<QtMath> - Generic Math Functions

The <QtMath> header file provides various math functions. More...

Header: #include <QtMath>

Functions

auto qAcos(T v)
auto qAsin(T v)
auto qAtan2(T1 y, T2 x)
auto qAtan(T v)
int qCeil(T v)
auto qCos(T v)
float qDegreesToRadians(float degrees)
double qDegreesToRadians(double degrees)
(since 6.0) long double qDegreesToRadians(long double degrees)
auto qExp(T v)
auto qFabs(T v)
int qFloor(T v)
(since 6.1) auto qHypot(Tx x, Ty y)
(since 6.1) auto qHypot(Tx x, Ty y, Tz z)
(since 6.1) auto qHypot(F first, Fs... rest)
auto qLn(T v)
quint32 qNextPowerOfTwo(quint32 value)
quint32 qNextPowerOfTwo(qint32 value)
quint64 qNextPowerOfTwo(quint64 value)
quint64 qNextPowerOfTwo(qint64 value)
auto qPow(T1 x, T2 y)
float qRadiansToDegrees(float radians)
double qRadiansToDegrees(double radians)
(since 6.0) long double qRadiansToDegrees(long double radians)
auto qSin(T v)
auto qSqrt(T v)
auto qTan(T v)

Detailed Description

These functions are partly convenience definitions for basic math operations not available in the C or Standard Template Libraries.

The header also ensures some constants specified in POSIX, but not present in C++ standards (so absent from <math.h> on some platforms), are defined:

ConstantDescription
M_EThe base of the natural logarithms, e = exp(1)
M_LOG2EThe base-two logarithm of e
M_LOG10EThe base-ten logarithm of e
M_LN2The natural logarithm of two
M_LN10The natural logarithm of ten
M_PIThe ratio of a circle's circumference to diameter, π
M_PI_2Half M_PI, π / 2
M_PI_4Quarter M_PI, π / 4
M_1_PIThe inverse of M_PI, 1 / π
M_2_PITwice the inverse of M_PI, 2 / π
M_2_SQRTPITwo divided by the square root of pi, 2 / √π
M_SQRT2The square root of two, √2
M_SQRT1_2The square roof of half, 1 / √2

Function Documentation

template <typename T> auto qAcos(T v)

Returns the arccosine of v as an angle in radians. Arccosine is the inverse operation of cosine.

See also qAtan(), qAsin(), and qCos().

template <typename T> auto qAsin(T v)

Returns the arcsine of v as an angle in radians. Arcsine is the inverse operation of sine.

See also qSin(), qAtan(), and qAcos().

template <typename T1, typename T2> auto qAtan2(T1 y, T2 x)

Returns the arctangent of a point specified by the coordinates y and x. This function will return the angle (argument) of that point.

See also qAtan() and qHypot().

template <typename T> auto qAtan(T v)

Returns the arctangent of v as an angle in radians. Arctangent is the inverse operation of tangent.

See also qTan(), qAcos(), and qAsin().

template <typename T> int qCeil(T v)

Returns the ceiling of the value v.

The ceiling is the smallest integer that is not less than v. For example, if v is 41.2, then the ceiling is 42.

See also qFloor().

template <typename T> auto qCos(T v)

Returns the cosine of an angle v in radians.

See also qSin() and qTan().

[constexpr] float qDegreesToRadians(float degrees)

This function converts the degrees in float to radians.

Example:

 float degrees = 180.0f
 float radians = qDegreesToRadians(degrees)

See also qRadiansToDegrees().

[constexpr] double qDegreesToRadians(double degrees)

This function converts the degrees in double to radians.

Example:

 double degrees = 180.0
 double radians = qDegreesToRadians(degrees)

See also qRadiansToDegrees().

[constexpr, since 6.0] long double qDegreesToRadians(long double degrees)

This function converts the degrees in double to radians.

This function was introduced in Qt 6.0.

