UDisksNVMeController

UDisksNVMeController — Generated C code for the org.freedesktop.UDisks2.NVMe.Controller D-Bus interface

Functions

GDBusInterfaceInfo * udisks_nvme_controller_interface_info ()
guint udisks_nvme_controller_override_properties ()
void udisks_nvme_controller_call_smart_get_attributes ()
gboolean udisks_nvme_controller_call_smart_get_attributes_finish ()
gboolean udisks_nvme_controller_call_smart_get_attributes_sync ()
void udisks_nvme_controller_complete_smart_get_attributes ()
void udisks_nvme_controller_call_smart_update ()
gboolean udisks_nvme_controller_call_smart_update_finish ()
gboolean udisks_nvme_controller_call_smart_update_sync ()
void udisks_nvme_controller_complete_smart_update ()
void udisks_nvme_controller_call_smart_selftest_start ()
gboolean udisks_nvme_controller_call_smart_selftest_start_finish ()
gboolean udisks_nvme_controller_call_smart_selftest_start_sync ()
void udisks_nvme_controller_complete_smart_selftest_start ()
void udisks_nvme_controller_call_smart_selftest_abort ()
gboolean udisks_nvme_controller_call_smart_selftest_abort_finish ()
gboolean udisks_nvme_controller_call_smart_selftest_abort_sync ()
void udisks_nvme_controller_complete_smart_selftest_abort ()
void udisks_nvme_controller_call_sanitize_start ()
gboolean udisks_nvme_controller_call_sanitize_start_finish ()
gboolean udisks_nvme_controller_call_sanitize_start_sync ()
void udisks_nvme_controller_complete_sanitize_start ()
guint16 udisks_nvme_controller_get_controller_id ()
const gchar * udisks_nvme_controller_get_fguid ()
const gchar * udisks_nvme_controller_get_nvme_revision ()
gint udisks_nvme_controller_get_sanitize_percent_remaining ()
const gchar * udisks_nvme_controller_get_sanitize_status ()
const gchar *const * udisks_nvme_controller_get_smart_critical_warning ()
guint64 udisks_nvme_controller_get_smart_power_on_hours ()
gint udisks_nvme_controller_get_smart_selftest_percent_remaining ()
const gchar * udisks_nvme_controller_get_smart_selftest_status ()
guint16 udisks_nvme_controller_get_smart_temperature ()
guint64 udisks_nvme_controller_get_smart_updated ()
const gchar * udisks_nvme_controller_get_state ()
const gchar * udisks_nvme_controller_get_subsystem_nqn ()
guint64 udisks_nvme_controller_get_unallocated_capacity ()
gchar * udisks_nvme_controller_dup_fguid ()
gchar * udisks_nvme_controller_dup_nvme_revision ()
gchar * udisks_nvme_controller_dup_sanitize_status ()
gchar ** udisks_nvme_controller_dup_smart_critical_warning ()
gchar * udisks_nvme_controller_dup_state ()
gchar * udisks_nvme_controller_dup_smart_selftest_status ()
gchar * udisks_nvme_controller_dup_subsystem_nqn ()
void udisks_nvme_controller_set_controller_id ()
void udisks_nvme_controller_set_fguid ()
void udisks_nvme_controller_set_nvme_revision ()
void udisks_nvme_controller_set_sanitize_percent_remaining ()
void udisks_nvme_controller_set_sanitize_status ()
void udisks_nvme_controller_set_smart_critical_warning ()
void udisks_nvme_controller_set_smart_power_on_hours ()
void udisks_nvme_controller_set_smart_selftest_percent_remaining ()
void udisks_nvme_controller_set_smart_selftest_status ()
void udisks_nvme_controller_set_smart_temperature ()
void udisks_nvme_controller_set_smart_updated ()
void udisks_nvme_controller_set_state ()
void udisks_nvme_controller_set_subsystem_nqn ()
void udisks_nvme_controller_set_unallocated_capacity ()
void udisks_nvme_controller_proxy_new ()
UDisksNVMeController * udisks_nvme_controller_proxy_new_finish ()
UDisksNVMeController * udisks_nvme_controller_proxy_new_sync ()
void udisks_nvme_controller_proxy_new_for_bus ()
UDisksNVMeController * udisks_nvme_controller_proxy_new_for_bus_finish ()
UDisksNVMeController * udisks_nvme_controller_proxy_new_for_bus_sync ()
UDisksNVMeController * udisks_nvme_controller_skeleton_new ()

Types and Values

Object Hierarchy

    GInterface
    ╰── UDisksNVMeController
    GObject
    ╰── GDBusInterfaceSkeleton
        ╰── UDisksNVMeControllerSkeleton
            ╰── UDisksLinuxNVMeController

Prerequisites

UDisksNVMeController requires GObject.

