This allows the layout to be parsed after the current level of the
array is know, so that the level doesn't need to be given (otherwise
pointlessly) on the command line.
Signed-off-by: NeilBrown <neilb@suse.de>
Bother Manage_reconfig and Grow_reshape provide for changing
the 'layout' of a faulty array. This is no necessary.
So discard Manage_reconfig and just use Grow_reshape
Signed-off-by: NeilBrown <neilb@suse.de>
With 2.6.30 it is possible to tell the md driver to clip an array to a
size smaller than the real size of the array. This option gives
access to that feature. The size change does not persist
across restarts.
Signed-off-by: NeilBrown <neilb@suse.de>
When rebuilding the mapfile (mdadm -Ir), if not appropriate name is
found in /dev/md/, try to find an appropriate name, either by looking
in mdadm.conf or by using the name in the metadata.
Signed-off-by: NeilBrown <neilb@suse.de>
If mdadm.conf contains
HOMEHOST <ignore>
or commandline contains
--homehost=<ignore>
then the check that array metadata mentions the given homehost is
replace by a check that the name recorded in the metadata is not
already used by some other array mentioned in mdadm.conf.
This allows more arrays to use their native name rather than having
an _NN suffix added.
This should only be used during boot time if all arrays required for
normal boot are listed in mdadm.conf.
If auto-assembly is used to find all array during boot, then the
HOMEHOST feature should be used to ensure there is no room for
confusion in choosing array names, and so it should not be set
to <ignore>.
Signed-off-by: NeilBrown <neilb@suse.de>
Because ---examine --brief, or --detail --brief are
often used to create mdadm.conf, and because people don't want to
have to update their mdadm.conf unnecessarily, we don't want to
include information that might change.
And now that level changing is supported, that is almost everything
but UUID.
So move some more fields into the "Only print with --verbose" class.
Signed-off-by: NeilBrown <neilb@suse.de>
The line 'auto' in mdadm.conf can be used to disable assembly
of specific metadata types, or of all arrays.
This does not affect assembly of arrays listed in mdadm.conf
or on command line.
auto -all
will disable all auto-assembly.
auto -ddf
will cause mdadm to ignore ddf arrays that are not explicitly
mentioned, and auto assemble anything else it finds.
Signed-off-by: NeilBrown <neilb@suse.de>
This patch enables the --size parameter for build operations.
Without this, if you have a raid1, for instance, where the 2 disks are
not the exact same size, and you need to build the array but one of the
disks is not available right at the moment (maybe it's USB and it's
unplugged, or maybe it's a network disk and it's unavailable), then you
have to play some weird games to get the array to size correctly (that
is, to the size of the smaller of the two components or less).
There may be other uses for this too...
--
Paul
Signed-off-by: NeilBrown <neilb@suse.de>
When building container members with -IR, we need to ensure that
devices added to an active array preserve the 'in_sync' status so they
don't needlessly get rebuilt.
So allow sysfs_add_disk to do this (only works in kernels since
2.6.30) and pass the relevant flag down.
Signed-off-by: NeilBrown <neilb@suse.de>
For short reshapes the kernel may be done before mdadm can check that
progress has passed the critical section.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm arrays round down the effective array size to the closest 1
megabyte boundary so teach get_info_super_imsm and sysfs_set_array to
set 'md/array_size' if available (and make sure ddf uses the default
size).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
wait not only for the name to appear, but for it to refer to the
correct device.
Sometimes old symlinks left lying around can be confusing.
Signed-off-by: NeilBrown <neilb@suse.de>
If an array reshape completed within 1 second, then --grow will not
notice that it has finished and will keep waiting for the critical
section to pass.
So be more cautious in the test.
Signed-off-by: NeilBrown <neilb@suse.de>
DDF raid6 layouts are subtly different from the standard 'md' layouts.
From 2.6.30 the kernel knows about these.
Teach mdadm about them, and also allow 'ddf' to set an appropriate default.
