Opening and hiding multiple modals at the same time as well as opening a
modal before fully hiding the previous one can lead to the body padding
infinitely increasing by the scrollbar width each time, with the only
way to fix it being refreshing the GUI.
Therefore, always try to ensure to open and hide multiple modals one by
one, and also that the previous modal has fully been hidden before
proceeding to open the next one. The most common case when this problem
happens is when saving config changes which displays a GUI blocking
modal that overlaps, e.g. with folder or device modals that have not
been hidden yet.
Ref: https://github.com/twbs/bootstrap/issues/3902#issuecomment-1547187799
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Because $scope is missing, there are JavaScript errors when ticking and
unticking the "Untrusted" checkbox in the Advanced tab of the Edit
Device modal.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the UI is always blocked from modifications when changes are
being saved, even if the save process takes very little time. This leads
to a situation where showing and closing the blocking modal can take
more time than is actually required to perform the whole operation. The
modal opening and closing very quickly can also cause the screen to
flash for a brief moment, leading to visual discomfort.
Because of this, wait for at least 200 ms and only show the blocking
modal if the changes have not been saved until then yet. The value of
200 ms is loosely based on [1] which states that 'a delay of 0.2–1.0
seconds does mean that users notice the delay and thus feel the computer
is "working" on the command, as opposed to having the command be a
direct effect of the users' actions.' Additionally, the delay must not
be too long, because the main purpose of the blocking modal is to
prevent the user from making further changes, and a longer delay would
possibly allow to do so in that brief amount of time as long as the user
is quick enough with their input.
[1] https://nngroup.com/articles/response-times-3-important-limits
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the versions filter is case-sensitive regardless of the
underlying OS. With this change, the filter becomes case-insensitive
everywhere, which is more user-friendly and makes it easier to search
for files whose exact case the user may not remember.
In addition, forward and backslashes are no longer distinguished,
whether used as path separators or as part of a file / directory
name (which is unlikely but possible on some platforms).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds an environment variable STVERSIONEXTRA that, when set, gets
added to the version information in the API and GUI.
The purpose of all this is to be able to communicate something about the
bundling or packaging, through the log & GUI and the end user, to the
potential person supporting it -- i.e., us. :) A wrapper can set this
variable to indicate that Syncthing is being run via `SyncTrayzor`,
`Syncthing-macOS`, etc., and thus indicate to the end user that the GUI
they are looking at is perhaps not the only source of truth and
management for this instance.
This removes the tilde expansion we had in the GUI. I'm not sure why we
had it, but there are valid reasons to have a folder path with tilde in
it in the config, and it was previously impossible to enter one of
those.
This prevents combining untrusted with introducer and auto-accept, and
also verifies that folders shared with untrusted devices have passwords
at config loading time.
Co-authored-by: Simon Frei <freisim93@gmail.com>
This makes the various protocol priorities configurable among the other
options. With this, it's possible to prefer QUIC over TCP for WAN
connections, for example. Both sides need to be similarly configured for
this to work properly.
The default priority order remains the same as previously (TCP, QUIC,
Relay, with LAN better than WAN).
To make this happen I made each dialer & listener more priority aware,
and moved the check for whether a connection is LAN or not into the
dialer / listener -- this is the new "lanChecker" type that's passed
around.
Currently, the name and date filters in the Restore Versions modal are
always enabled, even if there are no versioned files present. With this
change, they are enabled only when there are no errors and versioned
files actually exist.
In addition to disabling the filters, also completely skip date picker
generation, as it serves no function while still displaying a non-sense
date range, which starts today and ends in the past.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The current code assumes that lastSeenDays is always set which is not
the case when device reports its lastSeen as equal to the Unix epoch.
Thus, make sure that lastSeenDays is set before proceeding with the
disconnected-inactive status check to avoid JS errors in the browser.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds a word to the version string when running containerized. The
purpose is mostly to facilitate troubleshooting via screenshot by
"leaking" this rather important aspect of the setup. Additionally, the
version row gets "no-overflow-ellipsis" treatment so that the whole
thing is actually visible in the GUI and the (now useless) tooltip is
removed. In production releases this won't make a difference as the
whole thing will typically fit, but in odd setups it provides more info
up front.
* lib/connections: Cache isLAN decision for later external access.