Implemented Interfaces

UDisksNVMeControllerSkeleton implements GDBusInterface and UDisksNVMeController.

Known Implementations

UDisksNVMeController is implemented by UDisksLinuxNVMeController and UDisksNVMeControllerSkeleton.

Description

This section contains code for working with the org.freedesktop.UDisks2.NVMe.Controller D-Bus interface in C.

Functions

udisks_nvme_controller_interface_info ()

GDBusInterfaceInfo *
udisks_nvme_controller_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.NVMe.Controller D-Bus interface.

Returns

A GDBusInterfaceInfo. Do not free.

[transfer none]


udisks_nvme_controller_override_properties ()

guint
udisks_nvme_controller_override_properties
                               (GObjectClass *klass,
                                guint property_id_begin);

Overrides all GObject properties in the UDisksNVMeController interface for a concrete class. The properties are overridden in the order they are defined.

Parameters

klass

The class structure for a GObject derived class.

 

property_id_begin

The property id to assign to the first overridden property.

 

Returns

The last property id.


udisks_nvme_controller_call_smart_get_attributes ()

void
udisks_nvme_controller_call_smart_get_attributes
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartGetAttributes() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_call_smart_get_attributes_finish() to get the result of the operation.

See udisks_nvme_controller_call_smart_get_attributes_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.10.0


udisks_nvme_controller_call_smart_get_attributes_finish ()

gboolean
udisks_nvme_controller_call_smart_get_attributes_finish
                               (UDisksNVMeController *proxy,
                                GVariant **out_attributes,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_call_smart_get_attributes().

Parameters

proxy

A UDisksNVMeControllerProxy.

 

out_attributes

Return location for return parameter or NULL to ignore.

[out][optional]

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_call_smart_get_attributes().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_call_smart_get_attributes_sync ()

gboolean
udisks_nvme_controller_call_smart_get_attributes_sync
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GVariant **out_attributes,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartGetAttributes() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_nvme_controller_call_smart_get_attributes() for the asynchronous version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

out_attributes

Return location for return parameter or NULL to ignore.

[out][optional]

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_complete_smart_get_attributes ()

void
udisks_nvme_controller_complete_smart_get_attributes
                               (UDisksNVMeController *object,
                                GDBusMethodInvocation *invocation,
                                GVariant *attributes);

Helper function used in service implementations to finish handling invocations of the SmartGetAttributes() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksNVMeController.

 

invocation

A GDBusMethodInvocation.

[transfer full]

attributes

Parameter to return.

 

Since: 2.10.0


udisks_nvme_controller_call_smart_update ()

void
udisks_nvme_controller_call_smart_update
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartUpdate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_call_smart_update_finish() to get the result of the operation.

See udisks_nvme_controller_call_smart_update_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.10.0


udisks_nvme_controller_call_smart_update_finish ()

gboolean
udisks_nvme_controller_call_smart_update_finish
                               (UDisksNVMeController *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_call_smart_update().

Parameters

proxy

A UDisksNVMeControllerProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_call_smart_update().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_call_smart_update_sync ()

gboolean
udisks_nvme_controller_call_smart_update_sync
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartUpdate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_nvme_controller_call_smart_update() for the asynchronous version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_complete_smart_update ()

void
udisks_nvme_controller_complete_smart_update
                               (UDisksNVMeController *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartUpdate() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksNVMeController.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_start ()

void
udisks_nvme_controller_call_smart_selftest_start
                               (UDisksNVMeController *proxy,
                                const gchar *arg_type,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartSelftestStart() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_call_smart_selftest_start_finish() to get the result of the operation.

