Release mdadm-3.3

(and  various cosmetic fixes)

Signed-off-by: NeilBrown <neilb@suse.de>

ANNOUNCE-3.3

@@ -0,0 +1,63 @@
+Subject: ANNOUNCE: mdadm 3.3 - A tools for managing md Soft RAID under Linux
+
+I am pleased to announce the availability of
+   mdadm version 3.3
+
+It is available at the usual places:
+   http://www.kernel.org/pub/linux/utils/raid/mdadm/
+and via git at
+   git://github.com/neilbrown/mdadm
+   git://neil.brown.name/mdadm
+   http://git.neil.brown.name/git/mdadm
+
+This is a major new release so don't be too surprised if there are a
+few issues.  If I hear about them they will be fixed in 3.3.1.
+git log reports nearly 500 changes since 3.2.6 so I won't list them
+all.
+
+Some highlights are:
+
+- Some array reshapes can proceed without needing backup file.
+  This is done by changing the 'data_offset' so we never need to write
+  any data back over where it was before.  If there is no "head space"
+  or "tail space" to allow data_offset to change, the old mechanism
+  with a backup file can still be used.
+- RAID10 arrays can be reshaped to change the number of devices,
+  change the chunk size, or change the layout between 'near'
+  and 'offset'.
+  This will always change data_offset, and will fail if there is no
+  room for data_offset to be moved.
+- "--assemble --update=metadata" can convert a 0.90 array to a 1.0 array.
+- bad-block-logs are supported (but not heavily tested yet)
+- "--assemble --update=revert-reshape" can be used to undo a reshape
+  that has just been started but isn't really wanted.  This is very
+  new and while it passes basic tests it cannot be guaranteed.
+- improved locking between --incremental and --assemble
+- uses systemd to run "mdmon" if systemd is configured to do that.
+- kernel names of md devices can be non-numeric. e.g. "md_home" rather than
+  "md0".  This will probably confuse lots of other tools, so you need to
+       echo CREATE names=yes >> /etc/mdadm.conf
+  or the feature will not be used.  (you also need a reasonably new kernel).
+- "--stop" can be given a kernel name instead of a device name. i.e
+     mdadm --stop md4
+  will work even if /dev/md4 doesn't exist.
+- "--detail --export" has some information about the devices in the array
+- --dump and --restore can be used to backup and restore the metadata on an
+   array.
+- Hot-replace is supported with
+     mdadm /dev/mdX --replace /dev/foo
+  and
+     mdadm /dev/mdX --replace /dev/foo --with /dev/bar
+- Config file can be a directory in which case all "*.conf" files are
+  read in lexical order.
+  Default is to read /etc/mdadm.conf and then /etc/mdadm.conf.d
+  Thus
+      echo CREATE name=yes > /etc/mdadm.conf.d/names.conf
+  will also enable the use of named md devices.
+
+- Lots of improvements to DDF support including adding support for
+  RAID10 (thanks Martin Wilck).
+
+and lots of bugfixes and other little changes.
+
+NeilBrown 3rd September 2013

Assemble.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

ChangeLog

@@ -1,6 +1,197 @@
 Please see git logs for detailed change log.
 This file just contains highlight.
 
