This allows the smooth conversion of legacy 0.90 arrays
to 1.0 metadata.
Old metadata is likely to remain but will be ignored.
It can be removed with
mdadm --zero-superblock --metadata=0.90 /dev/whatever
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
With the 'devnm' infrastructure fixed, it is quite easy to support
names like "md_home" for md arrays.
The currently defaults to "off" and can be enabled in mdadm.conf with
CREATE names=yes
This is incase other tools get confused by the new names.
Signed-off-by: NeilBrown <neilb@suse.de>
A RAID10 array can have 'sets' of devices which are reported by
--detail.
They can now be collectively failed or removed.
Signed-off-by: NeilBrown <neilb@suse.de>
Here, "large" means components are 100G or more. It is
usually beneficial to have write-intent bitmaps on such arrays.
They can be suppressed with --bitmap=none
Signed-off-by: NeilBrown <neilb@suse.de>
We still allow --offroot to be given - for compatibility with scripts
- but ignore it.
The whole point of --offroot is to get systemd to not auto-kill mdmon,
and we always want that.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm /dev/mdXX --re-add faulty
will identify any faulty devices in the array, remove them, and
--re-add them.
Signed-off-by: NeilBrown <neilb@suse.de>
--replace can be used to replace a device without completely failing
it. Once the replacement completes the device will be failed.
--with can indicate which of several spares to use.
Signed-off-by: NeilBrown <neilb@suse.de>
And here's another trivial bugfix, now for spelling mistakes in various
places, authred by Sergey Kirpichev (Cc'ed) and carried in debian mdadm
package.
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm --create /dev/md0 .... /dev/sda1:1024 /dev/sdb1:2048 ...
The size is in K unless a suffix: K M G is given.
The suffix 's' means sectors.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
--update=bbl will add a bad block list to each device.
--update=no-bblk will remove the bad block list providing that it
is empty.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that /run seems to be a good standard, make that
the default for storing various run-time files, rather than
/var/run or /dev/.mdadm.
Signed-off-by: NeilBrown <neilb@suse.de>
Both --detail and --monitor can report the names of member
devices on an array, and do so by searching /dev and finding
the shortest name that matches.
If
--prefer=foo
is given, they will instead prefer a name that contain /foo/.
So
mdadm --detail /dev/md0 --prefer=by-path
will list the component devices via their /dev/disk/by-path/xxx
names.
Signed-off-by: NeilBrown <neilb@suse.de>
manpage for mdadm(8) contains typo - missing "d" at the end of "describe" word.
Signed-off-by: Roman Ovchinnikov <coolthecold@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When --offroot is specified, mdadm will change the first character of
argv[0] to '@'. This is used to signal to systemd that mdadm was
launched from initramfs and should not be shut down before returning
to the initramfs.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds to mdadm man the following information:
--continue
This option is complementary pair to assembly --freeze-reshape option.
It is needed when --grow operation is interrupted and it is not restarted
automatically due to --freeze-reshape usage during array assembly.
Option --continue has to be used together with -G , ( --grow ) command
and device that it should be executed on. All parameters required for
reshape continuation will be read from array metadata. If initial
--grow command had required --backup-file= option to be set,
continuation option will require to have exactly the same backup
file pointed to also.
Any other parameter passed together with --continue option will be ignored.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds to mdadm man the following information:
--freeze-reshape
Option is intended to be used in start-up scripts during initrd boot
phase. When array under reshape is assembled during initrd phase,
this option stops reshape after reshape critical section is being
restored. This happens before file system pivot operation and avoids lost
of file system context. Loosing file system context would cause
reshape to be broken.
Reshape can be continued later using -continue option for grow command.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This set the metadata to 1.2, not 1.0.
When the default was changed to 1.2 I forgot to update this part of
the man page.
Bug-Debian: http://bugs.debian.org/607375
Signed-off-by: NeilBrown <neilb@suse.de>
- explain it's use in guarding against small replacements
- clarify relationship with containers.
- include information about --grow --size not being supported by IMSM metadata.
Reported-by: maciej.naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fix random typos and add a few of missing words/macros.
Also update RAID website URL as it is not accessible anymore.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is supposed to be under Grow mode. Since Create/Build/Grow modes
use common options and '-a' is already used for '--auto' in Create/
Build modes, describe it to avoid confusion.
Signed-off-by: NeilBrown <neilb@suse.de>
When an array is resized to have larger members, --assume-clean will
disable any resync if the kernel supports it (2.6.40 and later).
Signed-off-by: NeilBrown <neilb@suse.de>
RAID0 has accepted chunksizes that are not a power of 2 since 2.6.30.
So it time mdadm allowed that to be used.
Signed-off-by: NeilBrown <neilb@suse.de>
This was #if-ed out for 3.0, but it really should go.
Gcc 4.6.0 complains that auto_update_home is set but not used
(which is true).
Reported-by: Tobias Powalowski <t.powa@gmx.de>
Add note to man that auto-assembly cannot be used for reshaped arrays.
Revisions: NeilBrown
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Update man for MDADM_EXPERIMENTAL flag.
Minor revisions by Mathias Burén <mathias.buren@gmail.com> and Neil Brown.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Suggesting by Rory Jaffe <rsjaffe@gmail.com> to make the danger
of shrinking, and to recommended avoidance technique, more explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
Before resizing an array with --size or --array-size, then filesystem
should be resized. mdadm cannot do this so the user should.
Reported-by: Gavin Flower <gavinflower@yahoo.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We somehow got to version of documentation for --array-size.
So merge them it one.
Reported-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: NeilBrown <neilb@suse.de>