In case of second posix_memalign() failing, release memory allocated
in first posix_memalign() call.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We test 'force' twice with the second having not chance of
taking effect.
As a result a subsequent message - intended for use in the 'force'
case is never generated.
So remove the first test - it is unnecessary.
Reported-by: Jes.Sorensen@redhat.com
Signed-off-by: NeilBrown <neilb@suse.de>
search_mdstat and conf_match are almost identical.
Put all the functionality in conf_match, and remove search_mdstat.
Reported-by: Jes.Sorensen@redhat.com
Signed-off-by: NeilBrown <neilb@suse.de>
container_content retrieves volume information from disks in the
container. For unsupported volumes the function was not returning
mdinfo. When all volumes were unsupported the function was returning
NULL pointer to block actions on the volumes. Therefore, such volumes
were not activated in Incremental and Assembly. As side effect they
also could not be deleted using kill-subarray since "kill" function
requires to obtain a valid mdinfo from container_content.
This patch fixes the kill-subarray problem by allowing to obtain
mdinfo of all volumes types including unsupported and introducing new
array.status flags.
There are following changes:
1. Added MD_SB_BLOCK_VOLUME for blocking an array, other arrays in the
container can be activated.
2. Added MD_SB_BLOCK_CONTAINER_RESHAPE block container wide reshapes
(like changing disk numbers in arrays).
3. IMSM container_content handler is to load mdinfo for all volumes
and set both blocking flags in array.state field in mdinfo of
unsupported volumes. In case of some errors, all volumes can be
affected. Only blocked array is not activated (also reshaped as
result). The container wide reshapes are also blocked since by
metadata definition they require modifications of both arrays.
4. Incremental_container and Assemble functions check array.state and
do not activate volumes with blocking bits set.
5. assemble_container_content is changed to check container wide reshapes
before activating reshapes of assembled containers.
6. Grow_reshape and Grow_continue_command checks blocking bits
before starting reshapes or continueing (-G --continue) reshapes.
7. kill-subarray ignores array.state info and can remove requested array.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Per [1] GPT partition table entries are not guaranteed to be 128
bytes, in which case read() straight into a struct GPT_part_entry
would result in a buffer overflow corrupting the stack.
[1] http://en.wikipedia.org/wiki/GUID_Partition_Table
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array reshape (e.g. raid0->raid5 migration) is restarted during
array assembly, file system placed on this array cannot be mounted until
reshape is finished due to "busy" error.
This is caused when reshape is executed on array for external metadata
and array handle is cloned /forked/ to child process environment but not
closed.
Handle can't be closed before executing Grow_continue() because it is
used later in code.
Close unused handle in child process /reshape_container()/.
It is similar to close fd handle in reshape_array() before calling
manage_reshape()/child_monitor() in Grow.c:2290.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
gcc 4.6.1 doesn't like calculating a variable that then isn't
used. Remove it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
After migration from Raid 0 to Raid 10, the metadata is incorrect,
leaving one mirror disk marked as spare and one missing disk as a member
of the array.
The reason is that the metadata update code for spare activation
procedure takes into account one spare disk only, not checking
the following ones.
Signed-off-by: Lukasz Orlowski <lukasz.orlowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The metadata update code during spare activation is moved to a separate
function for clarity of code, as a prework for the next patch fixing
the bug.
Signed-off-by: Lukasz Orlowski <lukasz.orlowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This moves the lock handling out of Incremental_container() and relies
on the caller holding the lock. This prevents conflict with a
follow-on mdadm comment which may try and launch the device in
parallel.
This involves replacing a call to "Incremental" with an
unrolled version with just the case that calls Incremental_container
and so needs a call to ->load_container.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We need to force multiplication to use ULL before they
get to big, else it overflows. So move the "2ULL" to the start.
Signed-off-by: NeilBrown <neilb@suse.de>
The volume's name is saved in the array of chars.
All elements of the array can have nonzero values
and the next byte in memory does not have to have
the value of 0, so one must be cautious when
printing out the volume's name.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Using an array of chars without the terminating null byte
as a parameter of sprintf() function causes segfault
when dealing with SAS drives (with 20-digits serial number).
The memcpy() function is used instead.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Pinging the monitor for a NULL container is bad.
Reported-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Tested-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Signed-off-by: NeilBrown <neilb@suse.de>
readlink() returns the number of bytes in the buffer.
If we do something like
len = readlink(path, buf, sizeof(buf));
buf[len] = '\0';
we might write one byte past the end of the buffer.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: NeilBrown <neilb@suse.de>
So far there were 2 reshape continuation cases:
1. array is started /e.g. reshape was already invoked during initrd
start-up stage using "--freeze-reshape" option/
2. array is not started yet /"normal" assembling array under reshape case/
This patch narrows continuation cases in to single one. To do this
array should be started /set readonly in to array_state/ before calling
Grow_continue() function.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For 'resync' besides the update of migration type (imsm_vol.migr_type
structure) additionally status (imsm_dev.status) flag is set to
DEV_VERIFY_AND_FIX. In order to clean up after migration, status flag
must be cleared. For this reason, migration type shouldn't be set
directly but via set_migr_type(). Otherwise status does not reflect
the state of array.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Two problems.
1/ pol_merge was ignoring the pol_auto tag so any 'auto' information
was lost
2/ If a device had not path (e.g. loop devices) or if there were no
path-based policies, we didn't bother looking for policy at all.
So path-independant policies were ignored.
Reported-by: Christian Boltz <suse-beta@cboltz.de>
Signed-off-by: NeilBrown <neilb@suse.de>
During activation of spare disks, only one of all available
spare disks can be activated at this moment.
It causes that for example during take-over from
RAID0 with 2 disks to RAID10, only one of two spare disks
is taken for recovery and a degraded RAID10 array
with only 3 of 4 working disks is created.
It has been fixed by adding more than one of all available
spare disks and saving them in additional_test_list
which is passed to imsm_add_spare().
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch version is simplified compared to previous one.
There is no use of freeze_reshape flag in start_reshape(). It is assumed
that for reshape starting condition reshape_progress field contains
0 value /correct start position/. For reshape restart case, it contains
correct restart position. This approach doesn't make start_reshape()
difficult to read/manage and /imho/ kernel changes to change mdstat
reporting behavior are not necessary.
Setting correct position allows user to see it in the mdstat during
reshape restart and reshape process is not reported as resync.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reshape can be run for monitored arrays only /external metadata case/.
Before reshape can be executed, make sure that just starter array/container
is monitored. If not, run mdmon for it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Grow_continue() for external metadata should be executed on blocked
from monitoring array(s)/container.
Additional call to freeze() is not necessary in such case.
It produces meaningless error message only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If any reshape in container is active set recovery_blocked field.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container is assembled while reshape is active on one of its member
whole container can be required to be blocked from monitoring.
For such purpose field recovery blocked is added to mdinfo structure.
When metadata handler finds active reshape in container it should set
recovery_blocked field to disable whole container monitoring during
reshape.
For arrays that doesn't use containers, recovery_blocked field
has the same value as reshape_active field e.g. super0/1.
In fact,recovery is blocked during reshape for such arrays.
For ddf, metadata handler doesn't set reshape_active field,
so recovery_blocked is not set also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During reshape, resync/rebuild in the same container is not possible
due to fact that all arrays in container has to share the same disks set.
Block new resync/rebuild process initialization and setting resync_start
to 0 while any reshape in container is active. This avoids breaking
container reshape and doesn't allow for starting multiple processes
/resync/rebuild and reshape/ at the same time in md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Spare disk activation or starting repair for one array while on second
reshape is in progress, will lead to IMSM incompatible situation when
2 arrays in container shares different disks sets.
This can cause that 2 processes in container /reshape and rebuild/
are in progress in parallel. This is IMSM incompatible situation also.
Block spare disk activation and starting resync if any reshape in container
is in progress.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds to mdadm man the following information:
--continue
This option is complementary pair to assembly --freeze-reshape option.
It is needed when --grow operation is interrupted and it is not restarted
automatically due to --freeze-reshape usage during array assembly.
Option --continue has to be used together with -G , ( --grow ) command
and device that it should be executed on. All parameters required for
reshape continuation will be read from array metadata. If initial
--grow command had required --backup-file= option to be set,
continuation option will require to have exactly the same backup
file pointed to also.
Any other parameter passed together with --continue option will be ignored.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds to mdadm man the following information:
--freeze-reshape
Option is intended to be used in start-up scripts during initrd boot
phase. When array under reshape is assembled during initrd phase,
this option stops reshape after reshape critical section is being
restored. This happens before file system pivot operation and avoids lost
of file system context. Loosing file system context would cause
reshape to be broken.
Reshape can be continued later using -continue option for grow command.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Check if reshape restart position is the same as set in md.
If position doesn't match this means that we cannot restart reshape.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Jes Sorensen
NeilBrown
Labun, Marcin
Adam Kwolek
Lukasz Dorau
root
Lukasz Orlowski
Thomas Jarosch
Przemyslaw Czarnowski