--no-sharing option disables moving spares between arrays/containers.
Without the option spares are moved if needed according to config rules.
We only allow one process moving spares started with --scan option.
If there is such process running and another instance of Monitor
is starting without --scan, then we issue a warning but allow it
to continue.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
<path-id> allows to identify the port to which given device is plugged
in. In case of hot-removal, udev can pass this information for future
use (eg. write this name as 'cookie' allowing to detect the fact of
reinserting device to the same port).
--path <path-id> parameter has been added to device removal handle
(and char *path has been added to IncrementalRemove() to pass this
value) in order to pass path-id to this handler.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used for hot-unplug. When a device has been remove,
udev can call
mdadm --incremental --fail sda
and mdadm will find the array holding sda and remove sda from
the array.
Based on code from Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
In some places it is referred to as "--rebuild", and while
that works due to getopt allowing prefixes, it could appear
confusing (rebuild means other things too) and being explicit
is some safeguard if we want to add e.g. --rebuild-foo later.
Reported-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow the name of the array stored in the metadata to be updated. In
some cases the metadata format may not be able to support this rename
without modifying the UUID. In these cases the request will be blocked.
Otherwise we allow the rename to take place, even for active arrays.
This assumes that the user understands the difference between the kernel
node name, the device node symlink name, and the metadata specific name.
Anticipating further need to modify subarrays in-place, introduce the
->update_subarray() superswitch method. A future potential use
case is setting storage pool (spare-group) identifiers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Support for deleting a subarray out of a container. When all subarrays
are deleted the component devices are converted back into spares, a
--zero-superblock is still needed to kill the remaining metadata at this
point. This operation is blocked when the subarray is active and may
also be blocked by the metadata handler when deleting the subarray might
change the uuid of other active subarrays. For example, with imsm,
deleting subarray 'n' may change the uuid of subarrays with indexes > n.
Deleting a subarray needs to be a container wide event to ensure
disks that record the modified subarray list perceive other disks that
did not receive this change as out of date.
Notes:
The st->subarray parsing in super-intel.c and super-ddf.c is updated to
be more strict now that we are reading user supplied subarray values.
Offline container modification shares actions that mdmon typically
handles so promote is_container_member() and version_to_superswitch()
(formerly find_metadata_methods()) to generic utility functions for the
cases where mdadm performs the operation.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ie. the percent increments after which RebuildNN event is generated
This is particulary useful when using --program option, rather than
(only) syslog for alerts.
Signed-off-by: Zdenek Behan <rain@matfyz.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
With 2.6.30 it is possible to tell the md driver to clip an array to a
size smaller than the real size of the array. This option gives
access to that feature. The size change does not persist
across restarts.
Signed-off-by: NeilBrown <neilb@suse.de>
DDF raid6 layouts are subtly different from the standard 'md' layouts.
From 2.6.30 the kernel knows about these.
Teach mdadm about them, and also allow 'ddf' to set an appropriate default.
Signed-off-by: NeilBrown <neilb@suse.de>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For use in distro shutdown scripts with a RAID root file system.
Returns immediately if the array is 'readonly', or not an externally
managed array. It is up to the distro's scripts to make sure no new
writes hit the device after this returns 'true'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
From: Doug Ledford <dledford@redhat.com>
This one fixes a bug where once manage mode is set, the -a short option
is no longer parsed correctly (true of grow mode as well). This happens
because when you switch the short opts to the bitmap_auto version, it
specifies that the argument must follow a, yet the loop expects to get
an undecorated option and parse it as the disk dev instead of trying to
parse optarg. So, create a new short opt array that is used for manage
and grow that doesn't list a as having an argument.
udev likes to get information about a device as key=value pairs so it
can create disk/by-id links etc. So add --export flag which causes
the output of --detail to easily parsable.
From: Kay Sievers <kay.sievers@novell.com>
This can be used to bootstrape homehost tagging.
If no arrays are found that are tagged, we look for any array
and tag it.
Signed-off-by: Neil Brown <neilb@suse.de>
Use to avoid starting arrays if there are
fewer devices available than last time the array was started.
This is only needed with --scan, as with --scan, that behaviour
is the default.
Signed-off-by: Neil Brown <neilb@suse.de>
To support resizing an array without a spare, mdadm now understands
--backup-file=
which should point to a file for storing a backup of critical data.
This can be given to --grow which will create the file, or
--assemble which will restore from the file if needed.
Signed-off-by: Neil Brown <neilb@suse.de>
From: ross@jose.lug.udel.edu (Ross Vandegrift)
Hi Neil,
While adding the text message mode, I saw a FIXME asking for syslog
support in monitor mode.
This patch adds exactly that.
Signed-off-by: Neil Brown <neilb@suse.de>
Support "--build"ing arrays with bitmaps.
hot-removal of bitmaps
--re-add of drives recently removed.
assorted extra tests
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Currently this includes
--write-behind to set level of write-behind supported
--write-mostly to flag devices as write-mostly.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
This includes:
adding --metadata= option to choose metadata format
adding metadata= word to config file.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Anna Czarnowska
Przemyslaw Czarnowski
NeilBrown
Dan Williams
Luca Berra
Zdenek Behan
Doug Ledford
Kay Sievers