Martchus
/
syncthing
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

gui, man, authors: Update docs, translations, and contributors

This commit is contained in:
Jakob Borg 2021-08-18 07:45:38 +02:00
parent d47745a86b
commit ca908270ec
18 changed files with 94 additions and 91 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
gui/default/assets/lang/lang-bg.json
View File

@ -42,7 +42,7 @@
"Available debug logging facilities:": "Достъпни улеснения при отстраняване на дефекти:",
"Be careful!": "Внимание!",
"Bugs": "Дефекти",
"Cancel": "Cancel",
"Cancel": "Отказ",
"Changelog": "Дневник на промените",
"Clean out after": "Почистване след",
"Cleaning Versions": "Cleaning Versions",

18
gui/default/assets/lang/lang-ja.json
View File

@ -18,7 +18,7 @@
"Advanced": "高度な設定",
"Advanced Configuration": "高度な設定",
"All Data": "全てのデータ",
"All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.",
"All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "このデバイスと共有するすべてのフォルダーはパスワードによって保護されなければならず、送信されたすべてのデータは指定したパスワードがなければ読み取れません。",
"Allow Anonymous Usage Reporting?": "匿名で使用状況をレポートすることを許可しますか？",
"Allowed Networks": "許可されているネットワーク",
"Alphabetic": "アルファベット順",
@ -38,7 +38,7 @@
"Automatic upgrade now offers the choice between stable releases and release candidates.": "自動アップグレードは、安定版とリリース候補版のいずれかを選べるようになりました。",
"Automatic upgrades": "自動アップグレード",
"Automatic upgrades are always enabled for candidate releases.": "Automatic upgrades are always enabled for candidate releases.",
"Automatically create or share folders that this device advertises at the default path.": "Automatically create or share folders that this device advertises at the default path.",
"Automatically create or share folders that this device advertises at the default path.": "このデバイスが通知するデフォルトのパスで自動的にフォルダを作成、共有します。",
"Available debug logging facilities:": "Available debug logging facilities:",
"Be careful!": "注意！",
"Bugs": "バグ",
@ -76,7 +76,7 @@
"Deleted": "削除",
"Deselect All": "すべて選択解除",
"Deselect devices to stop sharing this folder with.": "このフォルダの共有を停止したいデバイスがある場合は、当該デバイスの選択を解除してください。",
"Deselect folders to stop sharing with this device.": "Deselect folders to stop sharing with this device.",
"Deselect folders to stop sharing with this device.": "このデバイスとの共有を停止するフォルダーを選択解除します。",
"Device": "デバイス",
"Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "デバイス「{{name}}」 ({{address}} の {{device}}) が接続を求めています。新しいデバイスとして追加しますか？",
"Device ID": "デバイスID",
@ -120,7 +120,7 @@
"Enabled": "有効",
"Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "0以上の数 (例: 2.35) を入力し、単位を選択してください。パーセントはディスク容量全体に対する割合です。",
"Enter a non-privileged port number (1024 - 65535).": "非特権ポート番号 (1024 - 65535) を入力してください。",
"Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
"Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "カンマ区切りのアドレス(\"tcp://ip:port\", \"tcp://host:port\")を入力するか、「dynamic」でアドレスの自動検出を行います。",
"Enter ignore patterns, one per line.": "無視するファイル名のパターンを、一行につき一条件で入力してください。",
"Enter up to three octal digits.": "Enter up to three octal digits.",
"Error": "エラー",
@ -151,7 +151,7 @@
"GUI": "GUI",
"GUI Authentication Password": "GUI認証パスワード",
"GUI Authentication User": "GUI認証ユーザー名",
"GUI Authentication: Set User and Password": "GUI Authentication: Set User and Password",
"GUI Authentication: Set User and Password": "GUI認証: ユーザーとパスワードを設定",
"GUI Listen Address": "GUI待ち受けアドレス",
"GUI Theme": "GUIテーマ",
"General": "一般",
@ -164,7 +164,7 @@
"However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.": "However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.",
"Identification": "Identification",
"If untrusted, enter encryption password": "信頼しない場合、暗号化パスワードを入力",
"If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.": "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.",
"If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.": "このコンピューター上の他のユーザーがSyncthingやあなたのファイルにアクセスできないようにしたい場合は、認証の設定を検討してください。",
"Ignore": "無視",
"Ignore Patterns": "無視するファイル名",
"Ignore Permissions": "パーミッションを無視する",
@ -283,7 +283,7 @@
"Select All": "すべて選択",
"Select a version": "バージョンを選択してください",
"Select additional devices to share this folder with.": "このフォルダの共有に追加したいデバイスがある場合は、当該デバイスを選択してください。",
"Select additional folders to share with this device.": "Select additional folders to share with this device.",
"Select additional folders to share with this device.": "このデバイスと共有する追加のフォルダーを選択します。",
"Select latest version": "最も新しいバージョンを選択",
"Select oldest version": "最も古いバージョンを選択",
"Select the folders to share with this device.": "このデバイスと共有するフォルダーを選択してください。",
@ -337,7 +337,7 @@
"Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthingが落ちているか、インターネット接続に問題があります。リトライ中です…",
"Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "リクエストの処理に問題があるようです。問題が継続する場合、ページを更新するかSyncthingを再起動してください。",
"Take me back": "キャンセル",
"The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.": "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.",
"The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.": "GUIアドレスはスタートアップオプションによってオーバーライドされます。ここでの変更はオーバーライドが行われている間は有効になりません。",
"The Syncthing Authors": "The Syncthing Authors",
"The Syncthing admin interface is configured to allow remote access without a password.": "Syncthingの管理画面が、パスワードなしで外部からアクセスできるように設定されています。",
"The aggregated statistics are publicly available at the URL below.": "集計結果は以下のURLで公開されています。",
@ -402,7 +402,7 @@
"Usage reporting is always enabled for candidate releases.": "リリース候補版では常に使用状況レポートが送信されます。",
"Use HTTPS for GUI": "GUIにHTTPSを使用する",
"Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
"Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
"Username/Password has not been set for the GUI authentication. Please consider setting it up.": "GUI認証のためのユーザー名/パスワードが設定されていません。設定を検討してください。",
"Version": "バージョン",
"Versions": "バージョン",
"Versions Path": "古いバージョンを保存するパス",