See also qRadiansToDegrees().

template <typename T> auto qExp(T v)

Returns the exponential function of e to the power of v.

See also qLn().

template <typename T> auto qFabs(T v)

Returns the absolute value of v.

template <typename T> int qFloor(T v)

Returns the floor of the value v.

The floor is the largest integer that is not greater than v. For example, if v is 41.2, then the floor is 41.

See also qCeil().

[since 6.1] template <typename Tx, typename Ty> auto qHypot(Tx x, Ty y)

This is an overloaded function.

Returns the distance of a point (x, y) from the origin (0, 0).

This is qSqrt(x * x + y * y), optimized. In particular, underflow and overflow may be avoided.

Accepts any mix of numeric types, returning the same floating-point type as std::hypot(). If either parameter is infinite, so is the result; otherwise, if either is a NaN, so is the result.

This function was introduced in Qt 6.1.

See also qSqrt() and qAtan2().

[since 6.1] template <typename Tx, typename Ty, typename Tz> auto qHypot(Tx x, Ty y, Tz z)

This is an overloaded function.

Returns the distance of a point (x, y, z) from the origin (0, 0, 0).

This is qSqrt(x * x + y * y + z * z), optimized where supported. In particular, underflow and overflow may be avoided.

Accepts any mix of numeric types, returning the same floating-point type as std::hypot(). If any parameter is infinite, so is the result; otherwise, if any is NaN, so is the result.

This function was introduced in Qt 6.1.

See also qSqrt().

[since 6.1] template <typename F, typename... Fs> auto qHypot(F first, Fs... rest)

Returns the distance from origin in arbitrarily many dimensions

This is as for the two-argument and three-argument forms, supported by std::hypot(), but with as many numeric parameters as you care to pass to it. Uses first and each of the rest as coordinates, performing a calculation equivalent to squaring each, summing and returning the square root, save that underflow and overflow are avoided as far as possible.

This function was introduced in Qt 6.1.

See also qSqrt().

template <typename T> auto qLn(T v)

Returns the natural logarithm of v. Natural logarithm uses base e.

See also qExp().

[constexpr] quint32 qNextPowerOfTwo(quint32 value)

This function returns the nearest power of two greater than value. For 0 it returns 1, and for values larger than or equal to 2^31 the result is undefined.

[constexpr] quint32 qNextPowerOfTwo(qint32 value)

This is an overloaded function.

This function returns the nearest power of two greater than value. For negative values the result is undefined.

[constexpr] quint64 qNextPowerOfTwo(quint64 value)

This function returns the nearest power of two greater than value. For 0 it returns 1, and for values larger than or equal to 2^63 the result is undefined.

[constexpr] quint64 qNextPowerOfTwo(qint64 value)

This is an overloaded function.

This function returns the nearest power of two greater than value. For negative values the result is undefined.

template <typename T1, typename T2> auto qPow(T1 x, T2 y)

Returns the value of x raised to the power of y. That is, x is the base and y is the exponent.

See also qSqrt().

[constexpr] float qRadiansToDegrees(float radians)

This function converts the radians in float to degrees.

Example:

 float radians = float(M_PI)
 float degrees = qRadiansToDegrees(radians)

See also qDegreesToRadians().

[constexpr] double qRadiansToDegrees(double radians)

This function converts the radians in double to degrees.

Example:

 double radians = M_PI
 double degrees = qRadiansToDegrees(radians)

See also qDegreesToRadians().

[constexpr, since 6.0] long double qRadiansToDegrees(long double radians)

This function converts the radians in double to degrees.

This function was introduced in Qt 6.0.

See also qDegreesToRadians().

template <typename T> auto qSin(T v)

Returns the sine of the angle v in radians.

See also qCos() and qTan().

template <typename T> auto qSqrt(T v)

Returns the square root of v. This function returns a NaN if v is a negative number.

See also qPow() and qHypot().

template <typename T> auto qTan(T v)

Returns the tangent of an angle v in radians.

See also qSin() and qCos().