See udisks_nvme_controller_call_smart_selftest_start_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_type

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_start_finish ()

gboolean
udisks_nvme_controller_call_smart_selftest_start_finish
                               (UDisksNVMeController *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_call_smart_selftest_start().

Parameters

proxy

A UDisksNVMeControllerProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_call_smart_selftest_start().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_start_sync ()

gboolean
udisks_nvme_controller_call_smart_selftest_start_sync
                               (UDisksNVMeController *proxy,
                                const gchar *arg_type,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartSelftestStart() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_nvme_controller_call_smart_selftest_start() for the asynchronous version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_type

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_complete_smart_selftest_start ()

void
udisks_nvme_controller_complete_smart_selftest_start
                               (UDisksNVMeController *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartSelftestStart() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksNVMeController.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_abort ()

void
udisks_nvme_controller_call_smart_selftest_abort
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartSelftestAbort() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_call_smart_selftest_abort_finish() to get the result of the operation.

See udisks_nvme_controller_call_smart_selftest_abort_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_abort_finish ()

gboolean
udisks_nvme_controller_call_smart_selftest_abort_finish
                               (UDisksNVMeController *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_call_smart_selftest_abort().

Parameters

proxy

A UDisksNVMeControllerProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_call_smart_selftest_abort().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_call_smart_selftest_abort_sync ()

gboolean
udisks_nvme_controller_call_smart_selftest_abort_sync
                               (UDisksNVMeController *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartSelftestAbort() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_nvme_controller_call_smart_selftest_abort() for the asynchronous version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_complete_smart_selftest_abort ()

void
udisks_nvme_controller_complete_smart_selftest_abort
                               (UDisksNVMeController *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartSelftestAbort() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksNVMeController.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.10.0


udisks_nvme_controller_call_sanitize_start ()

void
udisks_nvme_controller_call_sanitize_start
                               (UDisksNVMeController *proxy,
                                const gchar *arg_action,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SanitizeStart() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_call_sanitize_start_finish() to get the result of the operation.

See udisks_nvme_controller_call_sanitize_start_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_action

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.10.0


udisks_nvme_controller_call_sanitize_start_finish ()

gboolean
udisks_nvme_controller_call_sanitize_start_finish
                               (UDisksNVMeController *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_call_sanitize_start().

Parameters

proxy

A UDisksNVMeControllerProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_call_sanitize_start().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_call_sanitize_start_sync ()

gboolean
udisks_nvme_controller_call_sanitize_start_sync
                               (UDisksNVMeController *proxy,
                                const gchar *arg_action,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SanitizeStart() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_nvme_controller_call_sanitize_start() for the asynchronous version of this method.

Parameters

proxy

A UDisksNVMeControllerProxy.

 

arg_action

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.10.0


udisks_nvme_controller_complete_sanitize_start ()

void
udisks_nvme_controller_complete_sanitize_start
                               (UDisksNVMeController *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SanitizeStart() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksNVMeController.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.10.0


udisks_nvme_controller_get_controller_id ()

guint16
udisks_nvme_controller_get_controller_id
                               (UDisksNVMeController *object);

Gets the value of the "ControllerID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.


udisks_nvme_controller_get_fguid ()

const gchar *
udisks_nvme_controller_get_fguid (UDisksNVMeController *object);

Gets the value of the "FGUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_fguid() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_nvme_revision ()

const gchar *
udisks_nvme_controller_get_nvme_revision
                               (UDisksNVMeController *object);

Gets the value of the "NVMeRevision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_nvme_revision() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_sanitize_percent_remaining ()

gint
udisks_nvme_controller_get_sanitize_percent_remaining
                               (UDisksNVMeController *object);

Gets the value of the "SanitizePercentRemaining" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.