Signed-off-by: NeilBrown <neilb@suse.de>
All operations that rely on loading from an existing container (like
--add) will fail after a disk has been removed. Provide an option to
skip missing / offline disks rather than abort. We attempt to do this
in the load_super_{imsm,ddf}_all cases when mdmon is running i.e. we
already have a consitent version of the metadata running in the system.
Otherwise, we fail as normal and let the administrator fix up the
container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-08 Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
* Makefile (dadm.uclibc): Remove misspelled and unneeded rule.
* md5.h: Include stdint.h for uClibc.
* mdadm.h: uClibc defines __UCLIBC__. If uClibc has LFS off
then use lseek instead of lseek64.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
If the metadata handler can not find its platform support components
then there is no way for it to verify that the raid configuration will
be supported by the option-rom. Provide a generic method for metadata
handlers to warn the user that the array they are about to create may
not work as intended with a given platform.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let handlers specifiy their own defaults, specifically needed for the
imsm-raid5 case where mdadm defaults to 'ls' and imsm to 'la'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If, when creating an array, a signal target device is given which
is a container, then allow the metadata handler to choose which
devices to use.
This is currently only supported for DDF.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that names in /dev are usually created (eventually) by udev,
it isn't really safe to rely in finding a name in /dev to pass to
mdmon to identify which array to monitor.
And it isn't really necessary to have a name in /dev.
So just pass the symbolic name, e.g. md127 or md123.
Change util.c to pass that name, and change mdmon to process the
name sensibly.
Signed-off-by: NeilBrown <neilb@suse.de>
It is possible for the mapfile to become wrong, and that gets
very confusing. So validate entries before returning them.
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than appending the md minor number, we now append a small
sequence number to make sure name in /dev/md/ that aren't LOCAL are
unique. As the map file is locked while we do this, we are sure
of no losing any races.
Signed-off-by: NeilBrown <neilb@suse.de>
Try to treat members of containers much like other arrays for
assembly.
We still look through the list of devices for a match (it will be
the container), then find the relevant 'info' and try to assemble
the array.
Signed-off-by: NeilBrown <neilb@suse.de>
Factor out, from Incremental_container, the code for assembling an
array based on information extracted from a container. We will
shortly use this from Assemble too.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This only applies if udev isn't installed or is disabled
by MDADM_NO_UDEV
We try to remove partitions too.
We find names to remove by looking in /var/run/mdadm/map
Signed-off-by: NeilBrown <neilb@suse.de>
When a 'container' gets started, we need udev to notice, but the
kernel has no way of knowing that a KOBJ_CHANGE event is needed. So
send one directly via the 'uevent' sysfs attribute.
Also, uevents don't get generated when md arrays are stopped (prior to
2.6.28) so send 'change' events then too.
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm.conf is automatically generated, we might not know a
suitable /dev/name. But we do know the uuid of the container.
So allow that as an option.
Signed-off-by: NeilBrown <neilb@suse.de>
Change the "env_check_mdmon" function to be more generic, accepting
and environment variable name, as soon we will have a new use for it.
Signed-off-by: NeilBrown <neilb@suse.de>
We will shortly be feeding more information into the process of
creating array devices, so delay the creation. Still open them
early if the device already exists.
This involves making sure the autof flag is in the right place
so that it can be found at creation time.
Also, Assemble, Build, and Create now always close 'mdfd'.
Signed-off-by: NeilBrown <neilb@suse.de>
This reflect that fact that more often than not it is creating things
in /dev, and allows for a new open_mddev which does just that.
Signed-off-by: NeilBrown <neilb@suse.de>
Given an mdadm.conf like the following allow /dev/imsm and /dev/md/r1 to be
created by "mdadm -As".
DEVICES partitions
ARRAY /dev/imsm metadata=imsm auto=md UUID=b98f5dbe-aa859e7b-0e369b89-a80986d4
ARRAY /dev/md/r1 container=/dev/imsm member=0 auto=mdp UUID=3538e39c-b397c2e9-1aa031f9-2bc0eca4
spares=1
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
NeilBrown
Paul Clements
Dan Williams
Dustin Kirkland
Bernhard Reutner-Fischer