+Changes Prior to release 3.3
+- Some array reshapes can proceed without needing backup file.
+  This is done by changing the 'data_offset' so we never need to write
+  any data back over where it was before.  If there is no "head space"
+  or "tail space" to allow data_offset to change, the old mechanism
+  with a backup file can still be used.
+- RAID10 arrays can be reshaped to change the number of devices,
+  change the chunk size, or change the layout between 'near'
+  and 'offset'.
+  This will always change data_offset, and will fail if there is no
+  room for data_offset to be moved.
+- "--assemble --update=metadata" can convert a 0.90 array to a 1.0 array.
+- bad-block-logs are supported (but not heavily tested yet)
+- "--assemble --update=revert-reshape" can be used to undo a reshape
+  that has just been started but isn't really wanted.  This is very
+  new and while it passes basic tests it cannot be guaranteed.
+- improved locking between --incremental and --assemble
+- uses systemd to run "mdmon" if systemd is configured to do that.
+- kernel names of md devices can be non-numeric. e.g. "md_home" rather than
+  "md0".  This will probably confuse lots of other tools, so you need to
+       echo CREATE names=yes >> /etc/mdadm.conf
+  or the feature will not be used.  (you also need a reasonably new kernel).
+- "--stop" can be given a kernel name instead of a device name. i.e
+     mdadm --stop md4
+  will work even if /dev/md4 doesn't exist.
+- "--detail --export" has some information about the devices in the array
+- --dump and --restore can be used to backup and restore the metadata on an
+   array.
+- Hot-replace is supported with
+     mdadm /dev/mdX --replace /dev/foo
+  and
+     mdadm /dev/mdX --replace /dev/foo --with /dev/bar
+- Config file can be a directory in which case all "*.conf" files are
+  read in lexical order.
+  Default is to read /etc/mdadm.conf and then /etc/mdadm.conf.d
+  Thus
+      echo CREATE name=yes > /etc/mdadm.conf.d/names.conf
+  will also enable the use of named md devices.
+
+- Lots of improvements to DDF support including adding support for
+  RAID10 (thanks Martin Wilck).
+
+Changes Prior to release 3.2.6
+  - There are no real stand-out fixes, just lots of little bits and pieces.
+
+Changes Prior to release 3.2.5
+  - This release primarily fixes a serious regression in 3.2.4.
+    This regression does *not* cause any risk to data.  It simply
+    means that adding a device with "--add" would sometime fail
+    when it should not.
+
+  - The fix also includes a couple of minor fixes such as making
+    the "--layout=preserve" option to "--grow" work again.
+
+
+Changes Prior to release 3.2.4
+"--oneline" log of changes is below.  Some notable ones are:
+
+ - --offroot argument to improve interactions between mdmon and initrd
+ - --prefer argument to select which /dev names to display in some
+   circumstances.
+ - relax restructions on when "--add" will be allowed
+ - Fix bug with adding write-intent-bitmap to active array
+ - Now defaults to "/run/mdadm" for storing run-time files.
+
+Changes Prior to release 3.2.3
+  - The largest single area of change is support for reshape of Intel
+    IMSM arrays (OnLine Capacity Explansion and Level Migration).
+  - Among other fixes, this now has a better chance of surviving if a
+    device fails during reshape.
+
+Changes Prior to release 3.2.2
+  - reshaping IMSM (Intel metadata) arrays is no longer 'experimental',
+    it should work properly and be largely compatible with IMSM drivers in
+    other platforms.
+  - --assume-clean can be used with --grow --size to avoid resyncing the
+    new part of the array.  This is only support with very new kernels.
+  - RAID0 arrays can have chunksize which is not a power of 2.  This has been
+    supported in the kernel for a while but is only now supprted by
+    mdadm.
+
+  - A new tool 'raid6check' is available which can check a RAID6 array,
+    or part of it, and report which device is most inconsistent with the
+    others if any stripe is inconsistent.   This is still under development
+    and does not have a man page yet.  If anyone tries it out and has any