Since: 2.10.0


udisks_nvme_controller_get_sanitize_status ()

const gchar *
udisks_nvme_controller_get_sanitize_status
                               (UDisksNVMeController *object);

Gets the value of the "SanitizeStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_sanitize_status() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_smart_critical_warning ()

const gchar *const *
udisks_nvme_controller_get_smart_critical_warning
                               (UDisksNVMeController *object);

Gets the value of the "SmartCriticalWarning" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_smart_critical_warning() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_smart_power_on_hours ()

guint64
udisks_nvme_controller_get_smart_power_on_hours
                               (UDisksNVMeController *object);

Gets the value of the "SmartPowerOnHours" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.


udisks_nvme_controller_get_smart_selftest_percent_remaining ()

gint
udisks_nvme_controller_get_smart_selftest_percent_remaining
                               (UDisksNVMeController *object);

Gets the value of the "SmartSelftestPercentRemaining" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.

Since: 2.10.0


udisks_nvme_controller_get_smart_selftest_status ()

const gchar *
udisks_nvme_controller_get_smart_selftest_status
                               (UDisksNVMeController *object);

Gets the value of the "SmartSelftestStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_smart_selftest_status() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_smart_temperature ()

guint16
udisks_nvme_controller_get_smart_temperature
                               (UDisksNVMeController *object);

Gets the value of the "SmartTemperature" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.


udisks_nvme_controller_get_smart_updated ()

guint64
udisks_nvme_controller_get_smart_updated
                               (UDisksNVMeController *object);

Gets the value of the "SmartUpdated" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.


udisks_nvme_controller_get_state ()

const gchar *
udisks_nvme_controller_get_state (UDisksNVMeController *object);

Gets the value of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_state() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_subsystem_nqn ()

const gchar *
udisks_nvme_controller_get_subsystem_nqn
                               (UDisksNVMeController *object);

Gets the value of the "SubsystemNQN" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_nvme_controller_dup_subsystem_nqn() if on another thread.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_nvme_controller_get_unallocated_capacity ()

guint64
udisks_nvme_controller_get_unallocated_capacity
                               (UDisksNVMeController *object);

Gets the value of the "UnallocatedCapacity" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value.


udisks_nvme_controller_dup_fguid ()

gchar *
udisks_nvme_controller_dup_fguid (UDisksNVMeController *object);

Gets a copy of the "FGUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_dup_nvme_revision ()

gchar *
udisks_nvme_controller_dup_nvme_revision
                               (UDisksNVMeController *object);

Gets a copy of the "NVMeRevision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_dup_sanitize_status ()

gchar *
udisks_nvme_controller_dup_sanitize_status
                               (UDisksNVMeController *object);

Gets a copy of the "SanitizeStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_dup_smart_critical_warning ()

gchar **
udisks_nvme_controller_dup_smart_critical_warning
                               (UDisksNVMeController *object);

Gets a copy of the "SmartCriticalWarning" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_strfreev().

[transfer full][nullable]


udisks_nvme_controller_dup_state ()

gchar *
udisks_nvme_controller_dup_state (UDisksNVMeController *object);

Gets a copy of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_dup_smart_selftest_status ()

gchar *
udisks_nvme_controller_dup_smart_selftest_status
                               (UDisksNVMeController *object);

Gets a copy of the "SmartSelftestStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_dup_subsystem_nqn ()

gchar *
udisks_nvme_controller_dup_subsystem_nqn
                               (UDisksNVMeController *object);

Gets a copy of the "SubsystemNQN" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_nvme_controller_set_controller_id ()

void
udisks_nvme_controller_set_controller_id
                               (UDisksNVMeController *object,
                                guint16 value);

Sets the "ControllerID" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_fguid ()

void
udisks_nvme_controller_set_fguid (UDisksNVMeController *object,
                                  const gchar *value);

Sets the "FGUID" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_nvme_revision ()

void
udisks_nvme_controller_set_nvme_revision
                               (UDisksNVMeController *object,
                                const gchar *value);

Sets the "NVMeRevision" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_sanitize_percent_remaining ()

void
udisks_nvme_controller_set_sanitize_percent_remaining
                               (UDisksNVMeController *object,
                                gint value);

Sets the "SanitizePercentRemaining" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

Since: 2.10.0


udisks_nvme_controller_set_sanitize_status ()

void
udisks_nvme_controller_set_sanitize_status
                               (UDisksNVMeController *object,
                                const gchar *value);

Sets the "SanitizeStatus" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_smart_critical_warning ()

void
udisks_nvme_controller_set_smart_critical_warning
                               (UDisksNVMeController *object,
                                const gchar *const *value);