2
man/stdiscosrv.1
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "STDISCOSRV" "1" "Jul 31, 2021" "v1" "Syncthing"
.TH "STDISCOSRV" "1" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
stdiscosrv \- Syncthing Discovery Server
.SH SYNOPSIS

2
man/strelaysrv.1
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "STRELAYSRV" "1" "Jul 31, 2021" "v1" "Syncthing"
.TH "STRELAYSRV" "1" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
strelaysrv \- Syncthing Relay Server
.SH SYNOPSIS

2
man/syncthing-bep.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-BEP" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-BEP" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-bep \- Block Exchange Protocol v1
.SH INTRODUCTION AND DEFINITIONS

93
man/syncthing-config.5
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-CONFIG" "5" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-CONFIG" "5" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-config \- Syncthing Configuration
.SH SYNOPSIS
@ -247,7 +247,7 @@ GUI.
.B ignoredFolder
Contains the ID of the folder that should be ignored. This folder will
always be skipped when advertised from a remote device, i.e. this will be
logged, but there will be no dialog about it in the web GUI.
logged, but there will be no dialog shown in the web GUI.
.UNINDENT
.SH FOLDER ELEMENT
.INDENT 0.0
@ -291,7 +291,7 @@ element:
.INDENT 0.0
.TP
.B id
The folder ID, must be unique. (mandatory)
The folder ID, which must be unique. (mandatory)
.TP
.B label
The label of a folder is a human readable and descriptive local name. May
@ -323,17 +323,17 @@ changes to other devices.
.UNINDENT
.TP
.B rescanIntervalS
The rescan interval, in seconds. Can be set to zero to disable when external
The rescan interval, in seconds. Can be set to \fB0\fP to disable when external
plugins are used to trigger rescans.
.TP
.B fsWatcherEnabled
If enabled this detects changes to files in the folder and scans them.
If set to \fBtrue\fP, this detects changes to files in the folder and scans them.
.UNINDENT
.INDENT 0.0
.TP
.B fsWatcherDelayS
The duration during which changes detected are accumulated, before a scan is
scheduled (only takes effect if \fBfsWatcherEnabled\fP is true).
scheduled (only takes effect if \fBfsWatcherEnabled\fP is set to \fBtrue\fP).
.TP
.B ignorePerms
True if the folder should ignore permissions.
@ -374,8 +374,8 @@ versioning
.INDENT 0.0
.TP
.B copiers, pullers, hashers
The number of copier, puller and hasher routines to use, or zero for the
system determined optimum. These are low level performance options for
The number of copier, puller and hasher routines to use, or \fB0\fP for the
system determined optimums. These are low level performance options for
advanced users only; do not change unless requested to or you’ve actually
read and understood the code yourself. :)
.TP
@ -409,29 +409,29 @@ the 1 KB becomes known to the pulling device.
\fBWARNING:\fP
.INDENT 7.0
.INDENT 3.5
Enabling this is highly not recommended \- use at your own risk.
Enabling this is highly discouraged \- use at your own risk. You have been warned.
.UNINDENT
.UNINDENT
.sp
When set to true, this device will pretend not to see instructions to
When set to \fBtrue\fP, this device will pretend not to see instructions to
delete files from other devices.
.TP
.B scanProgressIntervalS
The interval with which scan progress information is sent to the GUI. Zero
means the default value (two seconds).
The interval in seconds with which scan progress information is sent to the GUI. Setting to \fB0\fP
will cause Syncthing to use the default value of two.
.TP
.B pullerPauseS
Tweak for rate limiting the puller when it retries pulling files. Don’t
change these unless you know what you’re doing.
change this unless you know what you’re doing.
.TP
.B maxConflicts
The maximum number of conflict copies to keep around for any given file.
The default, \-1, means an unlimited number. Setting this to zero disables
The default, \fB\-1\fP, means an unlimited number. Setting this to \fB0\fP disables
conflict copies altogether.
.TP
.B disableSparseFiles
By default, blocks containing all zeroes are not written, causing files
to be sparse on filesystems that support the concept. When set to true,
By default, blocks containing all zeros are not written, causing files
