would be
mdadm /dev/mdX --fail detached
mdadm /dev/mdX --remove detached
mdadm /dev/mdX --re-add missing
Signed-off-by: NeilBrown <neilb@suse.de>
When using 0.90 metadata, devices can be renumbered when
earlier devices are removed.
So when iterating all devices looking for 'failed' or 'detached'
devices, we need to re-check the same slot we checked last time
to see if maybe it has a different device now.
Reported-by: Jim Paris <jim@jtan.com>
Resolves-Debian-Bug: 587550
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used for hot-unplug. When a device has been remove,
udev can call
mdadm --incremental --fail sda
and mdadm will find the array holding sda and remove sda from
the array.
Based on code from Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow kernel names like "sda" and "hdb1" to be used to
fail/remove devices from an array.
This is useful as after a device has been removed it can be difficult
to get the major/minor number.
Signed-off-by: NeilBrown <neilb@suse.de>
Allow the name of the array stored in the metadata to be updated. In
some cases the metadata format may not be able to support this rename
without modifying the UUID. In these cases the request will be blocked.
Otherwise we allow the rename to take place, even for active arrays.
This assumes that the user understands the difference between the kernel
node name, the device node symlink name, and the metadata specific name.
Anticipating further need to modify subarrays in-place, introduce the
->update_subarray() superswitch method. A future potential use
case is setting storage pool (spare-group) identifiers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
mdadm prevents creation when device names are duplicated on the command
line, but leaves the partially created array intact. Detect this case
in the error code from add_to_super() and cleanup the partially created
array. The imsm handler is updated to report this conflict in
add_to_super_imsm_volume().
Note that since neither mdmon, nor userspace for that matter, ever saw an
active array we only need to perform a subset of the cleanup actions.
So call ioctl(STOP_ARRAY) directly and arrange for Create() to cleanup
the map file rather than calling Manage_runstop().
Reported-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If /dev is static, a name may remain there after the
device has been detached from the system.
Using 'mdadm' to remove such a device from the array
should still work (even though "mdadm --remove detached"
might be preferred).
So when processing a device for '-r', don't insist on
being able to open the device.
Signed-off-by: NeilBrown <neilb@suse.de>
Minimal changes needed to permit reassembling partially recovered
external metadata arrays. The biggest logical change is that
->container_content() can now surface partially rebuilt members rather
than omitting them from the disk list.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If a device is marked as faulty, then a re-add will cause it to be
added as a faulty drive, which is not what it wanted.
So just refuse to try to re-add a device which is marked 'faulty'.
Signed-off-by: NeilBrown <neilb@suse.de>
As --add can destroy important data on a disk, and
--re-add is not suppose to, it is wrong to silently
try --add if --re-add fails.
So print a message and abort instead.
Signed-off-by: NeilBrown <neilb@suse.de>
As mdadm is normally a short-lived program it isn't always necessary
to free memory that was allocated, as the 'exit()' call will
automatically free everything. But it is more obviously correct if
the 'free' is there.
So this patch add a few calls to 'free'
Signed-off-by: NeilBrown <neilb@suse.de>
Bother Manage_reconfig and Grow_reshape provide for changing
the 'layout' of a faulty array. This is no necessary.
So discard Manage_reconfig and just use Grow_reshape
Signed-off-by: NeilBrown <neilb@suse.de>
The code for moving spares around a spare-group currently
only works for 0.90 metadata. Generalise it for 1.x metadata
as well.
Reported-by: "Garth Snyder" <garth@grsweb.us>
Signed-off-by NeilBrown <neilb@suse.de>
When building container members with -IR, we need to ensure that
devices added to an active array preserve the 'in_sync' status so they
don't needlessly get rebuilt.
So allow sysfs_add_disk to do this (only works in kernels since
2.6.30) and pass the relevant flag down.
Signed-off-by: NeilBrown <neilb@suse.de>
Skip the unique holder check in the detached case... pretty sure no one is
holding on to it if open() returns ENXIO.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure every failure from add_to_super prints a suitable
error message, and then don't print any error in the caller.
Signed-off-by: NeilBrown <neilb@suse.de>
Not all kernels automatically discard partitions when the
array is stopped, so call the RRPART ioctl to force it.
Signed-off-by: NeilBrown <neilb@suse.de>
This only applies if udev isn't installed or is disabled
by MDADM_NO_UDEV
We try to remove partitions too.
We find names to remove by looking in /var/run/mdadm/map
Signed-off-by: NeilBrown <neilb@suse.de>
When a 'container' gets started, we need udev to notice, but the
kernel has no way of knowing that a KOBJ_CHANGE event is needed. So
send one directly via the 'uevent' sysfs attribute.
Also, uevents don't get generated when md arrays are stopped (prior to
2.6.28) so send 'change' events then too.
Signed-off-by: NeilBrown <neilb@suse.de>
Previously it was possible to set the WRITEMOSTLY flag when
adding a device to an array, but not to clear the flag when re-adding.
This is now possible with --readwrite.
Signed-off-by: NeilBrown <neilb@suse.de>
When adding a device to an array, we check that it is large enough.
Currently the check makes sure there is also room for a reasonably
sized bitmap. But if the array doesn't have a bitmap, then this test
might be too restrictive.
So when adding, only insist there is enough space for the current
bitmap.
When Creating, still require room for the standard sized bitmap.
This resolved Debian Bug 500309
It is currently possible to remove a device and re-add it without the
manager noticing, i.e. without detecting a mdstat->devcnt
container->devcnt mismatch. Introduce ping_manager() to arrange for
mdmon to run manage_container() prior to mdadm dropping the exclusive
open() on the container. Despite these precautions sysfs_read() may
still fail. If this happens invalidate container->devcnt to ensure
manage_container() runs at the next event.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
NeilBrown
Doug Ledford
Dan Williams