Sets the "SmartCriticalWarning" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_smart_power_on_hours ()

void
udisks_nvme_controller_set_smart_power_on_hours
                               (UDisksNVMeController *object,
                                guint64 value);

Sets the "SmartPowerOnHours" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_smart_selftest_percent_remaining ()

void
udisks_nvme_controller_set_smart_selftest_percent_remaining
                               (UDisksNVMeController *object,
                                gint value);

Sets the "SmartSelftestPercentRemaining" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

Since: 2.10.0


udisks_nvme_controller_set_smart_selftest_status ()

void
udisks_nvme_controller_set_smart_selftest_status
                               (UDisksNVMeController *object,
                                const gchar *value);

Sets the "SmartSelftestStatus" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_smart_temperature ()

void
udisks_nvme_controller_set_smart_temperature
                               (UDisksNVMeController *object,
                                guint16 value);

Sets the "SmartTemperature" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_smart_updated ()

void
udisks_nvme_controller_set_smart_updated
                               (UDisksNVMeController *object,
                                guint64 value);

Sets the "SmartUpdated" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_state ()

void
udisks_nvme_controller_set_state (UDisksNVMeController *object,
                                  const gchar *value);

Sets the "State" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_subsystem_nqn ()

void
udisks_nvme_controller_set_subsystem_nqn
                               (UDisksNVMeController *object,
                                const gchar *value);

Sets the "SubsystemNQN" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_set_unallocated_capacity ()

void
udisks_nvme_controller_set_unallocated_capacity
                               (UDisksNVMeController *object,
                                guint64 value);

Sets the "UnallocatedCapacity" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksNVMeController.

 

value

The value to set.

 

udisks_nvme_controller_proxy_new ()

void
udisks_nvme_controller_proxy_new (GDBusConnection *connection,
                                  GDBusProxyFlags flags,
                                  const gchar *name,
                                  const gchar *object_path,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.NVMe.Controller. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_proxy_new_finish() to get the result of the operation.

See udisks_nvme_controller_proxy_new_sync() for the synchronous, blocking version of this constructor.

Parameters

connection

A GDBusConnection.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique) or NULL if connection is not a message bus connection.

[nullable]

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied.

 

user_data

User data to pass to callback .

 

udisks_nvme_controller_proxy_new_finish ()

UDisksNVMeController *
udisks_nvme_controller_proxy_new_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_proxy_new().

Parameters

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_proxy_new().

 

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksNVMeControllerProxy]


udisks_nvme_controller_proxy_new_sync ()

UDisksNVMeController *
udisks_nvme_controller_proxy_new_sync (GDBusConnection *connection,
                                       GDBusProxyFlags flags,
                                       const gchar *name,
                                       const gchar *object_path,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.NVMe.Controller. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_nvme_controller_proxy_new() for the asynchronous version of this constructor.

Parameters

connection

A GDBusConnection.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique) or NULL if connection is not a message bus connection.

[nullable]

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksNVMeControllerProxy]


udisks_nvme_controller_proxy_new_for_bus ()

void
udisks_nvme_controller_proxy_new_for_bus
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Like udisks_nvme_controller_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_nvme_controller_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_nvme_controller_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

Parameters

bus_type

A GBusType.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique).

 

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied.

 

user_data

User data to pass to callback .

 

udisks_nvme_controller_proxy_new_for_bus_finish ()

UDisksNVMeController *
udisks_nvme_controller_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_nvme_controller_proxy_new_for_bus().

Parameters

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_nvme_controller_proxy_new_for_bus().

 

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksNVMeControllerProxy]


udisks_nvme_controller_proxy_new_for_bus_sync ()

UDisksNVMeController *
udisks_nvme_controller_proxy_new_for_bus_sync
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_nvme_controller_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_nvme_controller_proxy_new_for_bus() for the asynchronous version of this constructor.

Parameters

bus_type

A GBusType.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique).

 

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksNVMeControllerProxy]


udisks_nvme_controller_skeleton_new ()

UDisksNVMeController *
udisks_nvme_controller_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.NVMe.Controller.