to be sparse on filesystems that support this feature. When set to \fBtrue\fP,
sparse files will not be created.
.TP
.B disableTempIndexes
@ -439,33 +439,33 @@ By default, devices exchange information about blocks available in
transfers that are still in progress, which allows other devices to
download parts of files that are not yet fully downloaded on your own
device, essentially making transfers more torrent like. When set to
true, such information is not exchanged for this folder.
\fBtrue\fP, such information is not exchanged for this folder.
.TP
.B paused
True if this folder is (temporarily) suspended.
.TP
.B weakHashThresholdPct
Use weak hash if more than the given percentage of the file has changed. Set
to \-1 to always use weak hash. Default value is 25.
to \fB\-1\fP to always use weak hash. Default is \fB25\fP\&.
.TP
.B markerName
Name of a directory or file in the folder root to be used as
marker\-faq\&. Default is “.stfolder”.
marker\-faq\&. Default is \fB\&.stfolder\fP\&.
.TP
.B copyOwnershipFromParent
On Unix systems, tries to copy file/folder ownership from the parent directory (the directory it’s located in).
Requires running Syncthing as privileged user, or granting it additional capabilities (e.g. CAP_CHOWN on Linux).
Requires running Syncthing as a privileged user, or granting it additional capabilities (e.g. CAP_CHOWN on Linux).
.TP
.B modTimeWindowS
Allowed modification timestamp difference when comparing files for
equivalence. To be used on file systems which have unstable
modification timestamps that might change after being recorded
during the last write operation. Defaults to 2 on Android when the
folder is located on a FAT partition, and always to 0 elsewhere.
during the last write operation. Default is \fB2\fP on Android when the
folder is located on a FAT partition, and \fB0\fP otherwise.
.TP
.B maxConcurrentWrites
Maximum number of concurrent write operations while syncing. Defaults to 2. Increasing this might increase or
decrease disk performance, depending on the underlying storage.
Maximum number of concurrent write operations while syncing. Increasing this might increase or
decrease disk performance, depending on the underlying storage. Default is \fB2\fP\&.
.UNINDENT
.sp
disableFsync
@ -494,7 +494,7 @@ Available options:
.TP
.B standard (default):
The blocks of a file are split into N equal continuous sequences, where N is the number of connected
devices. Each device starts downloading it’s own sequence, after which it picks other devices
devices. Each device starts downloading its own sequence, after which it picks other devices
sequences at random. Provides acceptable data distribution and minimal spinning disk strain.
.TP
.B random:
@ -596,10 +596,10 @@ to even if the original introducer is no longer listing the remote device as kno
Defines which device has introduced us to this device. Used only for following de\-introductions.
.TP
.B certName
The device certificate common name, if it is not the default “syncthing”.
The device certificate’s common name, if it is not the default “syncthing”.
.UNINDENT
.sp
From following child elements at least one \fBaddress\fP child must exist.
From the following child elements at least one \fBaddress\fP child must exist.
.INDENT 0.0
.TP
.B address
@ -706,8 +706,8 @@ If not \fBtrue\fP, the GUI and API will not be started.
.TP
.B tls
If set to \fBtrue\fP, TLS (HTTPS) will be enforced. Non\-HTTPS requests will
be redirected to HTTPS. When this is set to \fBfalse\fP, TLS connections are
still possible but it is not mandatory.
be redirected to HTTPS. When set to \fBfalse\fP, TLS connections are
still possible but not required.
.TP
.B debugging
This enables profiling and additional debugging endpoints in the rest\-api\&.
@ -721,10 +721,10 @@ Set the listen address. One address element must be present. Allowed address for
.INDENT 7.0
.TP
.B IPv4 address and port (\fB127.0.0.1:8384\fP)
The address and port is used as given.
The address and port are used as given.
.TP
.B IPv6 address and port (\fB[::1]:8384\fP)
The address and port is used as given. The address must be enclosed in
The address and port are used as given. The address must be enclosed in
square brackets.
.TP
.B Wildcard and port (\fB0.0.0.0:12345\fP, \fB[::]:12345\fP, \fB:12345\fP)
@ -733,11 +733,11 @@ interfaces via both IPv4 and IPv6.
.TP
.B UNIX socket location (\fB/var/run/st.sock\fP)
If the address is an absolute path it is interpreted as the path to a UNIX socket.
(Added in v0.14.52.)
.UNINDENT
.TP
.B unixSocketPermissions
In the case that a UNIX socket location is used for \fBaddress\fP, set this to an octal to override the default permissions of the socket.
When \fBaddress\fP is set to a UNIX socket location, set this to an octal value
to override the default permissions of the socket.
.TP
.B user
Set to require authentication.
@ -756,8 +756,8 @@ without authorization. A warning will displayed about this setting on startup.
The name of the theme to use.
.TP
.B authMode
Authentication mode to use. If not present authentication mode (static)
is controlled by presence of user/password fields for backward compatibility.
Authentication mode to use. If not present, the authentication mode (static)
is controlled by the presence of user/password fields for backward compatibility.
.INDENT 7.0
.TP
.B static
@ -792,7 +792,7 @@ LDAP server address (server:port).
.TP
.B bindDN
BindDN for user authentication.
Special %s variable should be used to pass username to LDAP.
Special \fB%s\fP variable should be used to pass username to LDAP.
.UNINDENT
.sp
transport
@ -814,7 +814,7 @@ StartTLS connection mode.
.INDENT 0.0
.TP
.B insecureSkipVerify
Skip verification (true or false).
Skip verification (\fBtrue\fP or \fBfalse\fP).
.UNINDENT
.SH OPTIONS ELEMENT
.INDENT 0.0
@ -878,12 +878,12 @@ The \fBoptions\fP element contains all other global configuration options.
.TP
.B listenAddress
The listen address for incoming sync connections. See
\fI\%Listen Addresses\fP for allowed syntax.
\fI\%Listen Addresses\fP for the allowed syntax.
.TP
.B globalAnnounceServer
A URI to a global announce (discovery) server, or the word \fBdefault\fP to
include the default servers. Any number of globalAnnounceServer elements
may be present. The syntax for non\-default entries is that of a HTTP or
may be present. The syntax for non\-default entries is that of an HTTP or
HTTPS URL. A number of options may be added as query options to the URL:
\fBinsecure\fP to prevent certificate validation (required for HTTP URLs)
and \fBid=<device ID>\fP to perform certificate pinning. The device ID to
@ -914,7 +914,7 @@ The number of seconds to wait between each attempt to connect to currently
unconnected devices.
.TP
.B relaysEnabled
When true, relays will be connected to and potentially used for device to device connections.
When \fBtrue\fP, relays will be connected to and potentially used for device to device connections.
.TP
.B relayReconnectIntervalM
Sets the interval, in minutes, between relay reconnect attempts.
@ -956,19 +956,19 @@ When true, the UR URL can be http instead of https, or have a self\-signed
certificate. The default is \fBfalse\fP\&.
.TP
.B urInitialDelayS
The time to wait from startup to the first usage report being sent. Allows
The time to wait from startup for the first usage report to be sent. Allows
the system to stabilize before reporting statistics.
.TP
.B restartOnWakeup
Whether to perform a restart of Syncthing when it is detected that we are
waking from sleep mode (i.e. a folded up laptop).
waking from sleep mode (i.e. an unfolding laptop).
.TP
.B autoUpgradeIntervalH
Check for a newer version after this many hours. Set to zero to disable
Check for a newer version after this many hours. Set to \fB0\fP to disable
automatic upgrades.
.TP
.B upgradeToPreReleases
If true, automatic upgrades include release candidates (see
If \fBtrue\fP, automatic upgrades include release candidates (see
releases).
.TP
.B keepTemporariesH
@ -1048,7 +1048,10 @@ as part of launching Syncthing, set this option to \fBfalse\fP\&.
.UNINDENT
.SS Listen Addresses
.sp
The following address types are accepted in sync protocol listen addresses. If you want Syncthing to listen on multiple addresses, you can either: add multiple \fB<listenAddress>\fP tags in the configuration file or enter several addresses separated by commas in the GUI.
The following address types are accepted in sync protocol listen addresses.
If you want Syncthing to listen on multiple addresses, you can either: add
multiple \fB<listenAddress>\fP tags in the configuration file or enter several
addresses separated by commas in the GUI.
.INDENT 0.0
.TP
.B Default listen addresses (\fBdefault\fP)

2
man/syncthing-device-ids.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-DEVICE-IDS" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-DEVICE-IDS" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-device-ids \- Understanding Device IDs
.sp

2
man/syncthing-event-api.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-EVENT-API" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-EVENT-API" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-event-api \- Event API
.SH DESCRIPTION

44
man/syncthing-faq.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-FAQ" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-FAQ" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-faq \- Frequently Asked Questions
.INDENT 0.0
@ -348,14 +348,14 @@ known state (before disconnect or network delay) and the current state at the
neighbour, and if there were updates, deletes, creates, conflicts, which were
overlapping we only see the \fIlatest change\fP for a given file or directory (and
the node where that latest change occurred). When we connect to multiple neighbours
Syncthing decides which neighbor has the latest state, or if the states conflict
Syncthing decides which neighbour has the latest state, or if the states conflict
it initiates the conflict resolution procedure, which in the end results in a consistent
up\-to\-date state with all the neighbours.
.SS Why does Syncthing connect to this unknown/suspicious address?
.sp
If you see outgoing connections to odd and unexpected addresses these are
most likely connections to relay servers\&. Relay servers
are run by volunteers all over the world. They usually listen on port 443 or
are run by volunteers all over the world. They usually listen on ports 443 or
22067, though this is controlled by the user running it. You can compare the
address you are concernced about with \fI\%the current list of active relays\fP <\fBhttps://relays.syncthing.net\fP>\&. Relays do not and can not see the data
transmitted via them.
@ -417,26 +417,26 @@ programs to achieve this such as \fI\%rsync\fP <\fBhttps://rsync.samba.org/\fP>
\fI\%Unison\fP <\fBhttps://www.cis.upenn.edu/~bcpierce/unison\fP>\&.
.SS When I do have two distinct Syncthing\-managed folders on two hosts, how does Syncthing handle moving files between them?
.sp
Syncthing does not specially handle this case, and most files most likely get
Syncthing does not specially handle this case, and most files will most likely get
re\-downloaded.
.sp
In detail, the behavior depends on the scan order. If you have folder A and B,
and move files from A to B, if A gets scanned first, it will announce removal of
the files to others who will remove the files. As you rescan B, B will
announce addition of new files, and other peers will have nowhere to get
In detail, the behavior depends on the scan order. If you have folders A and B,
and move files from A to B, if A gets scanned first, it will announce the removal of
the files to others who will then remove the files. As you rescan B, B will
announce the addition of new files, and other peers will have nowhere to get
them from apart from re\-downloading them.
.sp
If B gets rescanned first, B will announce additions first, remote
peers will reconstruct the files (not rename, more like copy block by
block) from A, and then as A gets rescanned remove the files from A.
If B gets rescanned first, B will announce additions first, and remote
peers will then reconstruct the files (not rename, more like copying block by
block) from A, and then as A gets rescanned, it will remove the files from A.
.sp
A workaround would be to copy first from A to B, rescan B, wait for B to
rebuild on remote ends, and then delete from A.
copy the files on the remote side, and then delete from A.
.SS Is Syncthing my ideal backup application?
.sp
No. Syncthing is not a great backup application because all changes to your
files (modifications, deletions, etc.) will be propagated to all your
devices. You can enable versioning, but we encourage the use of other tools
devices. You can enable versioning, but we encourage you to use other tools
to keep your data safe from your (or our) mistakes.
.SS How can I exclude files with brackets (\fB[]\fP) in the name?
.sp
@ -448,13 +448,13 @@ To match an actual file \fIcalled\fP \fBq[abc]x\fP the pattern needs to “escap
the brackets, like so: \fBq\e[abc\e]x\fP\&.
.sp
On Windows, escaping special characters is not supported as the \fB\e\fP
character is used as a path separator. On the other hand, special characters
such as \fB[\fP and \fB?\fP are not allowed in file names on Windows.
character is used as a path separator.
.SS How do I access the web GUI from another computer?
.sp
The default listening address is 127.0.0.1:8384, so you can only access the
GUI from the same machine. This is for security reasons. Change the \fBGUI
listen address\fP through the web UI from \fB127.0.0.1:8384\fP to
GUI from the same machine. This is for security reasons. To access the web
GUI from another computer, change the \fBGUI listen address\fP through the web
UI from \fB127.0.0.1:8384\fP to
\fB0.0.0.0:8384\fP or change the config.xml:
.INDENT 0.0
.INDENT 3.5
@ -544,7 +544,7 @@ to get an idea how to do that.
.sp
If you use a package manager such as Debian’s apt\-get, you should upgrade
using the package manager. If you use the binary packages linked from
Syncthing.net, you can use Syncthing built in automatic upgrades.
Syncthing.net, you can use Syncthing’s built\-in automatic upgrade functionality.
.INDENT 0.0
.IP \(bu 2
If automatic upgrades is enabled (which is the default), Syncthing will
@ -556,7 +556,7 @@ released. Pressing it will perform an upgrade.
To force an upgrade from the command line, run \fBsyncthing \-upgrade\fP\&.
.UNINDENT
.sp
Note that your system should have CA certificates installed which allow a
Note that your system should have CA certificates installed which allows a
secure connection to GitHub (e.g. FreeBSD requires \fBsudo pkg install
ca_root_nss\fP). If \fBcurl\fP or \fBwget\fP works with normal HTTPS sites, then
so should Syncthing.
@ -577,7 +577,7 @@ of the command, not the package), look into the local documentation for that, it
will almost certainly cover 100% of what you want to do. If you don’t have
\fBstart\-stop\-daemon\fP, there are a bunch of other software packages you could use
to do this. The most well known is called daemontools, and can be found in the
standard package repositories for almost every modern Linux distribution.
standard package repositories for almost every modern Linux distribution.
Other popular tools with similar functionality include S6 and the aforementioned
runit.
.SS How do I increase the inotify limit to get my filesystem watcher to work?
@ -625,14 +625,14 @@ This only takes effect after a reboot. To adjust the limit immediately, run:
.sp
.nf
.ft C
sudo sh \-c \(aqecho 204800 > /proc/sys/fs/inotify/max_user_watches\(aq
echo 204800 | sudo tee /proc/sys/fs/inotify/max_user_watches
.ft P
.fi
.UNINDENT
.UNINDENT
.SS How do I reset the GUI password?
.sp
If you’ve forgotten/lost the GUI password, you can remove it by deleting the \fB<user>\fP and \fB<password>\fP XML tags from the \fB<gui>\fP block in file \fBconfig.xml\fP\&. This should be done while Syncthing is not running. The location of the file depends on OS and is described in the configuration documentation.
If you’ve forgotten/lost the GUI password, you can remove it by deleting the \fB<user>\fP and \fB<password>\fP XML tags from the \fB<gui>\fP block in file \fBconfig.xml\fP\&. This should be done while Syncthing is not running. The location of the file depends on the OS and is described in the configuration documentation.
.sp
For example, the two emphasized lines below would be removed from the file.
.INDENT 0.0

2
man/syncthing-globaldisco.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-GLOBALDISCO" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-GLOBALDISCO" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-globaldisco \- Global Discovery Protocol v3
.SH ANNOUNCEMENTS

2
man/syncthing-localdisco.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-LOCALDISCO" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-LOCALDISCO" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-localdisco \- Local Discovery Protocol v4
.SH MODE OF OPERATION

2
man/syncthing-networking.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-NETWORKING" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-NETWORKING" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-networking \- Firewall Setup
.SH ROUTER SETUP

2
man/syncthing-relay.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-RELAY" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-RELAY" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-relay \- Relay Protocol v1
.SH WHAT IS A RELAY?

2
man/syncthing-rest-api.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-REST-API" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-REST-API" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-rest-api \- REST API
.sp

2
man/syncthing-security.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-SECURITY" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-SECURITY" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-security \- Security Principles
.sp

2
man/syncthing-stignore.5
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-STIGNORE" "5" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-STIGNORE" "5" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-stignore \- Prevent files from being synchronized to other nodes
.SH SYNOPSIS

2
man/syncthing-versioning.7
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-VERSIONING" "7" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING-VERSIONING" "7" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing-versioning \- Keep automatic backups of deleted files by other nodes
.sp

2
man/syncthing.1
View File

@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING" "1" "Jul 31, 2021" "v1" "Syncthing"
.TH "SYNCTHING" "1" "Aug 17, 2021" "v1" "Syncthing"
.SH NAME
syncthing \- Syncthing
.SH SYNOPSIS