+    questions or experience to report, they would be most welcome on
+    linux-raid@vger.kernel.org.
+
+Changes Prior to release 3.2.1
+  - policy framework
+     Policy can be expressed for moving spare devices between arrays, and
+     for how to handle hot-plugged devices.  This policy can be different
+     for devices plugged in to different controllers etc.
+     This, for example, allows a configuration where when a device is plugged
+     in it is immediately included in an md array as a hot spare and
+     possibly starts recovery immediately if an array is degraded.
+
+  - some understanding of mbr and gpt paritition tables
+     This is primarly to support the new hot-plug support.  If a
+     device is plugged in and policy suggests it should have a partition table,
+     the partition table will be copied from a suitably similar device, and
+     then the partitions will hot-plug and can then be added to md arrays.
+
+  - "--incremental --remove" can remember where a device was removed from
+    so if a device gets plugged back in the same place, special policy applies
+    to it, allowing it to be included in an array even if a general hotplug
+    will not be included.
+
+  - enhanced reshape options, including growing a RAID0 by converting to RAID4,
+    restriping, and converting back.  Also convertions between RAID0 and
+    RAID10 and between RAID1 and RAID10 are possible (with a suitably recent
+    kernel).
+
+  - spare migration for IMSM arrays.
+     Spare migration can now work across 'containers' using non-native metadata
+     and specifically Intel's IMSM arrays support spare migrations.
+
+  - OLCE and level migration for Intel IMSM arrays.
+     OnLine Capacity Expansion and level migration (e.g. RAID0 -> RAID5) is
+     supported for Intel Matrix Storage Manager arrays.
+     This support is currently 'experimental' for technical reasons.  It can
+     be enabled with "export MDADM_EXPERIMENTAL=1"
+
+  - avoid including wayward devices
+     If you split a RAID1, mount the two halves as two separate degraded RAID1s,
+     and then later bring the two back together, it is possible that the md
+     metadata won't properly show that one must over-ride the other.
+     mdadm now does extra checking to detect this possibilty and avoid
+     potentially corrupting data.
+
+  - remove any possible confusion between similar options.
+     e.g. --brief and --bitmap were mapped to 'b' and mdadm wouldn't
+     notice if one was used where the other was expected.
+
+  - allow K,M,G suffixes on chunk sizes
+
+Changes Prior to release 3.2
+ - By far the most significant change in this release related to the
+   management of reshaping arrays.  This code has been substantially
+   re-written so that it can work with 'externally managed metadata' -
+   Intel's IMSM in particular.  We now support level migration and
+   OnLine Capacity Expansion on these arrays.
+ - Policy framework.
+   Various policy statements can be made in the mdadm.conf to guide
+   the behaviour of mdadm, particular with regards to how new devices
+   are treated by "mdadm -I".
+   Depending on the 'action' associated with a device (identified by
+   its 'path') such need devices can be automatically re-added to and
+   existing array that they previously fell out off, or automatically
+   added as a spare if they appear to contain no data.
+
+ - mdadm now has a limited understanding of partition tables.  This
+   allows the policy framework to make decisions about partitioned
+   devices as well.
+
+ - --incremental --remove can be told what --path the device was on,
+   and this info will be recorded so that another device appearing at
+   the same physical location can be preferentially added to the same
+   array (provides the spare-same-slot action policy applied to the
+   path).
+
+ - A new flags "--invalid-backup" flag is available in --assemble
+   mode.  This can be used to re-assemble an array which was stopping
+   in the middle of a reshape, and for which the 'backup file' is no
+   longer available or is corrupted.  The array may have some
