RangeSlider QML Type

Used to select a range of values by sliding two handles along a track. More...

Import Statement: import QtQuick.Controls
Inherits:

Control

Properties

Signals

Methods

Detailed Description

RangeSlider is used to select a range specified by two values, by sliding each handle along a track.

In the example below, custom from and to values are set, and the initial positions of the first and second handles are set:

 RangeSlider {
     from: 1
     to: 100
     first.value: 25
     second.value: 75
 }

In order to perform an action when the value for a particular handle changes, use the following syntax:

 first.onMoved: console.log("first.value changed to " + first.value)

The first.position and second.position properties are expressed as fractions of the control's size, in the range 0.0 - 1.0. The first.visualPosition and second.visualPosition properties are the same, except that they are reversed in a right-to-left application. The visualPosition is useful for positioning the handles when styling RangeSlider. In the example above, first.visualPosition will be 0.24 in a left-to-right application, and 0.76 in a right-to-left application.

For a slider that allows the user to select a single value, see Slider.

See also Customizing RangeSlider, Input Controls, and Focus Management in Qt Quick Controls.

Property Documentation

first group

first.handle : Item

first.hovered : bool

first.implicitHandleHeight : real

first.implicitHandleWidth : real

first.position : real

first.pressed : bool

first.value : real

first.visualPosition : real

PropertyDescription
valueThis property holds the value of the first handle in the range from - to.

If from is greater than to, the value of the first handle must be greater than the second, and vice versa.

The default value is 0.0.

handleThis property holds the first handle item.
visualPositionThis property holds the visual position of the first handle.

The position is expressed as a fraction of the control's size, in the range 0.0 - 1.0. When the control is mirrored, the value is equal to 1.0 - position. This makes the value suitable for visualizing the slider, taking right-to-left support into account.

positionThis property holds the logical position of the first handle.

The position is expressed as a fraction of the control's size, in the range 0.0 - 1.0. For visualizing a slider, the right-to-left aware visualPosition should be used instead.

pressedThis property holds whether the first handle is pressed by either touch, mouse, or keys.
hoveredThis property holds whether the first handle is hovered. This property was introduced in QtQuick.Controls 2.1.
implicitHandleWidthThis property holds the implicit width of the first handle. This property was introduced in QtQuick.Controls 2.5.
implicitHandleHeightThis property holds the implicit height of the first handle. This property was introduced in QtQuick.Controls 2.5.

See also first.moved(), first.increase(), and first.decrease().


from : real

This property holds the starting value for the range. The default value is 0.0.

See also to, first.value, and second.value.


horizontal : bool [read-only, since QtQuick.Controls 2.3 (Qt 5.10)]

This property holds whether the slider is horizontal.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also orientation.


live : bool [since QtQuick.Controls 2.2 (Qt 5.9)]

This property holds whether the slider provides live updates for the first.value and second.value properties while the respective handles are dragged.

The default value is true.

This property was introduced in QtQuick.Controls 2.2 (Qt 5.9).

See also first.value and second.value.


orientation : enumeration

This property holds the orientation.

Possible values:

ConstantDescription
Qt.HorizontalHorizontal (default)
Qt.VerticalVertical

See also horizontal and vertical.


second group

second.handle : Item

second.hovered : bool

second.implicitHandleHeight : real

second.implicitHandleWidth : real

second.position : real

second.pressed : bool

second.value : real

second.visualPosition : real

PropertyDescription
valueThis property holds the value of the second handle in the range from - to.

If from is greater than to, the value of the first handle must be greater than the second, and vice versa.

The default value is 0.0.

handleThis property holds the second handle item.
visualPositionThis property holds the visual position of the second handle.

The position is expressed as a fraction of the control's size, in the range 0.0 - 1.0. When the control is mirrored, the value is equal to 1.0 - position. This makes the value suitable for visualizing the slider, taking right-to-left support into account.

positionThis property holds the logical position of the second handle.

The position is expressed as a fraction of the control's size, in the range 0.0 - 1.0. For visualizing a slider, the right-to-left aware visualPosition should be used instead.

pressedThis property holds whether the second handle is pressed by either touch, mouse, or keys.
hoveredThis property holds whether the second handle is hovered. This property was introduced in QtQuick.Controls 2.1.
implicitHandleWidthThis property holds the implicit width of the second handle. This property was introduced in QtQuick.Controls 2.5.
implicitHandleHeightThis property holds the implicit height of the second handle. This property was introduced in QtQuick.Controls 2.5.

See also second.moved(), second.increase(), and second.decrease().


snapMode : enumeration

This property holds the snap mode.

The snap mode determines how the slider handles behave with regards to the stepSize.

Possible values:

ConstantDescription
RangeSlider.NoSnapThe slider does not snap (default).
RangeSlider.SnapAlwaysThe slider snaps while the handle is dragged.
RangeSlider.SnapOnReleaseThe slider does not snap while being dragged, but only after the handle is released.

For visual explanations of the various modes, see the snapMode documentation of Slider.

See also stepSize.


stepSize : real

This property holds the step size. The default value is 0.0.

See also snapMode, first.increase(), and first.decrease().


to : real

This property holds the end value for the range. The default value is 1.0.

See also from, first.value, and second.value.


touchDragThreshold : qreal [since QtQuick.Controls 2.5 (Qt 5.12)]

This property holds the threshold (in logical pixels) at which a touch drag event will be initiated. The mouse drag threshold won't be affected. The default value is Qt.styleHints.startDragDistance.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also QStyleHints.


vertical : bool [read-only, since QtQuick.Controls 2.3 (Qt 5.10)]

This property holds whether the slider is vertical.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also orientation.


Signal Documentation

[since QtQuick.Controls 2.5] void first.moved()

[since QtQuick.Controls 2.5] void second.moved()

This signal is emitted when either the first or second handle has been interactively moved by the user by either touch, mouse, or keys.

This QML signal was introduced in QtQuick.Controls 2.5.

See also first and second.


Method Documentation

void first.decrease()

Decreases the value of the handle by stepSize, or 0.1 if stepSize is not defined.

See also first.


void first.increase()

Increases the value of the handle by stepSize, or 0.1 if stepSize is not defined.

See also first.


void second.decrease()

Decreases the value of the handle by stepSize, or 0.1 if stepSize is not defined.

See also second.


void second.increase()

Increases the value of the handle by stepSize, or 0.1 if stepSize is not defined.

See also second.


void setValues(real firstValue, real secondValue)

Sets first.value and second.value with the given arguments.

If to is larger than from and firstValue is larger than secondValue, firstValue will be clamped to secondValue.

If from is larger than to and secondValue is larger than firstValue, secondValue will be clamped to firstValue.

This function may be necessary to set the first and second values after the control has been completed, as there is a circular dependency between firstValue and secondValue which can cause assigned values to be clamped to each other.

See also stepSize.


[since QtQuick.Controls 2.5 (Qt 5.12)] real valueAt(real position)

Returns the value for the given position.

This method was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also first.value, second.value, first.position, second.position, and live.