Suggest to replace by the option name that 'make' use.
no error is only a developper hope.
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: NeilBrown <neilb@suse.de>
And here's another trivial bugfix, now for spelling mistakes in various
places, authred by Sergey Kirpichev (Cc'ed) and carried in debian mdadm
package.
Signed-off-by: NeilBrown <neilb@suse.de>
When --uuid is specified in the command line, even for v0.90
superblock we override last portion of uuid with data from
--homehost, which is wrong (and disagrees with the manpage).
Only use homehost in super0 if no uuid is specified.
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NeilBrown <neilb@suse.de>
Once we have found the devices we want, we need to load the
metadata from them and store it. This new function extracts that
functionality out of Assemble()
Signed-off-by: NeilBrown <neilb@suse.de>
Assemble() is way too big.
This patch starts cleaning it up by pulling the 'select_devices()'
function. This examines the device to make sure they all belong to
one array, or select those that do (depending on exact use case).
Signed-off-by: NeilBrown <neilb@suse.de>
open_container should open a container which contains the device,
but sometimes it would open another volume which contains the
device. Be more careful in 'holder' selection.
Signed-off-by: NeilBrown <neilb@suse.de>
If --incremental has partly assembled an array and
--assemble is asked to assemble it, the just finds remaining
devices and makes a new array. Not good.
So:
1/ modify locking policy so that assemble can be sure that
no --incremental is running once it locks the map file
2/ Assemble() checks the map file for a duplicate and adds to
that array instead of creating a new one.
Signed-off-by: NeilBrown <neilb@suse.de>
As it was the code would crash due to "mdstat" being NULL.
Code is now more sane, but hasn't been tested on an array that
needs to grow.
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm --create /dev/md0 .... /dev/sda1:1024 /dev/sdb1:2048 ...
The size is in K unless a suffix: K M G is given.
The suffix 's' means sectors.
Signed-off-by: NeilBrown <neilb@suse.de>
When reducing the number of devices in a RAID10, we increase the
data offset to avoid the need for backup area.
If there is no room at the end of the device to allow this, we need
to first reduce the component size of each device. However if there
is room, we don't want to insist on that, otherwise growing then
shrinking the array would not be idempotent.
So find the min before/after space before analysing a RAID10 for
reshape, and if the after space is insufficient, reduce the total size
of the array and the component size accordingly.
Signed-off-by: NeilBrown <neilb@suse.de>
sometimes 0.1% isn't enough, though mostly only in testing.
We need one chunk for a successful reshape, so reserve 2.
Signed-off-by: NeilBrown <neilb@suse.de>
Some arrays (raid10) never need a backup file, so during assembly
we can avoid the whole Grow_continue check in that case.
Achieve this using a flag set by the metadata handler.
Also get "mdadm -I" to fail if a backup process would be
needed. It currently does fail as the kernel rejects things,
but it is nicer to have this explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID10 reshape requires that data_offset be changed.
So we only allow it if the new_data_offset attribute is available,
and we compute a suitable change in data offset.
Signed-off-by: NeilBrown <neilb@suse.de>
The 'new_offset' is used for reshaping to avoid the need
for a backup file.
For now we only report the value when it is set.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
This is currently only useful for 1.x metadata and will allow an
explicit --data-offset request on command line.
Signed-off-by: NeilBrown <neilb@suse.de>
We will shortly introduce --data-offset= which is allowed to
be zero. We will want to use parse_size() so it needs to be
able to return '0' without it being an error.
So define INVALID_SECTORS to be an impossible value (currently '1')
and return and test for it consistently.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ When printing the "name=" entry for --brief output,
enclose name in quotes if it contains spaces etc.
Quotes are already supported for reading mdadm.conf
2/ When a name is used as a device name, translate spaces
and tabs to '_', as well as the current translation of
'/' to '-'.
Signed-off-by: NeilBrown <neilb@suse.de>
--update=bbl will add a bad block list to each device.
--update=no-bblk will remove the bad block list providing that it
is empty.
Signed-off-by: NeilBrown <neilb@suse.de>
If multiple reshapes are activated on the same devices (different
partitions) then one might be forced to wait for the other to
complete.
As reshaping suspends access to small sections of the array
at time, this cause a region to be suspended for a long time,
which isn't good.
To try to detect this and don't start suspending until
the reshape is actually happening.
This is only effective on 3.7 and later as prior kernels
don't report when the delayed reshape can progress. For
the earlier kernels, just give a warning.
Signed-off-by; NeilBrown <neilb@suse.de>
The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.
So change it to make this number explicit.
Reported-by: Jakub Husák <jakub@gooseman.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
sha1.h claims GPL3+, while sha1.c claims GPL2+. This is
inconsistent and technically prevents the whole from being
distributed under GPL2.
So replace sha1.h with a version from the GCC sources from before
Tue Apr 20 08:36:39 2010
when the copyright notice was updated.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
An additional pair of key=value for --examine --export.
Signed-off-by: Maciej Naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When using human_size_brief, only IEC prefixes were supported. Now
it's possible to specify which format we want to see - either IEC
(kibi, mibi, gibi) or JEDEC (kilo, mega, giga).
Signed-off-by: Maciej Naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It would be better if two size-calculating methods had the same
calculating algorithm. The human_size way of calculation seems
more readable, so let's use it for both methods.
Signed-off-by: Maciej Naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Variable 'err' is initially set to 1, so changing its value with
'|=' won't set it to 0 even if the operation is successful.
Signed-off-by: Maciej Naruszewicz <maciej.naruszewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We must only remove from a container if the device isn't a
member of any member array.
To check we look at the 'holders' directory in sysfs.
We currently skip that check if ->devname is "detached", however
that can never be true since the change that introduced
add_detached().
Also sysfs_unique_holder returns status in 'errno' which isn't
entirely safe as e.g. closedir() is probably allowed to clear it.
So make sysfs_unique_holder return an unambigious value, and us
it to decide what to report.
Signed-off-by: NeilBrown <neilb@suse.de>
Inappriopriate error messages (e.g. mdadm: platform does not support
raid5 with 0 disk) have been displayed when too small size was given.
This patch fixes it.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
An error in parse_size() should be reported by 0, not -1,
because -1 is changed to the max value of unsigned long long
during calculations of size (e.g. at mdadm.c:412).
A negative value of size should be reported as error
(e.g. size equal -1 has been changed to the max value of
unsigned long long so far).
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Size expansion to the 'max' value has been broken since
the following patch:
commit d04f65f48c
Change the values for "max size" from -1 to 1.
This patch re-enables it.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Gilles Espinasse
Michael Tokarev
NeilBrown
Maciej Naruszewicz
Jes Sorensen
Lukasz Dorau