We currently use '1' to indicate that a flag (writemostly or failfast)
needs to be set, and '2' to indicate that it needs to be cleared.
Using magic number like this is not a best-practice.
So replaced them with values from a enum.
No functional change.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Allow per-device "failfast" flag to be set when creating an
array or adding devices to an array.
When re-adding a device which had the failfast flag, it can be removed
using --nofailfast.
failfast status is printed in --detail and --examine output.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
mdadm: 'clustered' bitmap has already supported, thus add the
prompt if users specify wrong value for bitmap param.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
mdadm:add '--nodes' option in GROW mode, because
'Cluster nodes' is set 4 by default if the nodes
parameter is not specified when switch bitmap
from none to clustered.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Be more consistent in the formatting of conditionals. Don't split on
multiple lines if not needed, don't overflow the 80 character line
length, put the condition operator at the end of the line of
multi-line conditionals, etc.
This should be purely cosmetic.... famous last words!
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This forcibly removed the bad-block log. There can be situations where it is hard to
remove bad blocks by writing to them - partiularly on RAID5.
Signed-off-by: NeilBrown <neilb@suse.com>
This patch tries recreates missing/faulty journal in mdadm.
Example:
./mdadm --fail /dev/md1 /dev/sdb2
mdadm: set /dev/sdb2 faulty in /dev/md1
./mdadm --stop /dev/md1
mdadm: stopped /dev/md1
./mdadm -A --scan --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md/1 has been started with 15 drives.
./mdadm --add-journal /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Let libcmap lib and related funs also only need one-time
setup during mdadm running period.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Modifying an exiting device's superblock or creating a new superblock
on an existing device needs to be checked because the device could be
in use by another node in another array. So, we check this by taking
all superblock locks in userspace so that we don't step onto an active
device used by another node and safeguard against accidental edits.
After the edit is complete, we release all locks and the lockspace so
that it can be used by the kernel space.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Add BITMAP_MAJOR_CLUSTERED as 5, in order to prevent older kernels
to assemble a clustered device.
In order to maximize compatibility, the major version is set to
BITMAP_MAJOR_CLUSTERED *only* if the bitmap is clustered.
Also, added MD_FEATURE_CLUSTERED in order to return error
for older kernels which would assemble MD in case bitmap is
corrupted.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
These both have the same value, and have done since the
'devnm' concept was introduced.
So discard the pointless duplicate.
Signed-off-by: NeilBrown <neilb@suse.de>
This extends nodes option for assemble mode, make the num of
cluster node could be change by user.
Before that, it is necessary to ensure there are enough space
for those nodes, calc_bitmap_size is introduced to calculate
the bitmap size of each node.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
To support change the cluster name, the commit do the followings:
1. extend original write_bitmap function for new scenario.
2. add the scenarion to handle the modification of cluster's name
in write_bitmap1.
3. let the cluster name also show in examine_super1 and detail_super1
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
A clustered disk is added by the traditional --add sequence.
However, other nodes need to acknowledge that they can "see"
the device. This is done by --cluster-confirm:
--cluster-confirm SLOTNUM:/dev/whatever (if disk is found)
or
--cluster-confirm SLOTNUM:missing (if disk is not found)
The node initiating the --add, has the disk state tagged with
MD_DISK_CLUSTER_ADD and the one confirming tag the disk with
MD_DISK_CANDIDATE.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The home-cluster is stored in the bitmap super block of the
array. The device can be assembled on a cluster with the
cluster name same as the one recorded in the bitmap.
If home-cluster is not specified, this is auto-detected using
dlopen corosync cmap library.
neilb: allow code to compile when corosync-devel is not installed.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Specifies the maximum number of nodes in the cluster that may use
this device simultaneously. This is equivalent to the number of
bitmaps created in the internal superblock (patches to follow).
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is best to keep strings all together so that they
are easier to search for in the source code.
If a string is so long that it looks ugly one line,
them maybe it should be broken into multiple lines
for display too.
Only strings which contain a newline can be broken
into multiple lines:
"It is OK to\n"
"break this string\n"
Signed-off-by: NeilBrown <neilb@suse.de>
make dprintf() print program name and __func__, so that
this messaging is consistent.
Also remove all __func__ messages from pr_err(). We shouldn't
leak that internal data in error message.
If we really want function name there, we new pr_XXX might
be wanted.
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes mdadm prints messages with wrong name "mdmon",
and vice versa.
This patch solves this problem by changing method of determining
process name.
Now "Name" will be set in const at start of a program,
previously was hardcoded as #define.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--incremental currently fails if the device name passed does not
textually match the names permitted by the DEVICE line in mdadm.conf.
This is problematic when "mdadm -I" is run by udev as the name given
can be a temp name.
This patch makes two improvements:
1/ We generate a list of all existing devices that match the names
in mdadm.conf, and allow rdev based matching
2/ We allows extra aliases to be provided on the command line, and
perform textual matching on those. This is particularly suitable
for udev usages as ${DEVLINKS} can be provided even though the links
make not yet be created.
Signed-off-by: NeilBrown <neilb@suse.de>
--add-spare is like --add, but a --re-add is never attempted.
So it is equivalent to two separate commands:
--zero-metadata
--add
Signed-off-by: NeilBrown <neilb@suse.de>
We really need to make sure assemble_container_content()
gets called to finished the assembly of these.
Reported-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Current "mdadm --run /dev/mdX" will not handle external metadata
properly. mdmon won't be started etc.
So use the code from "mdadm -IRs" instead - that already does all
the right things.
Reported-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Telling systemd that mdadm was started from the initrd
is often a lie and never necessary. Now that the reshape monitoring
thread handles SIGTERM gracefully it is OK for system to kill
and mdadm that it finds running.
mdmon still have a bit of a question mark over it so I won't remove
the '@' from there just yet.
Signed-off-by: NeilBrown <neilb@suse.de>
This is useful for reshaping a RAID0 to a higher level.
The recovery will happen at the same time as the reshape.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the smooth conversion of legacy 0.90 arrays
to 1.0 metadata.
Old metadata is likely to remain but will be ignored.
It can be removed with
mdadm --zero-superblock --metadata=0.90 /dev/whatever
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
misc_scan assumes that any device name found in the 'mapping' file
is usable. Usually it is but sometimes not, such as for inactive
devices.
Depending on it isn't really robust, when a name is found, check that
it exists. If not, fall back on map_dev.
This will allow "--detail --scan" to notice inactive devices.
Signed-off-by: NeilBrown <neilb@suse.de>
Here, "large" means components are 100G or more. It is
usually beneficial to have write-intent bitmaps on such arrays.
They can be suppressed with --bitmap=none
Signed-off-by: NeilBrown <neilb@suse.de>
We widely use a "devnum" which is 0 or +ve for md%d devices
and -ve for md_d%d devices.
But I want to be able to use md_%s device names.
So get rid of devnum (a number) and use devnm (a 32char string).
eg.
md0
md_d2
md_home
Signed-off-by: NeilBrown <neilb@suse.de>
We still allow --offroot to be given - for compatibility with scripts
- but ignore it.
The whole point of --offroot is to get systemd to not auto-kill mdmon,
and we always want that.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Zhilong Liu
Jes Sorensen
Song Liu
Guoqing Jiang
Goldwyn Rodrigues
Lidong Zhong
NeilBrown
Pawel Baldysiak