+   corruption in it at the point where reshape was up to, but at least
+   the rest of the array will become available.
+
+
+ - Various internal restructuring - more is needed.
+
+Changes Prior to release 3.1.5
+  - Fixes for v1.x metadata on big-endian machines.
+  - man page improvements
+  - Improve '--detail --export' when run on partitions of an md array.
+  - Fix regression with removing 'failed' or 'detached' devices.
+  - Fixes for "--assemble --force" in various unusual cases.
+  - Allow '-Y' to mean --export.  This was documented but not implemented.
+  - Various fixed for handling 'ddf' metadata.  This is now more reliable
+    but could benefit from more interoperability testing.
+  - Correctly list subarrays of a container in "--detail" output.
+  - Improve checks on whether the requested number of devices is supported
+    by the metadata - both for --create and --grow.
+  - Don't remove partitions from a device that is being included in an
+    array until we are fully committed to including it.
+  - Allow "--assemble --update=no-bitmap" so an array with a corrupt
+    bitmap can still be assembled.
+  - Don't allow --add to succeed if it looks like a "--re-add" is probably
+    wanted, but cannot succeed.  This avoids inadvertently turning
+    devices into spares when an array is failed.
+
 Changes Prior to release 3.1.4
   Two fixes related to configs that aren't using udev:
    -    Don't remove md devices which 'standard' names on --stop
@@ -9,7 +200,7 @@ Changes Prior to release 3.1.4
    -    Allow --incremental to add spares to an array
    -    Accept --no-degraded as a deprecated option rather than
             throwing an error
-   -    Return correct success status when --incrmental assembling 
+   -    Return correct success status when --incrmental assembling
         a container which does not yet have enough devices.
    -    Don't link mdadm with pthreads, only mdmon needs it.
    -    Fix compiler warning due to bad use of snprintf
@@ -41,7 +232,7 @@ Changes Prior to release 3.1.3
 Changes Prior to release 3.1.2
    -    The default metadata has change again (sorry about that).
         It is now v1.2 and will hopefully stay that way.  It turned
-        out there with boot-block issues with v1.1 which make it 
+        out there with boot-block issues with v1.1 which make it
         unsuitable for a default, though in many cases it is still
         suitable to use.
    -    Stopping a container is not permitted when members are still
@@ -64,7 +255,7 @@ Changes Prior to release 3.1.2
    -    Add section on 'scrubbing' to 'md' man page.
    -    Various command-line-option parsing improvements.
    -    ... and lots of other bug fixes.
-	
+
 Changes Prior to release 3.1.1
    -    Multiple fixes for new --grow levels including fixes for
 	serious data corruption problems.
@@ -80,10 +271,10 @@ Changes Prior to release 3.1
    -    Support --grow to change level from RAID1 -> RAID5 -> RAID6 and
         back.
    -    Support --grow to reduce the number of devices in RAID4/5/6.
-   -    Support restart of these grow options which assembling an array 
+   -    Support restart of these grow options which assembling an array
 	which is partially grown.
    -    Assorted tests of this code, and of different RAID6 layouts.
-	
+
 Changes Prior to release 3.0.3
    -    Improvements for creating arrays giving just a name, like 'foo',
 	rather than the full '/dev/md/foo'.
@@ -95,7 +286,7 @@ Changes Prior to release 3.0.3
    -    Handle merging of devices that have left an IMSM array and are
 	being re-incorporated.
    -    Add missing space in "--detail --brief" output.
-	
+
 Changes Prior to release 3.0.2
    -    Fix crash when hosthost is not set, as often happens in
 	early boot.
@@ -104,7 +295,7 @@ Changes Prior to release 3.0.1
    -    Fix various segfaults
    -    Fixed for --examine with containers
    -    Lots of other little fixes.
-	
+
 Changes Prior to release 3.0
    -    Support for externally managed metadata, specifically DDF and IMSM.
    -    Depend on udev to create entries in /dev, rather than creating them

