Number of blocks used to calculate array size is based on 512 block size
so the size displayed is incorrect for arrays with 4k disks.
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
If it can't connect monitor, now the error message is just
Error waiting for xxx to be clean. Add detail error message
in connect_monitor.
Suggested-by: Oleg Samarin <osamarin68@gmail.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
OROM defines maximum number of arrays supported. On array creation mdadm
checks if number of arrays doesn't exceed that limit, however it is not
calculated correctly for VMD now.
The current code performs a lookup of HBA using the id. VMD HBAs have
the same id so each lookup returns the same structure (first
encountered). Take a different approach for VMD HBAs. As id is not
unique and cannot be used for lookups, iterate over all VMD HBAs and
compare both id and HBA path.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
When VMD is enabled but no drive is attached to the PCIe port, mdadm
crashes trying to parse the path. Skip entry if valid path has not been
returned. Do it early to avoid unnecessary memory allocation.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Prior to this patch there was an error during compiling
on 32-bit arch. This patch fixes this issue.
Reported-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Enable bad block support for imsm metadata as commit e522751d605d
("seq_file: reset iterator to first record for zero offset") has been
accepted in upstream kernel. Prior to that patch mdmon had not been able
to read bad blocks sysfs file.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch prevents mdadm from updating metadata if migration is
not possible. The same check is done in analyse_change(),
but in that place - metadata is already modified.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
get_component_size() still assumes that all array are
/sys/block/md%d or /sys/block/md_d%d
and so doesn't work with e.g. /sys/block/md_foo.
This cause "mdadm --detail" to report
Used Dev Size : unknown
and causes problems when added spares and in other circumstances.
So change it to use stat2devnm() which does the right thing with all
types of array names.
Reported-and-tested-by: Robert LeBlanc <robert@leblancnet.us>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This test cases checks data integrity of raid5 write back cache
under various scenarios:
degraded mode, non-overwrite, raid-5/6.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
For 4K disks 'endofpart' is an index of the last 4K sector used by partition.
mdadm is using number of 512-byte sectors, so value returned by
get_last_partition_end must be multiplied by 8 for devices with 4K sectors.
Also, unused 'ret' variable has been removed.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
mdadm is using invalid byte-offset while reading GPT header to get
partition info (size, first sector, last sector etc.). Now this offset
is hardcoded to 512 bytes and it is not valid for disks with sector
size different than 512 bytes because MBR and GPT headers are aligned
to LBA, so valid offset for 4k drives is 4096 bytes.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
IMSM doesn't set 'events' field with generation number, so sometimes mdadm
tries to re-assembly container using metadata which isn't most recent (e. g.
from spare disk).
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds checking if platform (preOS) supports
non-Intel NVMe drives under VMD domain,
and - if so - allow creating IMSM Raid Volume
with those drives.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
There is no need to request write access when opening
the md device, as we never write to it, and none of the
ioctls we use require write access.
If we do open with write access, then when we close, udev notices that
the device was closed after being open for write access, and it
generates a CHANGE event.
This is generally unwanted, and particularly problematic when mdadm is
trying to --stop the array, as the CHANGE event can cause the array to
be re-opened before it completely closed, which results in a new mddev
being allocated.
So just use O_RDONLY instead of O_RDWR.
Reported-by: Marc Smith <marc.smith@mcc.edu>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Implement "--examine-badblocks" command to provide list of bad blocks in
metadata for a disk.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Provide list of bad blocks using memory allocated in advance so it's
safe to call it from monitor.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If a disk fails or goes missing, clear the bad blocks associated with it
from metadata. If necessary, update disk ordinals.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Check for a duplicate first or try to merge it with existing bad block.
If block range exceeds BBM_LOG_MAX_LBA_ENTRY_VAL (256) blocks, it must
be split into multiple ranges. Fail if maximum number of bad blocks has
been already reached.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
On create set bad block support flag for each drive. On assmble also
provide a list of known bad blocks. Bad blocks are stored in metadata
per disk so they have to be checked against volume boundaries
beforehand.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Pre-allocate memory for largest possible bad block section when monitor
is being opened to avoid a need for memory allocation on metadata sync.
If memory for a structure has been allocated in mpb buffer but it hasn't
been used yet, it will be taken by next buffer grow, leading to
insufficient memory on metadata flush. Start tracking such memory and
take it into calculation when growing a buffer. Also assert has been
added to debug mode to warn when more metadata has been written than
memory allocated.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Always allocate memory for all log entries to avoid a need for memory
allocation when monitor requests to record a bad block.
Also some extra checks added to make static code analyzer happy.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
We currently use '1' to indicate that a flag (writemostly or failfast)
needs to be set, and '2' to indicate that it needs to be cleared.
Using magic number like this is not a best-practice.
So replaced them with values from a enum.
No functional change.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If an update of acknowledged bad blocks file is notified, read entire
bad block list from sysfs file and compare it against local list of bad
blocks. If any obsolete entries are found, remove them from metadata.
As mdmon cannot perform any memory allocation, new superswitch method
get_bad_blocks is expected to return a list of bad blocks in metadata
without allocating memory. It's up to metadata handler to allocate all
required memory in advance.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If md has changed the state to 'blocked' and metadata handler supports
bad blocks, try process them first. If metadata handler has successfully
stored bad block, acknowledge it to md via 'badblocks' sysfs file. If
metadata handler has failed to store the new bad block (ie. lack of
space), remove bad block support for a disk by writing "-external_bbl"
to state sysfs file. If all bad blocks have been acknowledged, request
to unblock the array.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Open 'badblocks' and 'unacknowledged_bad_blocks' sysfs files for each
disk in the array. Add them to the list of files observed by monitor.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If metadata handler provides support for bad blocks, tell md by writing
'external_bbl' to rdev state file (both on create and assemble),
followed by a list of known bad blocks written via sysfs 'bad_blocks'
file.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds updataing num_data_stripes during reshape.
Previously this field once set during creation was never updated.
Also, num_data_strips value multipied by chunk_size is used
for set proper component size for RAID5.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Allow per-device "failfast" flag to be set when creating an
array or adding devices to an array.
When re-adding a device which had the failfast flag, it can be removed
using --nofailfast.
failfast status is printed in --detail and --examine output.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Bad block support has incremented sysfs disk state reported by kernel
("external_bbl") so it became longer than 20 bytes. It causes reshape to
fail as it reads truncated entry from sysfs.
Increase buffer so it can accommodate the string including all state
values currently implemented in kernel at the same time.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
'unacknowledged_bad_blocks' is a long name for sysfs property and it
makes sysfs path over 50 characters long. Increase buffer to the double
length of the longest path available in sysfs at the moment.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Convert general migration record for 4Kn drives prior to write and post
read. Calculate record location based on sector size, don't just assume
it's 512. Assure buffer address is aligned to 4096 so write operation
avoids caching.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds support for drives with 4Kn sector size
for IMSM metadata. Mixing member drives with 4kn and 512
is not allowed. Some offsets were aligned with sector size.
Internal metadata representation and all calculations
are still based on 512-byte sector sizes. This
implementation converts only sector based values
when reading/writing to drive, because they needs to be
stored in metadata according to accual member drive sector size.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds retriving device sector size at startup
and set it in intel_super, so it can be used in other places.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch introduces the function for getting sector size of
given device (fd).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Commit f79bbf4f69 ("super1: don't put the bblog at the end of the free
space.") changed the location of the bad block log to be after the
write-intent bitmap, but a fixed offset was used and it can make bbl
overlap with the bitmap, especially when using a small bitmap chunk.
This patch changes it to use the actual offset and size of the bitmap.
It also joins the cases for v1.1 and v1.2 superblock because the code
was very similar.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Determining internal bitmap size is performed using two different
functions (bitmap_sectors() and calc_bitmap_size()) and in
getinfo_super1() it is calculated in yet another way. Each of these
methods give slightly different results. The most accurate is
calc_bitmap_size() but it also has a rounding issue. So:
- fix the rounding issue in calc_bitmap_size() using bitmap_bits()
- replace usages of bitmap_sectors() and open-coded calculations with
calc_bitmap_size()
- remove bitmap_sectors()
- move bitmap_bits() to mdadm.h as inline - otherwise mdassemble won't
compile (it does not use bitmap.c)
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
In scenario where VMD is enabled, and "x8" type of NVMe drive is
plugged into PCIe switch - the path will be longer than 200 chars
(additional VMD domain + 2 level of PCIe switches).
This patch makes the buffer big enough to handle this kind of
configurations.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds the warning message when x8-type device
is used with IMSM metadata. x8 device is a special
NVMe drive - two of them on a single PCIe card.
This card could be a single point of failure for
RAID levels different than RAID0. x8 devices have
serial number ending with "-A/-B" or "-1/-2".
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Migration record is only stored on disks in first and second metadata
slot. The function to load the record incorrectly passes disk slot as
disk index. If rebuilt has taken place for a container, disk slot
doesn't match disk index so it causes migration record to be read from a
disk it has not been written to. As a result reshape operation fails.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
To fix the following error info:
root@vm-lkp-nex04-8G-7 /tmp/mdadm# make test
cc -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter -ggdb -DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\" -DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\" -DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\" -DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM -DVERSION=\"3.4-43-g1dcee1c\" -DVERS_DATE="\"06th April 2016\"" -DUSE_PTHREADS -DBINDIR=\"/sbin\" -c -o raid6check.o raid6check.c
raid6check.c: In function 'manual_repair':
raid6check.c:267:4: error: this 'else' clause does not guard... [-Werror=misleading-indentation]
else
^~~~
raid6check.c:269:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'else'
printf("Repairing D(%d) and P\n", failed_data);
^~~~~~
cc1: all warnings being treated as errors
<builtin>: recipe for target 'raid6check.o' failed
make: *** [raid6check.o] Error 1
root@vm-lkp-nex04-8G-7 /tmp/mdadm#
Cc: NeilBrown <neilb@suse.com>
Cc: linux-raid <linux-raid@vger.kernel.org>
Cc: LKP <lkp@eclists.intel.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Yilong Ren <yilongx.ren@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Since the MBR layout only has partition records as 2-byte aligned, the
32-bit fields in them are not aligned. Thus, they cannot be accessed on
some architectures (such as SPARC) by using a "struct MBR_part_record *"
pointer, as the compiler can assume that the pointer is properly aligned.
Instead, the records must be accessed by going through the MBR struct
itself every time.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
IMSM doesn't allow to change RAID level of array in container with two
arrays but array count check is being done too late (after removing disks)
and in some cases (e. g. RAID 0 and RAID 1 migrated to RAID 0) both arrays
become degraded. This patch adds array count check before disks are being
removed.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Chunk size change of RAID 10 array fails because it is not supported but
invalid values still are being written to metadata and array cannot be
assembled after stop. Operation should be blocked before metadata update.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
For older mdadm version, v1.x metadata has different bitmap_offset,
we can't ensure all the bitmaps are on a 4K boundary since writing
4K for bitmap could corrupt the superblock, and Anthony reported
the bug about it at below link.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837964
So let's check about the alignment for bitmap_offset before set
the boundary to 4096 unconditionally. Thanks for Neil's detailed
explanation.
Reported-by: Anthony DeRobertis <anthony@derobert.net>
Fixes: 95a05b37e8 ("Create n bitmaps for clustered mode")
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The clang compiler complained about each of these.
The mdmon.h error will only affect 'far' RAID10 arrays using intel or DDF
metadata, and there is no such thing.
The mdopen.c will cause a problem if there are no free md device
numbers in the first 512. That is fairly unlikely.
The restripe.c error would only affect the 'test_stripe' command, and
probably doesn't change its behaviour.
The super-intel.c fix is purely cosmetic.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Jes Sorensen
Maksymilian Kunt
Xiao Ni
Alexey Obitotskiy
Pawel Baldysiak
Tomasz Majchrzak
NeilBrown
Song Liu
Mariusz Dabrowski
Artur Paszkiewicz
Yilong Ren
James Clarke
Jes Sorensen
Guoqing Jiang