improve parsing of gui-address overrides
make checks for whether the gui-address is overridden consistent by
checking whether the environment variable is set and not an empty
string. the `Network()` function however checked for the inclusion of
a slash instead of the presence of any characters. If the config file's
gui address was set to a unix socket and the gui override to a tcp
address, then the function would have wrongly returned "unix".
the `URL()` function always returned the config file's gui address if a
unix socket was configured, even if an override was specified.
the `URL()` function wrongly formatted unix addresses. the http(s)
protocol was used as the sheme and the path was percent escaped. because
of the previous bug, this could only be triggered if the config file's
gui address was tcp and an unix socket override was given.
simplify the `useTLS()` function's codepath for overrides.
Co-authored-by: digital <didev@dinid.net>
This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Safety check added in v1.23.6 introduced bug. Bug unshares folders with untrusted devices if folder does not have an encryption password set, regardless of whether the folder is shared with the untrusted device as encrypted or not. Prevents sharing with untrusted devices in some cases where sharing would be encrypted.
Patch preserves safety check but permits sharing folders with untrusted devices if they are shared as encrypted.
Signed-off-by: kewiha <keithh@protonmail.com>
This prevents combining untrusted with introducer and auto-accept, and
also verifies that folders shared with untrusted devices have passwords
at config loading time.
Co-authored-by: Simon Frei <freisim93@gmail.com>
We usually want to ensure that our own device is present. However if the
given device ID is the empty ID, we shouldn't do that. This is a
legimate (though way too non-obvious) use-case when opening the config
without knowing/caring about the device ID.
This fixes various test issues with Go 1.20.
- Most tests rewritten to use fakefs where possible
- Some tests that were already skipped, or dubious (invasive,
unmaintainable, unclear what they even tested) have been removed
- Some actual code rewritten to better support testing in fakefs
Co-authored-by: Eric P <eric@kastelo.net>
This makes the various protocol priorities configurable among the other
options. With this, it's possible to prefer QUIC over TCP for WAN
connections, for example. Both sides need to be similarly configured for
this to work properly.
The default priority order remains the same as previously (TCP, QUIC,
Relay, with LAN better than WAN).
To make this happen I made each dialer & listener more priority aware,
and moved the check for whether a connection is LAN or not into the
dialer / listener -- this is the new "lanChecker" type that's passed
around.
Allow the watcher delay to take fractional values, effectively allowing
for much shorter delays. The minimum value is limited at 0.01, which
effectively translates to 10ms. This is required in order to guarantee
that there is still enough time to aggregate multiple single change
events.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds support for syncing extended attributes on supported
filesystem on Linux, macOS, FreeBSD and NetBSD. Windows is currently
excluded because the APIs seem onerous and annoying and frankly the uses
cases seem few and far between. On Unixes this also covers ACLs as those
are stored as extended attributes.
Similar to ownership syncing this will optional & opt-in, which two
settings controlling the main behavior: one to "sync" xattrs (read &
write) and another one to "scan" xattrs (only read them so other devices
can "sync" them, but not apply any locally).
Co-authored-by: Tomasz Wilczyński <twilczynski@naver.com>
This replaces old style errors.Wrap with modern fmt.Errorf and removes
the (direct) dependency on github.com/pkg/errors. A couple of cases are
adjusted by hand as previously errors.Wrap(nil, ...) would return nil,
which is not what fmt.Errorf does.
all: Add package runtimeos for runtime.GOOS comparisons
I grew tired of hand written string comparisons. This adds generated
constants for the GOOS values, and predefined Is$OS constants that can
be iffed on. In a couple of places I rewrote trivial switch:es to if:s,
and added Illumos where we checked for Solaris (because they are
effectively the same, and if we're going to target one of them that
would be Illumos...).
This adds support for syncing ownership on Unixes and on Windows. The
scanner always picks up ownership information, but it is not applied
unless the new folder option "Sync Ownership" is set.
Ownership data is stored in a new FileInfo field called "platform data". This
is intended to hold further platform-specific data in the future
(specifically, extended attributes), which is why the whole design is a
bit overkill for just ownership.
This commit replaces `os.MkdirTemp` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `os.MkdirTemp`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Staggered File Versioning used to have its own cleanInterval that
controlled how often file versions were cleaned. Nowadays, there is a
seperate setting called cleanupIntervalS responsible for the cleanup,
which applies to all File Versioning (except External). Thus, remove the
unneeded code and don't set the param up on new folders anymore.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* cmd/syncthing: Remove unnecessary function arguments.
The openGUI() function does not need a device ID to work, and there is
only one caller anyway which uses EmptyDeviceID.
The loadOrDefaultConfig() function is always called with the same
dummy values.
* cmd/syncthing: Avoid misleading info messages from monitor process.
In order to check whether panic reporting is enabled, the monitor
process utilizes the loadOrDefaultConfig() function. In case there is
no config file yet, info messages may be logged during creation if the
config Wrapper, which is discarded immediately after.
Stop using the DefaultConfig() utility function from lib/syncthing and
directly generate a minimal config instead to avoid these.
Add comments to loadOrDefaultConfig() explaining its limited purpose.
* cmd/syncthing/generate: Always write updated config file.
Previously, an existing config file was left untouched unless either
of the --gui-user or --gui-password options was given. Remove that
condition and simplify the checking code.
* lib/config: Factor out ProbeFreePorts().
* cmd/syncthing: Add option --skip-port-probing.
Applies to both the "generate" and "serve" subcommands, as well as the
deprecated --generate option, just as the --no-default-folder flag.
What hash is used to store the password should ideally be an
implementation detail, so that every user of the GUIConfiguration
object automatically agrees on how to handle it. That is currently
distribututed over the confighandler.go and api_auth.go files, plus
tests.
Add the SetHasedPassword() / CompareHashedPassword() API to keep the
hashing method encapsulated. Add a separate test for it and adjust
other users and tests. Remove all deprecated imports of the bcrypt
package.
The current detection is flawed, because it looks for a few specific
file systems like "msdos" or "fat" to set the mtime window, while in
reality Android seems to report names like "fuseblk", which can stand
for fat, ext4, or even f2fs.
At the moment, we set the mtime window only for a few known names used
for the fat filesystem. With this change, we take a safer approach of
always setting the time window unless we explicitly detect file systems
like ext2/ext3/ex4, which are known not to experience issues with moving
timestamps on Android.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This makes us use TLS 1.3+ on sync connections by default. A new option
`insecureAllowOldTLSVersions` exists to allow communication with TLS
1.2-only clients (roughly Syncthing 1.2.2 and older). Even with that
option set you get a slightly simplified setup, with the cipher suite
order fixed instead of auto detected.
Emil Lundberg
Jakob Borg
Keith Harrison
Simon Frei
Dimitri Papadopoulos Orfanos
tomasz1986
greatroar
luzpaz
deepsource-autofix[bot]
Eng Zer Jun
André Colomb