Create.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

Detail.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

Examine.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

Grow.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

Incremental.c

@@ -2,7 +2,7 @@
  * Incremental.c - support --incremental.  Part of:
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2006-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2006-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

Manage.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

ReadMe.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify
@@ -25,10 +25,10 @@
 #include "mdadm.h"
 
 #ifndef VERSION
-#define VERSION "3.3-rc2"
+#define VERSION "3.3"
 #endif
 #ifndef VERS_DATE
-#define VERS_DATE "25th July 2013"
+#define VERS_DATE "3rd September 2013"
 #endif
 char Version[] = Name " - v" VERSION " - " VERS_DATE "\n";
 

inventory

@@ -16,12 +16,15 @@ ANNOUNCE-3.2.2
 ANNOUNCE-3.2.3
 ANNOUNCE-3.2.4
 ANNOUNCE-3.2.5
+ANNOUNCE-3.2.6
+ANNOUNCE-3.3
 Assemble.c
 Build.c
 COPYING
 ChangeLog
 Create.c
 Detail.c
+Dump.c
 Examine.c
 Grow.c
 INSTALL
@@ -99,10 +102,13 @@ super0.c
 super1.c
 swap_super.c
 sysfs.c
+systemd/
+systemd/mdmon@.service
 test
 tests/
 tests/00linear
 tests/00multipath
+tests/00names
 tests/00raid0
 tests/00raid1
 tests/00raid10
@@ -113,16 +119,25 @@ tests/01r1fail
 tests/01r5fail
 tests/01r5integ
 tests/01raid6integ
+tests/01replace
 tests/02lineargrow
 tests/02r1add
 tests/02r1grow
 tests/02r5grow
 tests/02r6grow
+tests/03assem-incr
 tests/03r0assem
 tests/03r5assem
 tests/03r5assemV1
 tests/04r0update
 tests/04r1update
+tests/04r5swap
+tests/04update-metadata
+tests/04update-uuid
+tests/05r1-add-internalbitmap
+tests/05r1-add-internalbitmap-v1a
+tests/05r1-add-internalbitmap-v1b
+tests/05r1-add-internalbitmap-v1c
 tests/05r1-bitmapfile
 tests/05r1-grow-external
 tests/05r1-grow-internal
@@ -134,13 +149,16 @@ tests/05r1-internalbitmap-v1c
 tests/05r1-n3-bitmapfile
 tests/05r1-re-add
 tests/05r1-re-add-nosuper
+tests/05r1-remove-internalbitmap
+tests/05r1-remove-internalbitmap-v1a
+tests/05r1-remove-internalbitmap-v1b
+tests/05r1-remove-internalbitmap-v1c
 tests/05r5-bitmapfile
 tests/05r5-internalbitmap
 tests/05r6-bitmapfile
+tests/05r6tor0
 tests/06name
-tests/06r5swap
 tests/06sysfs
-tests/06update-uuid
 tests/06wrmostly
 tests/07autoassemble
 tests/07autodetect
@@ -148,11 +166,20 @@ tests/07changelevelintr
 tests/07changelevels
 tests/07layouts
 tests/07reshape5intr
+tests/07revert-grow
+tests/07revert-inplace
+tests/07revert-shrink
 tests/07testreshape5
-tests/08imsm-overlap
 tests/09imsm-assemble
 tests/09imsm-create-fail-rebuild
+tests/09imsm-overlap
 tests/10ddf-create
+tests/10ddf-create-fail-rebuild
+tests/10ddf-fail-create-race
+tests/10ddf-fail-spare
+tests/10ddf-fail-twice
+tests/10ddf-fail-two-spares
+tests/10ddf-geometry
 tests/11spare-migration
 tests/12imsm-r0_2d-grow-r0_3d
 tests/12imsm-r0_2d-grow-r0_4d
@@ -190,11 +217,17 @@ tests/18imsm-1d-takeover-r1_2d
 tests/18imsm-r0_2d-takeover-r10_4d
 tests/18imsm-r10_4d-takeover-r0_2d
 tests/18imsm-r1_2d-takeover-r0_1d
+tests/19raid6auto-repair
+tests/19raid6repair
+tests/19repair-does-not-destroy
 tests/ToTest
 tests/check
+tests/env-ddf-template
 tests/env-imsm-template
 tests/imsm-grow-template
 tests/testdev
 tests/utils
-udev-md-raid.rules
+udev-md-raid-arrays.rules
+udev-md-raid-assembly.rules
 util.c
+xmalloc.c

makedist

@@ -15,7 +15,7 @@ else echo $target is not a directory
      exit 2
 fi
 set `grep '^#define VERSION' ReadMe.c `
-version=`echo $7 | sed -e 's/"//g'`
+version=`echo $3 | sed -e 's/"//g'`
 grep "^.TH MDADM 8 .. v$version" mdadm.8.in > /dev/null 2>&1 ||
  {
    echo mdadm.8.in does not mention version $version.
@@ -47,8 +47,8 @@ echo version = $version
 base=mdadm-$version.tar.gz
 if [ " $arg" != " diff" ]
 then
-  if [ -f $target/$base ] 
+  if [ -f $target/$base ]
-  then 
+  then
     echo $target/$base exists.
     exit 1
   fi
@@ -83,14 +83,14 @@ then
     fi
   fi
 else
-  if [ ! -f $target/$base ] 
+  if [ ! -f $target/$base ]
-  then 
+  then
     echo $target/$base does not exist.
     exit 1
   fi
   ( cd .. ; ln -s mdadm.v2 mdadm-$version ; tar chf - --exclude=.git --exclude="TAGS" --exclude='*,v' --exclude='*~' --exclude='*.o' --exclude mdadm --exclude=mdadm'.[^ch0-9]' --exclude=RCS mdadm-$version ; rm mdadm-$version ) | gzip --best > /var/tmp/mdadm-new.tgz
   mkdir /var/tmp/mdadm-old ; zcat $target/$base | ( cd /var/tmp/mdadm-old ; tar xf - )
   mkdir /var/tmp/mdadm-new ; zcat /var/tmp/mdadm-new.tgz | ( cd /var/tmp/mdadm-new ; tar xf - )
-  diff -ru /var/tmp/mdadm-old /var/tmp/mdadm-new 
+  diff -ru /var/tmp/mdadm-old /var/tmp/mdadm-new
   rm -rf /var/tmp/mdadm-old /var/tmp/mdadm-new /var/tmp/mdadm-new.tgz
 fi