The check whether a remote device's address is on a local network
currently happens when handling the Hello message, to configure the
limiters. Save the result to the ConnectionInfo and pass it out as
part of the model's ConnectionInfo struct in ConnectionStats().
* gui: Use provided connection attribute to distinguish LAN / WAN.
Replace the dumb IP address check which didn't catch common cases and
actually could contradict what the backend decided. That could have
been confusing if the GUI says WAN, but the limiter is not actually
applied because the backend thinks it's a LAN.
Add strings for QUIC and relay connections to also differentiate
between LAN and WAN.
* gui: Redefine reception level icons for all connection types.
Move the mapping to the JS code, as it is much easier to handle
multiple switch cases by fall-through there.
QUIC is regarded no less than TCP anymore. LAN and WAN make the
difference between levels 4 / 3 and 2 / 1:
{TCP,QUIC} LAN --> {TCP,QUIC} WAN --> Relay LAN --> Relay WAN -->
Disconnected.
gui: Add copy to clipboard, share by email, and share by SMS buttons to device IDs (fixes#2771, ref #3868)
Add buttons to allow for simpler sharing device IDs with others. The
first one copies the ID to clipboard (trying to use three different
methods, depending on the browser). The second one triggers a mailto
link with prefilled subject and body. The third one triggers an sms link
with prefilled body. The short description of Syncthing included in the
latter part of the body is a direct copy from the description at the
official website https://syncthing.net.
Issue #3868 is referred here, because the copy to clipboard button
offers an alternative method for IE11 users to actually be able to copy
device IDs without having to select it manually (which doesn't work).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, a disconnected device is marked as "Disconnected" without any
consideration whether the state is just temporary or rather it has been
like that for a long time, potentially requiring user intervention.
This commit adds a new state called "Disconnected (Inactive)" which is
shown for devices that have been disconnected for longer than a week. It
also changes the "Last seen" information, so that "Never" is used only
when the device hasn't connected at all, and the exact date is displayed
otherwise.
Additionally, when the date is older than 1 week, a note about that is
displayed below the date. Furthermore, when the date becomes older than
1 month, the note text colour changes to orange, and when it exceeds 1
year, the colour changes again to red. This is done to provide the user
with a visual clue that something may potentially be wrong and requires
a manual fix.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: André Colomb <src@andre.colomb.de>
There are some situations where an upgrade wouldn't be supported, even though the noUpgrade bool isn't set. So when handling the errors that are caused by this, when attempting an upgrade, it shouldn't lead to some sort of offline-message/restart/warning/etc...
I added some checks on specific errors related to this and return a 501 (Not Implemented) response instead, in case of an "UpgradeUnsupported"-error. Additionally, on the GUI-side, the 501-response is now not to be considered an error to act upon.
Currently, the link to remote GUI uses device addresses as they are
advertised from the router. Because of this, they may end up having a
scope ID attached to them. The problem is that browsers do not support
such addresses, leaving the user with a non-working URL.
Because of the above, use regex to simply filter out the scope ID from
the address before using it for Remote GUI.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* lib/locations: Fix enum values camelCase.
* lib/locations: Remove unused FailuresFile.
* cmd/syncthing: Turn around role of locations storage.
Previously the locations package was used to provide default paths,
possibly with an overridden home directory. Extra paths supplied on
the command line were handled and passed around in the options object.
To make the changed paths available to any other interested package,
override the location setting from the option if supplied, instead of
vice versa when not supplied. Adapt code using this to read from the
locations package instead of passing through the options object.
* lib/locations: Refactor showPaths to locations package.
Generate a reusable string in locations.PrettyPrintPaths().
Enumerating all possible locations in different packages is error
prone, so add a new public function to generate the listing as a
string in the locations package. Adapt cmd/syncthing --paths to use
that instead of its own console output.
* lib/locations: Include CSRF token in pretty printed paths.
* lib/api: New endpoint /rest/system/paths.
The paths should be available for troubleshooting from a running
instance. Using the --paths CLI option is not easy in some
environments, so expose the locations mapping to a JSON endpoint.
Add utility function ListExpandedPaths() that also filters out any
entries which still contain variable placeholders.
* gui: List runtime paths in separate log viewer tab.
* Wrap paths.
* lib/syncthing: Utilize locations.Get() instead of passing an arg.
* Include base directories, move label to table caption.
* gui: Switch to hard-coded paths instead of iterating over all.
* gui: Break aboutModalView into tabs.
Use tabs to separate authors from included third-party software.
* gui: Move paths from log viewer to about modal.
* lib/locations: Adjust pretty print output order to match GUI.
* gui, authors: Remove additional bot names and fix indent.
The indentation changed because of the tabbed about dialog, fix the
authors script to respect that.
Skip Syncthing*Automation in authors list as well.
* Update AUTHORS list to remove bot names.
* Revert AUTHORS email order change.
* Do not emphasize DB and log file locations.
* Review line wrapping.
* review part 1: strings.Builder, naming
* Rename and extend locations.Set() with error handling.
Remodel the Override() function along the existing SetBaseDir() and
rename it to simply Set(). Make sure to use absolute paths when given
log file or GUI assets override options. Add proper error reporting
if that goes wrong.
* Remove obsolete comment about empty logfile option.
* Don't filter out unexpanded baseDir placeholders, only ${timestamp}.
* Restore behavior regarding special "-" logfile argument.
If the option is given, but with empty value, assume the no log
file (same as "-"). Don't try to convert the special value to an
absolute path though and document this fact in a comment for the Set()
function.
* Use template to check for location key validity.
* Don't filter out timestamp placeholders.
* lib/api: Remove paths from /rest/system/status.
* lib/ur: Properly initialize map in failure data (fixes#8479)
Co-authored-by: Jakob Borg <jakob@kastelo.net>
* gui: Use discovered IDs from cache when adding a new remote device.
The GUI already does refreshDiscoveryCache() when it comes online and
on every 10 second refresh cycle. Querying the same information
freshly in addDevice() seems unnecessary and adds some more round-trip
delay on a possibly slow network link. Instead use the IDs from the
existing discoveryCache property to populate the suggested ID list.
* Increase maximum suggested device ID count to 100.
For the auto-completion list, which is hidden by default and filtered
by the browser, we can offer more discovered device IDs without
causing much confusion. The list of suggested "nearby" devices is
still limited to the first five.
* Rename $scope.discoveryUnknown.
The old name "discovery" was pretty ambiguous..
Similar to the "remote has not accepted sharing" message, add a
footnote number 2 to indicate a folder which will not sync with a
certain device because the remote has paused it. Applies to the edit
folder / device modals' sharing tab, as well as the "shared with"
listing and tooltips under device and folder details.
Staggered File Versioning used to have its own cleanInterval that
controlled how often file versions were cleaned. Nowadays, there is a
seperate setting called cleanupIntervalS responsible for the cleanup,
which applies to all File Versioning (except External). Thus, remove the
unneeded code and don't set the param up on new folders anymore.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Allow to translate and fix incorrect Versions date filter ranges
Translate the previously English-only ranges used in Versions date
filter. In the process, fix the currently incorrect range calculation.
For instance, let us say it is 08:05. Selecting "today" should set the
range to start at 00:00 and end at 08:05. However, what really happens
is that both start and end are set to 08:05, and as a result "today" is
never shown to the user. The case is the same for "yesterday", which in
contrary to "today" is shown, but its range is fixed at 08:05 on the
previous day.
This commit fixes the above by always calculating "today" starting at
00:00 up to the current moment, and calculating "yesterday" from 00:00
on the previous to 00:00 on the current day.
When it comes to "last x days", the commit fixes the calculation so that
it actually covers the whole day, which is done by moving the start date
to 00:00 on the first day.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Translate fancytree messages in Versions modal
Currently, the default fancytree info/error messages are used. This
means that a) they are English-only, and b) they are very generic. With
this commit, the messages are added to the translatable strings, and
they are also more specifically related to file versioning.
On a side note, the "moreData" string has been left out on purpose, as
it is not used in the current code. It can be added later if needed.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Make ID read-only and hide nearby devices when adding pending devices (fixes#8083)
Currently, there is no distinction between adding "new" and "pending"
devices. For this reason, the user is always presented with a list of
"nearby devices" to choose from. This commit adds such distinction to
the code, and in the case of "pending" device, both the device ID is
made read-only and the nearby devices list is hidden.
As a by-product of the function rename and clean-up, this commit also
hides the non-functional "remove" button that is shown when editing
device defaults.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Emil Lundberg
bt90
d-volution
tomasz1986
Jakob Borg
Dimitri Papadopoulos Orfanos
Eric P
André Colomb
Boris Rybalkin
Aleksey Vasenev
luzpaz
Simon Frei