Returns

The skeleton object.

[transfer full][type UDisksNVMeControllerSkeleton]

Types and Values

UDisksNVMeController

typedef struct _UDisksNVMeController UDisksNVMeController;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.NVMe.Controller.


struct UDisksNVMeControllerIface

struct UDisksNVMeControllerIface {
  GTypeInterface parent_iface;

  guint16  (*get_controller_id) (UDisksNVMeController *object);

  const gchar * (*get_fguid) (UDisksNVMeController *object);

  const gchar * (*get_nvme_revision) (UDisksNVMeController *object);

  const gchar * (*get_sanitize_status) (UDisksNVMeController *object);

  const gchar *const * (*get_smart_critical_warning) (UDisksNVMeController *object);

  guint64  (*get_smart_power_on_hours) (UDisksNVMeController *object);

  const gchar * (*get_smart_selftest_status) (UDisksNVMeController *object);

  guint16  (*get_smart_temperature) (UDisksNVMeController *object);

  guint64  (*get_smart_updated) (UDisksNVMeController *object);

  const gchar * (*get_state) (UDisksNVMeController *object);

  const gchar * (*get_subsystem_nqn) (UDisksNVMeController *object);

  guint64  (*get_unallocated_capacity) (UDisksNVMeController *object);

  gboolean (*handle_sanitize_start) (
    UDisksNVMeController *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_action,
    GVariant *arg_options);

  gboolean (*handle_smart_get_attributes) (
    UDisksNVMeController *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_smart_selftest_abort) (
    UDisksNVMeController *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_smart_selftest_start) (
    UDisksNVMeController *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type,
    GVariant *arg_options);

  gboolean (*handle_smart_update) (
    UDisksNVMeController *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gint  (*get_sanitize_percent_remaining) (UDisksNVMeController *object);

  gint  (*get_smart_selftest_percent_remaining) (UDisksNVMeController *object);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.NVMe.Controller.

Members

GTypeInterface parent_iface;

The parent interface.

 

get_controller_id ()

Getter for the “controller-id” property.

 

get_fguid ()

Getter for the “fguid” property.

 

get_nvme_revision ()

Getter for the “nvme-revision” property.

 

get_sanitize_status ()

Getter for the “sanitize-status” property.

 

get_smart_critical_warning ()

Getter for the “smart-critical-warning” property.

 

get_smart_power_on_hours ()

Getter for the “smart-power-on-hours” property.

 

get_smart_selftest_status ()

Getter for the “smart-selftest-status” property.

 

get_smart_temperature ()

Getter for the “smart-temperature” property.

 

get_smart_updated ()

Getter for the “smart-updated” property.

 

get_state ()

Getter for the “state” property.

 

get_subsystem_nqn ()

Getter for the “subsystem-nqn” property.

 

get_unallocated_capacity ()

Getter for the “unallocated-capacity” property.

 

handle_sanitize_start ()

Handler for the “handle-sanitize-start” signal.

 

handle_smart_get_attributes ()

Handler for the “handle-smart-get-attributes” signal.

 

handle_smart_selftest_abort ()

Handler for the “handle-smart-selftest-abort” signal.

 

handle_smart_selftest_start ()

Handler for the “handle-smart-selftest-start” signal.

 

handle_smart_update ()

Handler for the “handle-smart-update” signal.

 

get_sanitize_percent_remaining ()

Getter for the “sanitize-percent-remaining” property.

 

get_smart_selftest_percent_remaining ()

Getter for the “smart-selftest-percent-remaining” property.

 

struct UDisksNVMeControllerProxy

struct UDisksNVMeControllerProxy {
};

The UDisksNVMeControllerProxy structure contains only private data and should only be accessed using the provided API.


struct UDisksNVMeControllerProxyClass

struct UDisksNVMeControllerProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksNVMeControllerProxy.

Members


struct UDisksNVMeControllerSkeleton

struct UDisksNVMeControllerSkeleton;

The UDisksNVMeControllerSkeleton structure contains only private data and should only be accessed using the provided API.


struct UDisksNVMeControllerSkeletonClass

struct UDisksNVMeControllerSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksNVMeControllerSkeleton.

Members