mdadm.8.in

@@ -5,7 +5,7 @@
 .\"   the Free Software Foundation; either version 2 of the License, or
 .\"   (at your option) any later version.
 .\" See file COPYING in distribution for details.
-.TH MDADM 8 "" v3.2.5
+.TH MDADM 8 "" v3.3
 .SH NAME
 mdadm \- manage MD devices
 .I aka

mdadm.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

mdadm.spec

@@ -1,6 +1,6 @@
 Summary:     mdadm is used for controlling Linux md devices (aka RAID arrays)
 Name:        mdadm
-Version:     3.2.5
+Version:     3.3
 Release:     1
 Source:      http://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-%{version}.tar.gz
 URL:         http://neil.brown.name/blog/mdadm
@@ -9,7 +9,7 @@ Group:       Utilities/System
 BuildRoot:   %{_tmppath}/%{name}-root
 Obsoletes:   mdctl
 
-%description 
+%description
 mdadm is a program that can be used to create, manage, and monitor
 Linux MD (Software RAID) devices.
 
@@ -37,37 +37,9 @@ rm -rf $RPM_BUILD_ROOT
 %doc TODO ChangeLog mdadm.conf-example COPYING
 %{_sbindir}/mdadm
 %{_sbindir}/mdmon
-/lib/udev/rules.d/64-md-raid.rules
+/usr/lib/udev/rules.d/63-md-raid-arrays.rules
+/usr/lib/udev/rules.d/64-md-raid-assembly.rules
 %config(noreplace,missingok)/%{_sysconfdir}/mdadm.conf
 %{_mandir}/man*/md*
 
 %changelog
-* Fri May 10 2002  <neilb@cse.unsw.edu.au>
-- update to 1.0.0
-- Set CXFLAGS instead of CFLAGS
-
-* Sat Apr  6 2002  <neilb@cse.unsw.edu.au>
-- change install to use "make install"
-
-* Fri Mar 15 2002  <gleblanc@localhost.localdomain>
-- beautification
-- made mdadm.conf non-replaceable config
-- renamed Copyright to License in the header
-- added missing license file
-- used macros for file paths
-
-* Fri Mar 15 2002 Luca Berra <bluca@comedia.it>
-- Added Obsoletes: mdctl
-- missingok for configfile
-
-* Wed Mar 12 2002 NeilBrown <neilb@cse.unsw.edu.au>
-- Add md.4 and mdadm.conf.5 man pages
-
-* Fri Mar 08 2002		Chris Siebenmann <cks@cquest.utoronto.ca>
-- builds properly as non-root.
-
-* Fri Mar 08 2002 Derek Vadala <derek@cynicism.com>
-- updated for 0.7, fixed /usr/share/doc and added manpage
-
-* Tue Aug 07 2001 Danilo Godec <danci@agenda.si>
-- initial RPM build

mdassemble.8

@@ -1,5 +1,5 @@
 .\" -*- nroff -*-
-.TH MDASSEMBLE 8 "" v3.2.5
+.TH MDASSEMBLE 8 "" v3.3
 .SH NAME
 mdassemble \- assemble MD devices
 .I aka
@@ -9,7 +9,7 @@ Linux Software RAID
 
 .BI mdassemble
 
-.SH DESCRIPTION 
+.SH DESCRIPTION
 .B mdassemble
 is a tiny program that can be used to assemble MD devices inside an
 initial ramdisk (initrd) or initramfs; it is meant to replace the in-kernel

mdmon.8

@@ -1,5 +1,5 @@
 .\" See file COPYING in distribution for details.
-.TH MDMON 8 "" v3.2.5
+.TH MDMON 8 "" v3.3
 .SH NAME
 mdmon \- monitor MD external metadata arrays
 

mdopen.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify

util.c

@@ -1,7 +1,7 @@
 /*
  * mdadm - manage Linux "md" devices aka RAID arrays.
  *
- * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
+ * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify