44 lines
2.0 KiB
Plaintext
44 lines
2.0 KiB
Plaintext
# Prerequisite:
|
|
# 1. The clustermd_tests/ cases only support to test 2-node-cluster, cluster
|
|
# requires packages: 'pacemaker+corosync+sbd+crmsh', all packages link at
|
|
# "https://github.com/ClusterLabs/", and also requires dlm resource running
|
|
# on each node of cluster.
|
|
# For quick start HA-cluster with SUSE distributions, refer to the chapter 6-8:
|
|
# https://www.suse.com/documentation/sle-ha-12/install-quick/data/install-quick.html
|
|
# For Redhat distributions, please refer to:
|
|
# https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html-single/high_availability_add-on_administration/index
|
|
# 2. Setup ssh-access with no-authorized mode, it should be:
|
|
# # 'ssh $node1 -l root ls' and 'ssh $node2 -l root ls' success on any node.
|
|
# 3. Fill-up node-ip part and disks part as following.
|
|
|
|
# Set node1 as the master node, the cluster-md cases should run on this node,
|
|
# and node2 is the slave node.
|
|
# For example:
|
|
# NODE1=192.168.1.100 (testing run here)
|
|
# NODE2=192.168.1.101
|
|
NODE1=
|
|
NODE2=
|
|
|
|
# Provide the devlist for clustermd-testing, alternative: if set the step 1,
|
|
# don't set step 2, and vice versa.
|
|
# 1. Use ISCSI service to provide shared storage, then login ISCSI target via
|
|
# to ISCSI_TARGET_ID and ISCSI_TARGET_IP on iscsi clients, commands like:
|
|
# Execute on iscsi clients:
|
|
# 1) discover the iscsi server.
|
|
# # iscsiadm -m discovery -t st -p $ISCSI_TARGET_IP
|
|
# 2) login and establish connection.
|
|
# # iscsiadm -m node -T $ISCSI_TARGET_ID -p $ISCSI_TARGET_IP -l
|
|
# Note:
|
|
# On ISCSI server, must create all iscsi-luns in one target_id, recommend more
|
|
# than 6 luns/disks for testing, and each disk should be: 100M < disk < 800M.
|
|
# 2. If all cluster-nodes mounted the same disks directly, and the devname are
|
|
# the same on all nodes, then put them to 'devlist'.
|
|
|
|
# For example: (Only set $ISCSI_TARGET_ID is enough if iscsi has already connected)
|
|
# ISCSI_TARGET_ID=iqn.2018-01.example.com:clustermd-testing
|
|
# ISCSI_TARGET_IP=192.168.1.102
|
|
ISCSI_TARGET_ID=
|
|
|
|
#devlist=/dev/sda /dev/sdb /dev/sdc /dev/sdd
|
|
devlist=
|